• 제목/요약/키워드: shift-addition

검색결과 829건 처리시간 0.024초

레이더 펄스 압축 신호의 최적 탐색 알고리즘 개발 및 최적 코드에 관한 연구 (Optimal Radar Pulse Compression Processing Algorithm and the Resulting Optimal Codes for Pulse Compressed Signals)

  • 김효준;이명수;김영기;송문호
    • 한국통신학회논문지
    • /
    • 제25권6B호
    • /
    • pp.1100-1105
    • /
    • 2000
  • 현대의 레이더 펄스 압축기술로 가장 널리 사용되고 있는 방식은 바커코드를 사용하여 matched filter로 레이더 신호를 처리하는 상관처리(correlation processing)이다. 그러나 이 방식의 경우 탐지 감도를 높여 주는 장점이 있지만, 환경에 따라서 range-sidelobe가 발생하여 레이더의 성능을 낮추게 된다. 본 논문에서는 상관처리방식에 추가적인 처리로 sidelobe를 제거하는 최적처리 방법을 제안하고 Doppler shift가 존재할 때의 성능을 평가한다. 그리고 제안된 알고리즘 환경에서 최적의 이진 코드를 개발하고 이를 Barker 코드를 사용한 전통적인 상관처리방식의 경우와 비교.분석한다. 도플러 변이가 존재할 때, 최적 코드를 사용하여 최적 처리하는 방식이 바커코드를 사용한 전통적인 처리방법보다 레이더의 성능을 향상시킴을 보여줄 것이다.

  • PDF

A Study on Implementing a Phase-Shift Full-Bridge Converter Employing an Asynchronous Active Clamp Circuit

  • Lee, Yong-Chul;Kim, Hong-Kwon;Kim, Jin-Ho;Hong, Sung-Soo
    • Journal of Power Electronics
    • /
    • 제14권3호
    • /
    • pp.413-420
    • /
    • 2014
  • The conventional Phase-Shift Full-Bridge (PSFB) converter has a serious voltage spike because of the ringing between the leakage inductance of the transformer and the parasitic output capacitance of the secondary side rectifier switches. To overcome this problem, an asynchronous active clamp technique employing an auxiliary DC/DC converter has been proposed. However, an exact analyses for designing the auxiliary DC/DC converter has not been presented. Therefore, the amount of power that is supposed to be handled in the auxiliary DC/DC converter is calculated through a precise mode analyses in this paper. In addition, this paper proposes a lossy snubber circuit with hysteresis characteristics to reduce the burden that the auxiliary DC/DC converter should take during the starting interval. This technique results in optimizing the size of the magnetic component of the auxiliary DC/DC converter. The operational principles and the theoretical analyses are validated through experiments with a 48V-to-30V/15A prototype.

3중 밀도 이산 웨이브렛 변환을 이용한 디지털 영상처리 기법 (The Digital Image Processing Method Using Triple-Density Discrete Wavelet Transformation)

  • 신종홍
    • 디지털산업정보학회논문지
    • /
    • 제8권3호
    • /
    • pp.133-145
    • /
    • 2012
  • This paper describes the high density discrete wavelet transformation which is one that expands an N point signal to M transform coefficients with M > N. The double-density discrete wavelet transform is one of the high density discrete wavelet transformation. This transformation employs one scaling function and two distinct wavelets, which are designed to be offset from one another by one half. And it is nearly shift-invariant. Similarly, triple-density discrete wavelet transformation is a new set of dyadic wavelet transformation with two generators. The construction provides a higher sampling in both time and frequency. Specifically, the spectrum of the first wavelet is concentrated halfway between the spectrum of the second wavelet and the spectrum of its dilated version. In addition, the second wavelet is translated by half-integers rather than whole-integers in the frame construction. This arrangement leads to high density wavelet transformation. But this new transform is approximately shift-invariant and has intermediate scales. In two dimensions, this transform outperforms the standard and double-density discrete wavelet transformation in terms of multiple directions. Resultingly, the proposed wavelet transformation services good performance in image and video processing fields.

툴 체인지 방식 멀티 노즐 3D프린터의 설계 및 제작 (Design and Fabrication of Tool Change Multi-nozzle FDM 3D Printer)

  • 석익현;박종규
    • 한국기계가공학회지
    • /
    • 제20권2호
    • /
    • pp.38-44
    • /
    • 2021
  • To cater to the transition from single-color to multicolor/multi-material printing, this paper proposes a cartridge-replacing type multi-nozzle Fused Depositon Modeling(FDM) three-dimensional (3D) printer. In the test printing run, tool change failure/wobble/layer shift occurred. It was confirmed that improper support was the cause of this tool change failure. As a solution, spline and electromagnetic cartridges were designed. Wobble was caused by machine vibration and the motor stepping out. To minimize wobble, an additional Z-axis was installed, and the four-point bed leveling method was used instead of the three-point bed leveling method. The occurrence of layer shift was ascribed to the eccentricity of the Z-axis lead screw. Therefore, slit coupler was replaced with an Oldham type. In addition to the mechanical supplementation, the control environment was integrated to prevent accidents and signal errors due to wire connections. Before the final test printing run, a rectifier circuit was added to the motor to secure precise control stability. The final test printing run confirmed that the wobble/layer shift phenomenon was minimized, and the maximum error between layers was reduced to 0.05.

