• 수산해양기술연구
• /
• 제25권1호
• /
• pp.1-5
• /
• 1989

선박이 항해 중 침로와 속력의 변화가 NNSS 측위정도에 미치는 영향을 분석하기 위해 위성별, 위성통과방향별, 앙각별로 계산기 simulation한 결과는 다음과 같다. 1. 위성의 앙각과 통과방향이 일정한 경우 위성의 종류에 따른 측위정도는 그 차이가 거의 없었다. 2. 속력오차에 의한 측위정도는 선속의 대소에는 관계없이 선속오차의 절대치에 비례하고 선박의 침로에 따라 달라진다. 3. 속력오차가 일정할 경우 위성의 통과방향에 따라 측위정도가 달라지며 동측북상과 서측남하인 경우와 서측북상과 동측남하인 경우는 서로 비슷한 측위정도를 나타내었다. 4. 선박의 침로가 남북방향일 때가 동서방향일 때보다도 오차가 크며 앙각이 높을수록 오차도 더욱 컸다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.144-147
• /
• 2004

Two different sensors (here, KOMPSAT and RADARSAT) are considered for ship detection, and are used to delineate the detection performance for their data. The experiments are set for coastal regions of Mokpo Port and Ulsan Port and field experiments on board pilot boat are conducted to collect in situ ship validation information such as ship type and length. This paper introduce mainly the experiment result of ship detection by both RADARSAT SAR imagery and landbased RADAR data, operated by the local Authority of South Korea, so called vessel traffic system (VTS) radar. Fine imagery of Ulsan Port was acquired on June 19, 2004 and in-situ data such as wind speed and direction, taking pictures of ships and natural features were obtained aboard a pilot ship. North winds, with a maximum speed of 3.1 m/s were recorded. Ship's position, size and shape and natural features of breakwaters, oil pipeline and alongside ship were compared using SAR and VTS. It is shown that KOMPSAT/EOC has a good performance in the detection of a moving ship at a speed of 7 kts or more an hour that ship and its wake can be imaged. The detection capability of RADARSAT doesn't matter how fast ship is running and depends on a ship itself, e.g. its material, length and type. Our results indicate that SAR can be applicable to automated ship detection for a VTS and SAR combination service.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.41-47
• /
• 2006

Naval combat system is total management system integrating a ship and several weapon system functions. For the mission of a ship, naval combat system manages features and constraints of each weapon system. Proper treats of each weapon system's conditions guarantee effective performances of naval combat system. In this paper, the relationship of anti-air weapon system's on board position and self-defence effectiveness against anti-surface missiles is studied

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 춘계학술대회
• /
• pp.349-354
• /
• 2011

This paper addresses the trajectory tracking problem for ship berthing using sliding mode technique. With significant potential advantages: insensitivity to plant nonlinearities, parameter variations, remarkable stability and performance robustness with environmental disturbances, the multivariable sliding modes controller is proposed for solving trajectory tracking of ship in harbor area. In this study, the ship position and heading angle are simultaneously tracked to guarantees that the ship follows a given path (geometric task) with desired velocities (dynamic task). The stability of the proposed control law is proved based on Lyapunov theory. The proposed approach has been simulated on a computer model of a supply vessel with good results.

• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1982-1992
• /
• 1999

This paper presents a novel concept of cargo handling system adapted for a sea port subjected to severe time-varying tide. The proposed system can perform loading or unloading by using a sort of hydraulic elevator associated with real-time position control. In order to achieve a proof-of-concept, a small-sized laboratory model of the cargo handling system is designed and built. The model consists of three principal components container palette transfer (CPT) car, platform with lifting columns, and cargo ship. The platform activated by electro-rheological (ER) valve-cylinders is actively controlled to track the position of the cargo ship subjected to be varied due to the time-varying tide and wave motion. Following the derivation of the dynamic model for the platform and cargo ship motions, an appropriate control scheme is formulated and implemented. The location of the CPT car is sensed by a set of photoelectric switches and controlled via sequence controller. On the other hand, a sliding mode controller (SMC) is adopted as the position controller for the platform. Both simulated and measured control results are presented to demonstrate the effectiveness of the proposed cargo system.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.68-75
• /
• 2008

This paper describes the design and implementation of a low cost inertial navigation system(INS) using an inertial measurement unit(IMU), a digital compass, GPS, and an embedded system. The system has been developed for a transporter that load and unload ship blocks in a shipbuilding yard. When the transporter would move from place to place, they would periodically pass under obstructions that would obscure the GPS signal. This increases the error when estimating the position. Thus the INS has been used to improve position accuracy. INS is also capable of providing continuous estimates of the transporter's position and orientation. Even though IMU is typically very expensive, this INS is made of "low cost" components and the indirect Kalman filtering algorithm.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권1호
• /
• pp.17-22
• /
• 2005

