• 한국인터넷방송통신학회논문지
• /
• 제9권4호
• /
• pp.59-68
• /
• 2009

본 논문은 최근 소개된 curvelet 변환 구성을 사용하여 하잇브리드 다초점 이미지 융합 기법을 다룬다. 하잇브리화는 MS 융합 규칙을 새로운 "복제" 방법과 결합시킴으로써 얻어진다. 제안된 기법은 MS 규칙을 사용하여 각 분해 레벨 이미지의 스펙트럼내에 m개의 가장 두드러진 항들만을 융합시킨다. 이 기법은 이미지의 어떠한 스케일과 방향, 이동에서 변환 집합의 MSC에 충실하여 m-항 융합으로 합성이 이루어진다. 제안한 방법을 평가하기 위하여 Xydeas 와 Petrovic이 제안한 경계선에 민감한 객관적 품질 척도를 적용하였다. 실험 결과는 제안한 기법이 잉여, 쉬프트-불변 Dual-Tree 복소수 웨이블릿 변환에 대한 대안으로서의 가능성을 보여주었다. 특히, 50%의 m-항 융합은 어떤 시각적인 품질 저하를 갖지 않는 결과를 주는 것이 확인되었다.

• 한국직업건강간호학회지
• /
• 제23권3호
• /
• pp.123-133
• /
• 2014

Purpose: The purpose of this study was to investigate the relationships among self-efficacy, collective efficacy, job satisfaction, and organizational commitment of nurses working in general hospitals. Methods: Data were collected from 239 nurses working in five general hospitals of a local area by self-reported questionnaires. The collected data were analyzed with descriptive statistics, t-test, ANOVA, Pearson's correlation, and hierarchial multiple regression. Results: Self-efficacy, collective efficacy, job satisfaction, and organizational commitment showed significantly positive correlations. Hierarchial multiple regression analysis showed that self-efficacy was the main factor of affecting job satisfaction, which explained 14.3% of the variance for the nurses' job satisfaction together with collective efficacy and weekly working time. In addition, the primary factor of affecting organization commitment was self-efficacy, which accounted for 17.2% of the variance for the nurses' organizational commitment together with hospital size and shift work. Conclusion: Self-efficacy and nursing working condition such as working time or hospital size contributed to the job satisfaction and organizational commitment and collective efficacy contributed to the job satisfaction. Therefore, the strategies for improving self and collective efficacy should be considered. Further study is also needed to investigate the concept of collective efficacy and its' measurement, and the relationship between collective efficacy and organizational commitment.

• Elastomers and Composites
• /
• 제42권1호
• /
• pp.55-58
• /
• 2007

TG/DTG 열분석법을 이용하여 EPDM/IIR 고무 블렌드의 열적 성질을 각각의 EPDM 및 IIR 샘플과 비교하여 시험하고 그 들 상호간의 상용성을 연구하였다. 실험에서 EPDM/IIR 고무 블렌드 샘플의 TGA 열분석곡선은 EPDM 및 IIR의 고유한 열분해 특성을 동시에 반영하는 모습을 나타내었다. 각각의 샘플에 대한 DTG 곡선을 구하여 본 결과, 블렌드의 DTG 곡선은 EPDM과 IIR 의 DTG peak 특성을 각각 나타내는 두 개의 peak로 분리되어 나타났으며, 특히 IIR의 특성 peak는 원래 IIR peak보다 약 $25\;^{\circ}C$ 정도 고온으로 이동하여 나타난 반면 EPDM의 특성 peak는 약 $15\;^{\circ}C$ 정도 저온으로 이동하여 나타났다. 이러한 결과로부터 EPDM이 IIR에 비해 상대적으로 열적 안정성이 더 큰 것으로 생각되었으며, 또한 EPDM과 IIR의 블렌드는 부분적으로 상용성이 있는 것으로 판단되었다. 또한 미리 결정된 EPDM/IIR 블렌드의 조성비에 따른 DTG 곡선과의 관계를 미리 준비해 두게 되면, 본 실험에서와 같이 비교적 간단한 TGA 실험을 통하여 미지의 EPDM/IIR 블렌드에 대한 조성비도 다른 고무 블렌드에서와 마찬가지로 정량적인 정보를 얻어 낼 수 있었다.