재생에너지 정책수단 전환의 효과성 연구: 한국의 전환 사례 분석 (A Study on effectiveness of transition of policy instruments for renewable energy: In the case of shift from FIT to RPS in Korea)

  • 박인용;정재용
    • 기술혁신연구
    • /
    • 제28권2호
    • /
    • pp.1-36
    • /
    • 2020
  • 재생에너지 육성을 위한 각국의 정책적 개입이 강화되는 가운데 우리나라도 2002년 발전차액지원제도(FIT)를 도입하여 재생에너지에 육성을 직접적으로 지원하였으나 2012년 의무할당제(RPS)를 도입하여 발전차액지원제도를 대체하는 정책수단의 전환이 발생하였다. 이는 현재 우리나라에서만 발견되는 독특한 배경으로, 발전차액지원제도와 의무할당제의 비교를 다룬 기존 논의에서 나아가 정책수단 전환의 성과에 초점을 맞춘 새로운 답이 요구된다. 이에 본 연구에서는 의무할당제 전환이 이루어진 2012년 전후 정책 효율성의 변화를 자료포락분석(DEA)과 맘퀴스트 지수(Malmquist Index)를 사용하여 분석하였다. 그 결과 에너지원에 따라 의무할당제 전환 이후 정책효율성의 제고에 차이가 발생한 것을 알 수 있었다. 이는 재생에너지 사업자들이 기술력 또는 가격경쟁력이 확보된 에너지원에 대해서만 자발적으로 시장에 진입하였고, 이것이 의무할당제 전환 이후의 재생에너지 보급 성과가 특정 에너지원에 편중된 것으로 해석된다. 본 연구의 결과는 재생에너지 정책의 목표가 보급 확대와 성장동력화에 있음을 고려할 때 정책수단의 선택에 있어 기술, 시장 등을 고려한 다면적 분석이 필요하며, 이를 바탕으로 각 재생에너지원의 현황에 맞춘 다각화된 개입이 필요함을 시사한다.

주파수 선택성 페이딩 환경하에서 $\frac{\pi}{4}$ shift QPSK 변조방식에 대한 다중파의 시간지역 검출법 제안 (A Multipath Delay Time Detection Method For $\frac{\pi}{4}$ Shift QPSK Modulation Under The Frequency Selective Fading Environment)

  • 조병진;김대영
    • 한국통신학회논문지
    • /
    • 제16권10호
    • /
    • pp.941-950
    • /
    • 1991
  • 디지털 이동통신 전송로에 있어서 고속통신을 위한 시스템의 성능은 다중파 지연분산에 의해 크게 좌우된다. 본 논문에서는 최근 디지털 자동차 전화의 변복조방식으로 채택된 $\pi/4$ shift QPSK에 대해, 간이 다중파 지연시간 검출방법으로써 직교채널간섭량 (CCI)을 이용하는 방법을 제안하였다. $\pi/4$ shift QPSK신호는 원래 직교 채널에 정보를 갖고있기 때문에 BPSK변조방식처럼 Quadrature채널에서 간섭량을 얻기 위하여 주파수 체배기와 지연전파 방식을 제안하였다. 또한 다중파 전파환경하에서, 격렬하게 변하는 직교채널 간섭량으로 부터 정보를 얻는 방법으로서 절대치평균과 실효치 평균을 취하는 방법을 제안하였으며, 아울러 자연분산과 직교채널 간섭량과의 관계도 조사하였다. 이론적인 결과를 확인하기 위하여, 준정적인 2파 모델과 Rayleigh분포 2파모델하에서 computer simulation을 수행하였다. simulation결과 좋은 결과가 얻어졌으나. 본방식은 송신 대역제한에 어느정도 민감하다는 것이 밝혀졌다. 또한 H/W실현시 주요부분인 주파수 체배기에 대한 H/W구성 방안도 제안하였다.

