• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.726-730
• /
• 2001

Temperature stabilities of dielectric constraints and resonant frequencies of the substrates are very important in piezoelectric ceramics oscillators and filters. In this study, it was investigated temperature stability of the length-extensional vibration mode of Pb(Zr$\_$y/Ti$\_$1-y/)O$_3$+x[wt%]Cr$_2$O$_3$ ceramics. The mode can be utilized in fabricating ultra-small 455 kHz IF devices. Addition of Cr$_2$O$_3$ in morphotrophic phase PZT decreased the variations of dielectric constant, electro-mechanical coupling factor k$\_$31/ and resonant frequency by thermal shock. As additive weight of Cr$_2$O$_3$increased, the temperature coefficient of resonant frequency changed from positive number to negative one. And the composition tith temperature coefficient of resonant frequency was shifted to the one with increased Cr$_2$O$_3$ additive weigh by thermal aging.

• Journal of Plant Biology
• /
• v.36 no.1
• /
• pp.59-66
• /
• 1993

In maize coleoptile segments where auxin transport capacity decreases with time following excision, susceptability of the tissue to transport inhibitors such as N-1-naphthylphthalamic acid (NPA), 3,4,5-triiodobenzoic acid (TIBA) or high concentrations of IAA was found to be rather increased. A time-dependent increase in the sensitivity to NPA can be postulated since the dose-response curve for NPA was shifted in the‘aged’tissue to the left (i.e. lower concentration). Preincubation of the tissue at a low temperature abolished the time-dependent sensitivity change, suggesting that cellular metabolism could be involved. The NPA-sensitive state was also brought about by calcium depletion of the tissue, which can be partially reversed by addition of calcium. Presence of exogenous IAA in the preincubation medium kept the auxin transport system from decay, implicating auxin as an endogenous controlling factor. Results of our experiments indicate a reversible, time-dependent changes of auxin transport system in which transport capacity and sensitivity to NPA are tightly coupled. Changes in the sensitivity to NPA were also seen in auxin action as well.

• Journal of the Korean Home Economics Association
• /
• v.26 no.4
• /
• pp.53-65
• /
• 1988

In the study, the dietary survey was conducted in Seoul, Dae-jeon, Gwangju, Pusan, from march to April in 1988. A Questionnaire was prepared and distributed to 1583 house wives in order to find out their attitude of meal management and their way of thinking in dietary life. The results were summarized as follows: 1) 34.4% of the subjects prepared daily menu. In planning menu, the major consideration shifted from husband to all family members and the most emphasizes meal changed from breakfast to supper. 2) Most of the subjects were making use of substitute food. They were satisfied with the convenience and taste of the convenience foods. Improvements in nutrition, sanitation and price of convenience food made increase of its consumption. 3) The survey has shown that the main purpose of eating is to satisfy nutrition. and in the choice of food, most subjects regarded its taste as the most important factor.

• Journal of the Korean Ceramic Society
• /
• v.35 no.8
• /
• pp.864-870
• /
• 1998

The effect of {{{{ {{Nb }_{2 }O }_{5 } }} and CoO addition on the temperature dependence of the {{{{ {BaTiO }_{3 } }}-based ceramic capa-citor has been studied. X7R with moderate temperature dependence has been developed by means of pre-cisely controlled {{{{ {{Nb }_{2 }O }_{5 } }}/CoO ratio. Dielectric constant(K) and dissipation factor(DF) were 3500 and 1.5% respectively. As the content of {{{{ {{Nb }_{2 }O }_{5 } }} was increased the curie temperature(Tc) was shifted to lower tem-perature and the dielectric constant at Tc was decreased. The proper addition of CoO with {{{{ {{Nb }_{2 }O }_{5 } }} improved the temperature dependence of dielectric properties of the {{{{ {BaTiO }_{3 } }}-based ceramic capacitor.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.2
• /
• pp.129-137
• /
• 2000

In the prototype stage of a car developing program, the efficiency of trouble shooting is an important factor to be considered. Structural modifications by the design sensitivity analysis are applied to a steering wheel system for improving the idle vibration of the prototype passenger car. For the design sensitivity analysis, the experimental modal analysis for the steering system attached to a body-in-white is fulfilled and the modal parameters extracted from the experimental data are used to predict the effect of structural modification, The design sensitivity results rank the locations to be reinforced in terms of frequency variation. The modification of steering system according to the sensitivity analysis results shifted the resonant frequency of the system effectively. In addition, the idle test of the car after the structural modifications f steering system shows that the proposed method can reduce vibration of the steering wheel efficiently.

