• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.3
• /
• pp.228-235
• /
• 2021

Marine accidents caused by ships are very diverse, such as collision, sinking, stranding, grounding and fire. In particular, persons on passenger ship are unspecified and not trained, so it makes evacuation harder. For this reason, an evacuation plan that considers diverse situation in ship is needed. Effective evacuation planning requires training in consideration of various evacuation situations. In this paper, we investigated the time elapsed on evacuation in various situations from "HANMIR," the fishery training ship of the Korean Institute of Maritime and Fisheries Technology, using a Ship Evacuation Analysis Program (SEA-Pro) which is introduced to the society. We assumed a situation that has not only inconveniences for real training but also the possibilities of happening. Not all trainees are resting in their cabin, so we assumed positions such as they are in the bridge or engine room and applied fire and flooding situations. We assumed that the time for alerting the situation would be short, so we applied only elapsed time of movement. Those analyses could be helpful in three ways. The first is predicting the consequence of possible accidents. There are some conditions that can be appliable to this model, such as the decreased area of sight in those situations. The second is concluding the optimal limit of carriage and placement of safety instruments on building a new ship. The third is to be a base data for ships to make a new effective evacuation plan based on these analyses.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.454-462
• /
• 2021

The purpose of this paper is to compare and analyze the status of ship departures by major ports in Korea. To this end, we collected necessary data from the National Statistical Office (National Statistical Portal), "Transportation·Logistics ⇨ Ship Departure Status by Port". The analysis period is 141 months from January 2009 to September 2020. The increase rate was higher in the order of Yeosu, Pyeongtaek Dangjin, Gwangyang, Busan, Incheon and Ulsan. In the analysis of the rate of change, Yeosu showed an uptrend while other ports showed a modest downtrend. In the scatter analysis, the total ship departure shows a high degree of synchronization with other ports except Yeosu. As a result of the empirical analysis, the recent trend of ship departures is slowly falling below 0%, and the current movement is expected to continue for the time being. As the southern logistics of China and ASEAN and northern logistics of Eurasia become active, the role of major ports is expected to expand further. It is necessary to develop a differentiated logistics service for each port and find an efficient way to increase the volume of goods by deriving factors for improving logistics.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.139-145
• /
• 2017

Recently, gusts, typhoon and tsunamis have been occurring more frequently around the world. In such an emergency situation, a moored vessel can be used to predict and analyze other vessel behavior, but if the mooring system is destroyed, marine casualties can occur. Therefore, it is necessary to determine quantitatively whether a vessel should be kept in the harbour or evacuate. In this study, moored ship safety in an exclusive wharf according to swell effects on motion and mooring load have been investigated using numerical simulations. The maximum tension exerted on mooring lines exceeded the Safety Working Load for intervals 12 and 15 seconds. The maximum bollard force also exceeded 35 tons (allowable force) in all evaluation cases. The surge motion criteria result for safe working conditions exceeded 3 meters more than the wave period 12 seconds with a wind speed of 25 knots. As a result, a risk rating matrix (risk category- very high risk, high risk and moderate risk) was developed with reference to major external forces such as wind force, wave height and wave periods to provide criteria for determining the control of capabilities of mooring systems to prevent accidents.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.4
• /
• pp.422-429
• /
• 2018

To make students recognize the danger of fire smoke that may occur in ships and to improve the response capability, spaces for safety educ ation were built inside the training ship, and scenarios were developed. This study is an analysis of the movement characteristics of the students acquire d under each scenario. Followings are the summary of the analysis results. In the non-smoke environments, there was no difference in the velocity of escape movement between the case of without block on the familiar route and the case of with unexpected block. However, when the indoor was filled with smoke, the visibility became very low because of the smoke density and the average velocity was 62.5 % slower than the case where it was not. Regardless of the scenarios, the average equivalent velocity on the complex path was faster than the simple straight path, and the standard deviation was smaller. Under the smoke-fullfilled environment, although the relative velocity probability distributions of the complex passage and the entire passag e are very similar, the inter-individual fluctuation of the relative velocity ratio of the complex passage to that of the entire passage was very large. On the other hand, equivalent velocity could be expressed by the logarithmic function of the visibility. Also, as the tension of the students increased, the equivalent velocities were accelerated on all scenarios.