  • PDF

의사소통 교육 체험에 대한 질적 연구 -간호사의 인수인계 대화를 중심으로 (A qualitative study of the experiences of nurse participants in a communication education program for nursing change-of-shift dialogue)

  • 박성철;박용익;석소현;이혜용;정연옥;진정근;이정우
    • 의료커뮤니케이션
    • /
    • 제12권1호
    • /
    • pp.97-110
    • /
    • 2017
  • Purpose: This study is an overview of the experiences of nurses who have participated in a communication education program which was designed to develop proper change-of-shift dialogues. The goal of this program was to improve the communication competencies of outgoing and incoming nurses during handover and takeover of their shifts. Methods: The materials used in this study to analyze the experiences qualitatively were transcripts from narrative interviews with seven nurse participants. The education program consisted of two rounds of change-of-shift simulations by pairs of nurses, planning of a forthcoming change-of-shift, three lectures on ideal dialogue patterns, and time for video feedback. Afterwards the participants' experiences of the program were evaluated generally, highlighting the positive and the negative aspects, and how this educational experiences might affect their future change-of-shift activities. Results: High practicability, originality, professionalism, and effectiveness were some of the positive assessments made by the nurse participants. In addition, they pointed out that the sample video in which two professors performed an ideal handover and takeover and the paper kardex were both quite unrealistic. The location of the change-of-shift simulation was also unfamiliar so it needed to be supplemented. However, most of the nurses took for granted that such a communication education program is necessary and that it will provide a substantial help in their future job performance. In this regard they recommended the program to all related hospitals and nursing schools. Conclusion: The results of this study could be applied to other forms of communication education programs regardless of the specific area where communication takes place.

Extracting Multiword Sentiment Expressions by Using a Domain-Specific Corpus and a Seed Lexicon

  • Lee, Kong-Joo;Kim, Jee-Eun;Yun, Bo-Hyun
    • ETRI Journal
    • /
    • 제35권5호
    • /
    • pp.838-848
    • /
    • 2013
  • This paper presents a novel approach to automatically generate Korean multiword sentiment expressions by using a seed sentiment lexicon and a large-scale domain-specific corpus. A multiword sentiment expression consists of a seed sentiment word and its contextual words occurring adjacent to the seed word. The multiword sentiment expressions that are the focus of our study have a different polarity from that of the seed sentiment word. The automatically extracted multiword sentiment expressions show that 1) the contextual words should be defined as a part of a multiword sentiment expression in addition to their corresponding seed sentiment word, 2) the identified multiword sentiment expressions contain various indicators for polarity shift that have rarely been recognized before, and 3) the newly recognized shifters contribute to assigning a more accurate polarity value. The empirical result shows that the proposed approach achieves improved performance of the sentiment analysis system that uses an automatically generated lexicon.

호장근 추출액에 의한 염색성(Ⅱ) - 호장근 추출액의 자외 · 가시부 분광 특성 - (The Dyeing Properties of Korean Knotweed Extract(Ⅱ) - The UV-visible Spectrophotometric Characteristics of Korean Knotweed Extracts -)

  • 김미숙;최석철
    • 한국염색가공학회지
    • /
    • 제13권5호
    • /
    • pp.10-10
    • /
    • 2001
  • The Purpose of this study was to investigate spectrophotometric characteristics of Korean knotweed extracts. The properties were evaluated by it′s extracting solvent, effect of metallic ion, variations of pH values and effect of light exposure. The results were as following; The highest absorbance was found in methanol extract of Korean knotweed, while the lowest absorbance was carbon tetrachloride extract. The UV-vis. spectra of Korean knotweed colors in several solvents showed hypsochromic shift of n-π/sup */ transition with the polarity of solvent. Absorbance and peak of UV-vis. spectra of Korean knotweed colors became lower and broader by addition of metallic ion. The light stability in irradiation with xenon ]amp of the color solution with Cu were higher than those of Al and Fe. The UV-vis. spectra of Korean knotweed extracts in various pH values showed bathochromic shift under alkaline condition, and their peaks disappeared after 5 hours exposure.

호장근 추출액에 의한 염색성(II) -호장근 추출액의 자외 . 가시부 분광 특성 - (The Dyeing Properties of Korean Knotweed Extract( II ) - The UV-visible Spectrophotometric Characteristics of Korean Knotweed Extracts -)

  • 김미숙;최석철
    • 한국염색가공학회지
    • /
    • 제13권5호
    • /
    • pp.298-305
    • /
    • 2001
  • The Purpose of this study was to investigate spectrophotometric characteristics of Korean knotweed extracts. The properties were evaluated by it's extracting solvent, effect of metallic ion, variations of pH values and effect of light exposure. The results were as following; The highest absorbance was found in methanol extract of Korean knotweed, while the lowest absorbance was carbon tetrachloride extract. The UV-vis. spectra of Korean knotweed colors in several solvents showed hypsochromic shift of $n->\pi^*$ transition with the polarity of solvent. Absorbance and peak of UV-vis. spectra of Korean knotweed colors became lower and broader by addition of metallic ion. The light stability in irradiation with xenon ]amp of the color solution with Cu were higher than those of Al and Fe. The UV-vis. spectra of Korean knotweed extracts in various pH values showed bathochromic shift under alkaline condition, and their Peaks disappeared after 5 hours exposure.

  • PDF