• Earthquakes and Structures
• /
• v.1 no.2
• /
• pp.215-230
• /
• 2010

The main objectives of this work were to investigate the effects of the nonlinear behavior of the isolation pads on the seismic response of bridges with rubber bearings, and to identify when base isolation improved their seismic performance. To achieve these objectives a parametric study was conducted designing a set of bridges for three different soil types and varying the number of spans, span lengths, and pier heights. The seismic responses (accelerations, displacements and pier seismic forces) were evaluated for three different structural models subjected to three earthquakes with different dynamic characteristics. The first represented bridges without base isolation; the second corresponded to the same bridges including now rubber bearings as an isolation system, with linear elastic behavior that shifted the natural period of the bridge by a factor of 2 to 4. In the third model the seismic response of bridges supported on lead-Rubber bearings was studied accounting for the nonlinear behavior of the lead. The results show clearly the importance of the nonlinear behavior on the seismic performance of the bridges.

• Journal of ILASS-Korea
• /
• v.24 no.3
• /
• pp.122-129
• /
• 2019

Flow uniformity in aftertreatment system is an important factor in determining uniform catalytic reaction and filtration. In this study, variety types of DOC-DPF system design were analyzed to increase flow uniformity. For this analysis, ANSYS Fluent was used with porous media setup for DOC and DPF. Turbulent flow was modeled by standard $k-{\varepsilon}$ model excepting porous media. Uniformity index was utilized to evaluate the flow uniformity quantitatively. Reference design showed low velocity region because two large vortex were generated before baffle. When radius of DOC-DPF system was increased, exhaust pressure acting on the inlet decreases and velocity distribution was shifted to one side. When inlet pipe was set to axial center of DOC-DPF system velocity distribution was symmetric. However, flow was not dissipated until the front end of DOC and showed higher uniformity index. When the volume of DOC was reduced while fixed volume of entire DOC-DPF system and baffle plate is located downstream of the DOC-DPF system, there was improvement in uniformity index.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.225-226
• /
• 2018

전기자동차 배터리팩을 충전하기 위한 장치인 차량용 OBC(On-Board Charger)는 AC/DC 컨버터 기능을 담당하는 PFC(Power Factor Correction)와 DC/DC 전력변환 및 전기적 절연을 담당하는 Phase-Shifted Full Bridge Converter를 포함 한다. 현재 시중에 3.3kW급 OBC를 기준으로 규격화되어 생산되고 있지만 전기자동차의 배터리 용량이 날로 증가하고 전기자동차 보급, 사용률이 증가함에 따라 완속충전에 대한 요구가 높아지고 있다. 여기에 전력 인프라 시설 개선과 더불어 6.6kW급 완속충전이 보편화될 수 있게 된다. 차량용 OBC 공급업체에 있어서는 기존의 3.3kW급과 6.6kW급 OBC의 개발 중 어느 쪽에 중심을 둘지 고민에 대한 대안으로 기존의 3.3kW급을 모듈화하여 병렬운전하는 방법으로 6.6kW급 OBC 시장수요에 대응 할 수 있다. 본 논문에서는 3.3kW급 OBC 및 2병렬운전에 관한 시뮬레이션을 개발하고 분석하였다.

• Molecules and Cells
• /
• v.44 no.12
• /
• pp.883-892
• /
• 2021

Genome-wide chromosome conformation capture (3C)-based high-throughput sequencing (Hi-C) has enabled identification of genome-wide chromatin loops. Because the Hi-C map with restriction fragment resolution is intrinsically associated with sparsity and stochastic noise, Hi-C data are usually binned at particular intervals; however, the binning method has limited reliability, especially at high resolution. Here, we describe a new method called HiCORE, which provides simple pipelines and algorithms to overcome the limitations of single-layered binning and predict core chromatin regions with three-dimensional physical interactions. In this approach, multiple layers of binning with slightly shifted genome coverage are generated, and interacting bins at each layer are integrated to infer narrower regions of chromatin interactions. HiCORE predicts chromatin looping regions with higher resolution, both in human and Arabidopsis genomes, and contributes to the identification of the precise positions of potential genomic elements in an unbiased manner.

• Electronics and Telecommunications Trends
• /
• v.38 no.4
• /
• pp.70-80
• /
• 2023

In recent years, our society has shifted from an information society to an intelligent information society, in which computing has become a key factor in shaping and driving social development. In this new era of digital civilization powered by the Internet of Things, traditional data-based computing is no longer sufficient to meet the growing demand for higher levels of intelligence. Therefore, intelligent computing has emerged, reshaping traditional computing and forming new computing paradigms to promote the digital revolution in the era of the Internet of Things, big data, and artificial intelligence. Intelligent computing has greatly expanded the scope of computing through new computing theories, architectures, methodologies, systems, and applications, and it is expanding into diverse computing paradigms such as perceptual intelligence, cognitive intelligence, autonomous intelligence, and human-computer fusion intelligence. This paper introduces the concept and main features of intelligent computing and describes trends in standardization for intelligent computing within the ISO/IEC JTC 1, focusing on the technical trend report on intelligent computing that is currently under development within ISO/ IEC JTC 1/AG 2.