• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2007년도 추계학술발표회
• /
• pp.29-33
• /
• 2007

선박의 항주에 의해 발생하는 항주파의 현장관측을 수행하였다. 파랑데이터는 선박의 항로에서 625m 이격된 지점에서 초음파식 파고계를 이용하여 12시간동안 5Hz로 관측하였다. 관측데이터 분석결과 이 해역이 파랑은 정상적인 기상상태에서는 항주파가 현저한 원인으로 분석 되었으며, 대형여객선과 쾌속여객선의 항주파가 중첩될 때 최대파고 82.6cm로 관측되었다. 불규칙하지만 현저한 방향특성을 가지는 개방수역의 풍파와 비교하여 항내의 항주파는 매우 복잡한 형태를 나타냈다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 추계학술대회
• /
• pp.116-118
• /
• 2023

최근 환경오염에 대한 규제 강화로 인해 선박 운항은 경제적이며 지속가능한 최적화 항법에 대한 필요성이 대두되고 있다. 하지만 기상예보 기술의 발전에도 불구하고, 여전히 잘못된 기상예보로 인한 악천후에 조우하는 선박 사고들은 지속적으로 발생하고 있다. 본 연구에서는 악천후에 조우하는 선박의 실태를 파악하고 분석하기 위해, 운항중인 선박의 정보를 측정하고자 하였다. 여기서 측정한 데이터의 종류는 항해 (위치, 속도, 방위, 타각 등) 및 엔진 (엔진 회전수, 출력, 축 추력, 연료 소비량) 관련 정보, 기상 상태 (바람, 파도), 선박운동 (선박종, 횡운동 등) 등의 정보들이 포함되었다. 실측 실험을 시행한 선박의 종류는 28,000 DWT급 벌크선, 63,000 DWT급 벌크선, 20,000 TEU급 컨테이너선, 12,000 TEU급 컨테이너선박이다. 각 선박의 실선실험은 여러 가지 종류의 데이터를 각각 취득하여 다목적으로 선박 운항에 관련한 연구들에 활용하고자 한다. 또한 실선실험 시의 해상 상태를 확인하기 위해, 파도 시뮬레이션 모델을 이용하여 방향성 파랑 스펙트럼 등을 재현하였다. 실선 실험의 데이터 취득 및 파도 시뮬레이션 결과 등을 통하여, 선박레이더를 이용한 정확한 파도정보 파악 및 화물 붕괴 사고 등에 대한 연구를 진행하고 있다. 이에 더불어, 선박운항의 안전성 및 효율성 관점에서 다양하게 활용될 것으로 기대된다.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4077-4082
• /
• 2023

Large areas must be rapidly screened to monitor radiation in marine environments. For this purpose, this study developed a mobile real-time gamma-ray measurement system for shipboard use and evaluated its performance. The system was developed to measure engine or generator cooling water by installing a canister inside the ship. The minimum detectable activity of the system is about 0.8 Bq/L for a 60 s measurement period, and real-time data transmission and remote control are possible. The system was tested in the field and is currently being installed and operated on ships in service. Such a ship-based real-time gamma-radiation measurement system is suitable for a wide range of marine radiation surveillance applications and is expected to be rapidly deployed.

• 대한조선학회논문집
• /
• 제45권2호
• /
• pp.144-150
• /
• 2008

Ships and offshore structures are exposed to wave and engine excitation loadings during navigation and cargo/ballasting operations. These excessive loads may cause damages to hull and may result loss of life the ship. Therefore, it is important to develop a system that allow accurate measurements of global hull loads. The objective of the study is developing a fiber optic monitoring system that is capable of monitoring, recording and warning of the vessel performance. A method for measurement of global loads on a vessel, using strain measurements from a network of fiber optic strain sensors and extensive finite-element analyses(FEA) with idealistic load cases, is presented. The method has been successfully validated on the idealized ship structure model with strain sensors.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.368-372
• /
• 2008

Habitability is one of the most important points when a passenger ship is cruising. In particular, anti-vibration design should be considered preferentially to offer passenger a comfort cabin and leisure space. But, a passenger ship is different from a general commercial ship in the view point of the structural arrangement. It is restricted within narrow limits to reinforce wide panels and local structures of a passenger ship because of its interior design. Moreover, the allowable vibratory limits for a passenger ship are much lower than those of a commercial ship. In this study are introduced the procedure of the vibration analysis, the structural improvement method for prevention of vibration and the results of vibration measurement during exciter test and sea trials.

• 품질경영학회지
• /
• 제29권4호
• /
• pp.18-37
• /
• 2001

On this research, recognizing that ship inspection and audit services are closely related in Improving ship safety, the importance of active quality managements of ship inspection and audit services have been notified. For this research, based on previous research results, Quality managements of ship inspection and audit services were divided into the following aspects; the source of quality managements, execution of quality managements and outcome of quality managements. The results of this study is as follows. Overall, it is clearly shown that the elements of quality managements execution such as management responsibilities, resource management., product realization, measurement and analyzation, and improvement had also acted as a mediator between the relation of quality managements source and outcome.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.84-84
• /
• 2018

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1997년도 영남지회 학술발표회 논문집 Acoustic Society of Korean Youngnam Chapter Symposium Proceedings
• /
• pp.68-74
• /
• 1997

Ship radiated noise is an infortant parameter which dtermines Anti Submarine Warfare(ASW) countermeansure or passive Sonar detection and classification performance. Its measurement should be performed under controlled ocean acoustic environment. In data reduction of the measured data from hydrophone array, theeffect fo ambient noise, surface reflection and bottom reflection etc. should be compensated to obtain the source level of the ship radiated noise. This study describes the measurement hydrophone array design criteria based on the analysis of transimission anomaly due to the surface reflection.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.255-255
• /
• 2017

• 한국항해항만학회지
• /
• 제33권2호
• /
• pp.99-104
• /
• 2009

The Kinematic GPS is well known to provide a quite good accuracy of positioning within an level. Although kinematic GPS assures high precision measurement on the basis of an appreciable distance between a reference station and an observational point, it has measurable distance restriction within 20 km from a reference station on land. Therefore, it is necessary to make out a simple and low-cost method to obtain accurate positioning information without distance restriction In this paper, the velocity integration method to get the precise velocity information of a ship is explained. The experimental results of Zig-zag maneuver and Williamson turn as the ship's maneuvering test, and other experimental results of ship's movement during leaving and entering the port with low speed were shown. From the experimental results, ship's course, speed and position are compared with those obtained by kinematic-GPS, velocity integration method and dead reckoning position using Gyro-compass and Doppler-log.