• Journal of Navigation and Port Research
• /
• v.44 no.4
• /
• pp.275-282
• /
• 2020

Recently, the occurrence of a ship capsizing was analyzed as the main cause of the lack of stability or loss because of the improper management of the center of gravity, the movement of cargo or heavy weight when excessive steering occurs or when navigating during bad weather. Thus, to prevent a ship from capsizing, it is necessary to secure stability to enable the ship's return to its upright position, even if a dangerous heel occurs. The GM is a crucial evaluation factor regarding stability, which the navigation officer uses to preserve stability. In this study, based on the stability data collected from the operating of ships for five years, The GM by ship's type according to the operating status was analyzed specifically such as a ship's length, breadth, and gross tonnage. The feature of the GM distribution according to a ship's length was confirmed, and after performing the correlation analysis between the breadth and the GM, the ratio of the GM to breadth was calculated, and the result was compared with the previous ratio. Additionally, a simple approximation formula and minimum GM for the estimation of the GM by ship type were proposed by the regression analysis of the GM using the gross tonnage (GT)/breadth (B) to reflect the trend of larger ships being built. The results of this study are expected to be used as data for the review of securing a stable GM on ships.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.42-48
• /
• 2014

Seasickness not only makes persons on board vessels to vomit but also causes vertigo, headache, sleepiness, fatigue, lethargy and other discomforts. This ailment leads to disturbance of biorhythm and decline of perception which would eventually cause reduction of situational awareness among ship's operators that leads to marine accident. This study is about the sensitivity of people onboard ships to seasickness and focused on deck or navigation officer cadets(apprentice officers) and engine officer cadets(apprentice engineers) who have no previous experiences on board. It is conducted by using motion sensor that can measure ship's X, Y, Z-axis motions and through the questionnaire survey, and evaluated each students' degree of seasickness symptoms. Through this study, in same circumstance, we have known that there are different degrees of motion sickness for wheel house worker and engine room worker, It also confirmed that seasickness have high relationship with degree of hull motion and also, with cycle of hull motion. In addition, we have confirmed that Z-axis hull movement has higher relationship with seasickness than X-axis and Y-axis hull movements. This study aims to initiate additional researches about X-axis and Y-axis of the ship's motion which it expects to greatly enhance safety of wheelhouse and engine room personnel, ship's livability and comfortable sailing.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.77-84
• /
• 2000

In measurement of ship speed with a Doppler log sensor, we encounter the nonhorizontal movement of a ship, i.e. pitching and rolling, and that causes inaccuracy of the measurement. In this study, we develop a Janus type ultrasonic transducer that can resolve the problems in accuracy due to the pitching and other environmental factors of common ultrasonic sensors attributed to the underwater usage. For the development, we analyze the operation mechanism of the transducer, fabricate a prototype of the sensor, and evaluate its performance through experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.8
• /
• pp.740-744
• /
• 2008

In this paper, we propose a new time-to-go estimation filter for PN guided missiles. The proposed estimator is derived based on the approximation of the length of the PNG homing trajectory that we newly introduced using the special coordinate system. The coordinate system is convenient for taking the target movement into account. In addition, compared with the previous time-to-go estimation techniques, the parameters required for evaluating the length can be obtained only with the seeker measurements. Moreover, the seeker measurement error statistics can effectively be considered since our filter is derived based on the Kalman filter theory. Simulation result for a typical anti-ship see-skimming missile homing trajectory shows the excellent performance of the proposed filter.

• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.449-453
• /
• 2002

Recently a ship manoeuvring simulator has been developed by Korea Maritime University. We are desiring to apply the movement of wave to the visual scene of sea state in the simulator. This paper discussed the calculation method and visualization simulation of three dimensional sea state using OpenGL API, and the possibility to apply calculation result to the simulator.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.230-232
• /
• 2019

There is an accelerating need for ocean sensing where autonomous vehicles can play a key role in assisting engineers, researcher and scientists with environmental monitoring and collecting oceanographic data. This paper is performed to develops an autonomous sailing drone to be used as a sensor carrying platform for autonomous data acquisition at Sea. From a sailing drone design viewpoint, it is important to establish reliable prediction methods for sailing drone's resistance. The required power for the propulsion unit depends on the ship resistance and speed. There are three solutions for the prediction of ship resistance as follow analytical methods, model tests in tanks and Computational Fluid Dynamics (CFD). The present paper aims at simulating sailing drone friction resistance using numerical method. The dynamic mesh motion is used to describe the sailing drone movement.