• 대한조선학회논문집
• /
• 제58권5호
• /
• pp.314-321
• /
• 2021

In the existing whole ship analysis, topside was modeled as mass element. However recently, the topside is modeled as beam element due to the owner's requirement to improve the maturity of the whole ship FE model. To follow the owner'srequirement, detailed information for topside drawing and modeling, which may delay analysis schedule, is needed. However, it is hard to respond effectively to this matter due to the lack of study on the topside from the hull perspective. Therefore in this study, the effect of the topside on the hull is investigated when the topside is modeled as a mass element or beam element respectively. In addition, the interface modeling method is analyzed to verify modeling method used in the existing whole ship analysis. The results indicate that the interface and topside modeling method used in existing whole ship analysis are appropriate. This conclusion will be the technical basis for responding to owner's requirement about the topside modeling method.

• 한국항해학회지
• /
• 제25권4호
• /
• pp.417-422
• /
• 2001

Every ship might be exposed to collision, grounding and/or various accidents. They may make some underwater holes on the hull. An underwater damage would cause her loss of buoyancy, trim, and inclination. Although a ship has some provisions against these accidents, if the circumstance is serious, she would be sunk or upsetted. Because of varieties of type of accidents, one could not prepare all of them. Many subdivision could prevent them, but it is difficult to realize it due to rising costs. This paper deals with physical phenomena of sinkage and an application on box type ship, and some results are earned as follows； 1. sinkage speed up to the level of the damage hole is increased proportionally, and is decreased proportionally after filling the level. 2. the curve of draft shows cup type of second order polynomial up to the damage hole level, and shows cap type of second order polynomial after filling the level. 3. if damage occurs beneath half of the draft, changes of head and displacement, and sinking speed follow almost straight lines. 4. by careful observation, sinkage speed could be predicted.

• Journal of Mechanical Science and Technology
• /
• 제15권11호
• /
• pp.1548-1554
• /
• 2001

Flow patterns and dynamic properties of two-stage Weis-Fogh type ship propulsion mechanism are studied by a discrete vortex method. To study mutual interference between two wings, two cases are con sidered - wing motions with the same and reverse phases. The predicted flow patterns correspond to the available flow visualization results. Time histories of thrust and drag coefficients are also calculated, and the interference between the two wings are numerically clarified.

• Structural Engineering and Mechanics
• /
• 제52권3호
• /
• pp.613-632
• /
• 2014

In the early design stage of ships, the two most important structural analyses are performed to identify the structural capacity and safety. The first step is called global strength analysis (longitudinal strength analysis or hull girder strength analysis) and the second step is local buckling analysis (stiffened panel strength analysis). This paper deals with the ultimate strength performance of Arctic Sea Route-going commercial ships considering the effect of low temperature. In this study, two types of structural analyses are performed in Arctic sea conditions. Three types of ship namely oil tanker, bulk carrier and container ship with four different sizes (in total 12 vessels) are tested in four low temperatures (-20, -40, -60 and $-800^{\circ}C$), which are based on the Arctic environment and room temperature ($20^{\circ}C$). The ultimate strength performance is analysed with ALPS/HULL progressive hull collapse analysis code for ship hulls, then ALPS/ULSAP supersize finite element method for stiffened panels. The obtained results are summarised in terms of temperature, vessel type, vessel size, loading type and other effects. The important insights and outcomes are documented.

• 해양환경안전학회지
• /
• 제3권1호
• /
• pp.93-98
• /
• 1997

When navigating at sea, informations like other ship's particular are very important to navigator who should make a safe maneuvering. Most of all is obtained through the optical observation and/or the radiotelephone communication, but it is not easy to perceive them when the visibility is restricted or there is some hardness in communication. In this study, we suggest the algorithm that measures the ship's length and speed on the radar screen and estimates the ship's particular such as gross tonnage, breath and type on the base of above two factors.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.67-75
• /
• 2011