해난사고에 의한 선박 표류시 신속한 수색 구조를 지원하기 위한 실시간 표류선박 위치추정시스템 구축의 기초연구로서 실제 해상에서의 선박 표류 거동을 관측하였으며, 환경외력조건에 대한 선박의 규모별 거동특성을 분석하였다. 본 연구의 실험에서는 G/T 10톤급 선박, 20톤급 선박, 50톤급 선박, 80톤급 선박 그리고 구명정(life raft)등 5종류의 선박을 대상으로 하였으며, 표류선박의 위치는 DGPS(Differential Global Positioning System)와 VHF 무전기를 이용한 자동위치발신기(APRS: Automatic Position Reporting System)를 자체 제작하여 측정하였다. 표류 대상선박 중 GH 50톤급 선반에서는 위치 측정과 동시에 표류 경로상의 해수유동, 바람, 선수각(Heading angle)등도 함께 측정하였다. 본 실험의 모든 관측에서 시간간격은 1분으로 동일하게 적용하였다. 실험결과에서 표류선박은 풍속의 3％∼5％의 속도로 표류하는 것으로 나타났으며, 표류방향은 풍향의 법선방향으로 나타났다.

• 해양환경안전학회지
• /
• 제27권1호
• /
• pp.38-46
• /
• 2021

4차 산업혁명 시대를 맞이하면서 첨단기술이 산업 전반에 사용됨에 따라 자율운항선박기술에 대한 관심이 고조되고 있다. 이에 본 연구에서는 자율운항선박에 대한 기초 연구로써 모형 선박을 제작하고 드론에 사용되는 아두파일럿(Ardupilot)을 적용시켜 자율운항 제어 시스템을 구축하였다. 구축된 모형선을 활용하여 다양한 항해계획을 실행함으로써 자율운항 선박의 운항 자동제어 가능성을 확인하였다. 침로안정성 실험에서는 모형선이 정해진 침로를 똑바로 따라가지 못하고 지그재그(S자 형태)로 항행하면서 침로에서 최대 5.4 m(4.5 L) 이탈하였으며, 매개변수를 수정하여 이탈거리를 최대 1.8 m(1.5 L)까지 감소시켰다. 선회성능 실험에서는 선회권의 직경이 최대 약 9.3 m(7.8 L)로 나타났는데 매개변수를 수정하여도 큰 변화를 확인할 수 없었다. 하지만 WP 도착 전 감속하도록 실험한 결과 선회권의 직경이 최대 약 3.2 m(2.7 L)로 감소된 것을 확인할 수 있었다. 정지성능을 평가하기 위해 모든 실험의 마지막 정지 예정 위치와 실제 모형선이 정지한 위치를 상호 비교하였으며, 정지 예정 위치로부터 최소 0.4 m(0.3 L), 최대 6.2 m(5.2 L) 떨어진 지점에서 모형선이 정지하였음을 확인할 수 있었다. 추후 다양한 매개변수의 수정·보완을 통한 성능 향상이 이루어진다면 자동제어를 통한 자율운항선박의 자동접안을 위한 연구를 진행할 계획이다.

• 수산해양기술연구
• /
• 제58권3호
• /
• pp.230-240
• /
• 2022

In general, a high tension on the anchor and chain is placed when a ship at anchor is subjected to heavy weather. Mariners have to pay attention to whether dragging anchor occurs to keep the safety of the ship at anchorage since it is difficult to maintain the stable motion of ship and it causes collisions with other ships nearby. In this paper, the ship motion against the external forces was shown to obtain the fundamental data about characteristic of holding power due to nature of seabed at anchor, so practical trials were carried out in rocky area and muddy area using a trial ship around coastal area of South Korea. In muddy seabed, holding power showed reasonable tension values depending on the distance from anchor position of continuing swing motions of a ship corresponding to wind force. Meanwhile in rocky seabed, tension values on the chain appeared very high occasionally regardless of the distance from the anchor position and seemed to exceed its holding power to be the breaking strain of the chain although weather was not in a severe condition. Therefore, some of the cables laid on the seabed were presumed to be caught in a crack on the rock. It is assumed that even a small amount of external force may cause the chain to break in a moment in rocky seabed. Additionally, wind and current forces had a somewhat contradictory effect on holding power of the ship between them.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권8호
• /
• pp.3350-3365
• /
• 2020

A considerable literature has recently grown up on the theme of ship wireless communications. However, much of the research up to now has been descriptive in the offshore area. There has been little quantitative analysis of wireless communication in inland waterways, which has received considerable attention lately. Until now, only the effects on inland river environment are examined. What is less clear is the nature of channel change caused by the antenna movement. Here we explore the moving ship-to-fixed-ship fading characteristics at 5.9 GHz for an inland waterway in the city center of China. The ship motion trajectory is designed in order to determine the effect of changes in the antenna position. We evaluate the channel fading characteristics of inland waterway, which are highly correlated with the distance between transmitter and receiver. We demonstrate that the line-of-sight component, as well as the components from multipath with obstruction reflections, contributes largely to the mean power gap. Our findings reveal critical ship-to-ship characteristics in inland waterway, which definitely contribute to the field of ship wireless communications.