Pyomindaehwa is a study book written in Korean and it takes a form of an investigation document made up of a conversation between Chosen's castaways and an interpreter taking place in Naesirogawa and Satsuma on the south end of Kyushu, Japan in the 19th century. This book is in three volumes. Many terminologies such as timber parts, sail, rigging and equipment have been shown in the last volume, which is mainly about a repairing process of drifting ship. Especially, timber parts' terminologies including hull's term were schematized in Kumamoto Text(1854b). This study have attempted to find out Naval architectural clues helping estimate actual drifting ship's type and bulk on the evidence of the contents. Based on the studies, it is possible to presume the type of Korean boats and ships, which are similar with the ones from database of 21 traditional fishing boats in the report on Investigation of Korean fishing boats studied previously. This paper has shown the logical process of presumption of types of boats.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.438-441
• /
• 2004

Reduction of a ship's rolling is the most important performance requirement for improving the safety of the crew on board and preventing damage to cargos as well as improving the comfort of the ride. A mass driving anti-rolling system (MD-ARS) might be one candidate of several systems against the ship's rolling. In this paper, a sea-trial test on a pendulum-type MD-ARS passively operated is carried out in Suyoung, Busan. After the system is installed on the cabin of the small leisure boat, a series of test is conducted before and after operating the system. Through the test, it is confirmed that the roll rate of the ship is pretty well reduced by the system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.132-137
• /
• 2003

연안을 항해하는 소형선박에 탑재하여 위성방송을 수신할 수 있는 Az(Azimuth: 방위각) 1축 마운트의 추적시스템을 구현하여 추적성능을 분석하였다. 소형선박용 위성방송 수신시스템은 소형, 경량, 단순조작, 저가형으로 실현되어야 하기 때문에 1축 Az 마운트가 적합하다. 안테나는 패치어레이의 평판형을 사용하였고 마운트는 스텝모터로 구동되도록 설계하였다. 알고리즘은 위성의 포인트를 추적을 위한 스텝트랙과 선박의 동요성분을 역으로 보상하는 동요보정이 병행되도록 작성하였다. 동요성분을 검출하기 위하여 자이로형 각속도센서를 활용하였고, 비교기, ADC 둥의 인터페이스회로와 마이크로프로세서를 사용하여 시스템을 구현하였다. 연안여객선에 시제품을 탑재하여 선회 및 동요의 정도에 따른 수신입력 레벨의 변동을 그래프로 기록하여 추적 성능을 분석하였다.

• 한국정보통신학회논문지
• /
• 제7권6호
• /
• pp.1130-1137
• /
• 2003

연안을 항해하는 소형선박에 탑재하여 위성방송을 수신할 수 있는 Az(Azimuth: 방위각 ) 1축 마운트의 추적시스템을 구현하여 추적성능을 분석하였다. 소형선박용 위성방송 수신시스템은 소형, 경량, 단순조작, 저가형으로 실현되어야 하기 때문에 l축 Ak 마운트가 적합하다. 안테나는 패치어레이의 평판형을 사용하였고 마운트는 스텝모터로 구동되도록 설계하였다. 알고리즘은 위성의 포인트를 추적을 위한 스텝트랙과 선박의 동요성분을 역으로 보상하는 동요보정이 병행되도록 작성하였다. 동요성분을 검출하기 위하여 자이로형 각 속도센서를 활용하였고, 비교기, ADC 등의 인터페이스회로와 마이크로프로세서를 사용하여 시스템을 구현하였다. 연안여객선에 시제품을 탑재하여 선회 및 동요의 정도에 따른 수신입력 레벨의 변동을 그래프로 기록하여 추적 성능을 분석하였다.

• 대한조선학회지
• /
• 제14권2호
• /
• pp.1-9
• /
• 1977

Streamlines around a ship's hull can be calculated by using streamline tracing method replacing the ship section with distribution of singularity. The influence of frame lines on the stream surrounding a hull surface, however, can not be found. Jinnaka studied on streamlines for Lewis form by applying the slender body theory. The influence of frame lines on stream surrounding a hull surface is well found in Jinnaka's method. In this paper streamline calculation method for chine type has been developed by using conformal transformation and applying slender body theory as Jinnaka did. Three kinds of model-one of series 62 for chine type, V.L.C.C. and high speed craft built in Korea for Lewis form-were used for streamline calculation;