• Journal of Preventive Medicine and Public Health
• /
• 제27권3호
• /
• pp.487-504
• /
• 1994

A cross-sectional study was performed to evaluate the effects of chronic low-dose solvent on neurobehavioral performance of 118 male car painters. A control group of 113 workers matched for age was selected from different sections of the factory. The mean age and the mean duration of employment were 33 years and 6.7 years in both groups. Mean years of education were 11.4 years in car painters and 11.8 years in controls. Each worker completed a medical and occupational questionnaire and four tests of Swedish performance evaluation system. These included simple reaction time, symbol digit, digit span and finger tapping speed. Althougth the mean duration of employment was 6.7 years, comparison of mean performance showed a significantly poorer performance on simple reaction time (p<0.05), symbol digit(p<0.01) and digit span(p<0.05) in car painters. In univariate analysis, age and educational level contributed to poorer performance on symbol digit and digit span. Smoking appeared to slow finger tapping speed in car painters. Performance of four tests of car painters exposed to high level of solvent was poorer than that of car painters exposed to low level. In multiple regression models, controlling for age, alcohol, smoking and shift work, solvent exposure was found to be associated with performance of simple reaction time, symbol digit and digit span and exposure to high level of solvent was related to poorer performance of symbol digit and digit span.

• 센서학회지
• /
• 제6권4호
• /
• pp.252-257
• /
• 1997

ITO(indium-tin-oxide)/PPV(poly(p-phenylenevihylene))/음극 전극의 단층구조와 ITO /PVK(poly(N-vinylcarbazole))/PPV/음극전극의 이층구조를 가진 유기 EL(electroluminescence) 소자를 제작하였으며, 전기-광학적 특성을 측정하였다. 실험 결과, 단층구조에서는 PPV막의 열변환 온도를 $140^{\circ}C$에서 $260^{\circ}C$로 증가할수록 최대 휘도가 $118.8\;cd/m^{2}$(20V)에서 $21.14\;cd/m^{2}$(28V)으로 감소하였고, EL 스펙트럼의 최대 피크가 500nm에서 580nm로 이동하였다. 또한, 음극전극의 일함수가 낮을수록 소자의 발광휘도와 주입 전류는 증가되었다. 이층구조에서는 PVK막의 농도가 감소함에 따라 발광휘도가 $70.71\;cd/m^{2}$(32V)에서 $152.7\;cd/m^{2}$(26V)으로 증가하였다.

• Environmental Engineering Research
• /
• 제17권4호
• /
• pp.179-184
• /
• 2012

The light absorbance of photocatalysts and reaction kinetics of environmental pollutants at the liquid-solid and gas-solid interfaces differ from each other. Nevertheless, many previous photocatalytic studies have applied the science to aqueopus applications without due consideration of the environment. As such, this work reports the surface and morphological characteristics and photocatalytic activities of carbon-embedded (C-$TiO_2$) photocatalysts for control of gas-phase methyl tertiary-butyl ether (MTBE) under a range of different operational conditions. The C-$TiO_2$ photocatalysts were prepared by oxidizing titanium carbide powders at $350^{\circ}C$. The characteristics of the C-$TiO_2$ photocatalysts, along with pure TiC and the reference pure $TiO_2$, were then determined by X-ray diffraction, scanning emission microscope, diffuse reflectance ultraviolet-visible-near infrared (UV-VIS-NIR), and Fourier transform infrared spectroscopy. The C-$TiO_2$ powders showed a clear shift in the absorbance spectrum towards the visible region, which indicated that the C-$TiO_2$ photocatalyst could be activated effectively by visible-light irradiation. The MTBE decomposition efficiency depended on operational parameters, including the air flow rate (AFR), input concentration (IC), and relative humidity (RH). As the AFRs decreased from 1.5 to 0.1 L/min, the average efficiencies for MTBE increased from 11% to 77%. The average decomposition efficiencies for the ICs of 0.1, 0.5, 1.0, and 2.0 ppm were 77%, 77%, 54%, and 38%, respectively. In addition, the decomposition efficiencies for RHs of 20%, 45%, 70%, and 95% were 92%, 76%, 50%, and 32%, respectively. These findings indicate that the prepared photocatalysts could be effectively applied to control airborne MTBE if their operational conditions were optimized.

• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2671-2676
• /
• 2015

오늘날, 모바일 장치는 현재 응용 프로그램의 넓은 범위를 지원 할 수 있습니다. 불행히도, 일부 응용 프로그램은 늘어나는 계산 능력을 필요로 하고 모바일 장치는 이러한 낮은 처리 능력, 제한된 메모리, 예측할 수없는 연결 및 제한된 배터리 수명으로 제약에 자원이 한정되어 있습니다. 모바일 장치의 한계를 극복하기 위해 연구자들은 강력한 컴퓨팅 인프라 모바일 장치에서의 작업 부하를 이동하기 위해 가상화 기술을 사용하여 모바일 장치에 클라우드 컴퓨팅 서비스를 확장하는 상상합니다. 이러한 기술은 인프라 자원이 풍부한 클라우드 또는 서버에 모바일 장치에서 자원을 많이 소비하는 계산의 이행으로 구성되어 있습니다. 본 논문에서 클라우드 아키텍처 기능에 클라우드과 모바일 장치 사이의 거리의 영향을 분석합니다.

• 한국산학기술학회논문지
• /
• 제10권8호
• /
• pp.2164-2172
• /
• 2009

본 연구는 종합병원 간호사들을 대상으로 특수부서 근무 간호사(수술실, 중환자실, 응급실)와 병동 근무 간호사의 피로수준을 비교하고 그의 관련요인을 파악하기 위해 2008년 8월에 대전광역시에 소재하고 있는 400병상 이상의 3개 종합병원에 근무하는 여성 간호사 393명을 대상으로 자기기입식설문조사를 실시하였다. 연구결과 평균 피로점수는 특수부서 근무 간호사가 병동 근무 간호사보다 높았다. 다중회귀분석결과 피로수준에 영향을 미치는 관련 요인으로는 특수부서 근무 간호사의 경우 주관적 건강 상태, 연령, 간호직 생활에 대한 만족도가 주요 설명변수로 선정되었으며, 병동 근무자의 경우는 주관적 건강 상태, 평소 수면 시간, 교대 근무, 간호직 생활에 대한 만족도가 주요설명변수로 선정되었다. 위와 같은 결과를 볼 때, 특수부서 근무 간호사는 병동근무간호사에 비해 피로수준이 높은 것을 알 수 있으며, 특수부서 근무간호사와 병동 근무간호사의 피로에 영향을 미치는 관련 요인에도 차이가 있음을 알 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.124-124
• /
• 2010

Much interest has been focused on InGaN-based materials and their quantum structures due to their optoelectronics applications such as light emitting diode (LED) and photovoltaic devices, because of its high thermal conductivity, high optical efficiency, and direct wide band gap, in spite of their high density of threading dislocations. Build-in internal field-induced quantum-confined Stark effect in InGaN/GaN quantum well LED structures results in a spatial separation of electrons and holes, which leads to a reduction of radiative recombination rate. Therefore, many growth techniques have been developed by utilizing lateral over-growth mode or by inserting additional layers such as patterned layer and superlattices for reducing threading dislocations and internal fields. In this work, we investigated various characteristics of InGaN multiple quantum wells (MQWs) LED structures grown on selectively wet-etched porous (SWEP) GaN template layer and compared with those grown on non-porous GaN template layer over c-plane sapphire substrates. From the surface morphology measured by atomic force microscope, high resolution X-ray diffraction analysis, low temperature photoluminescence (PL) and PL excitation measurements, good structural and optical properties were observed on both LED structures. However, InGaN MQWs LED structures grown on SWEP GaN template layer show relatively low In composition, thin well width, and blue shift of PL spectra on MQW emission. These results were explained by rough surface of template layer, reduction of residual compressive stress, and less piezoelectric field on MQWs by utilizing SWEP GaN template layer. Better electrical properties were also observed for InGaN MQWs on SWEP GaN template layer, specially at reverse operating condition for I-V measurements.

• 한국산업보건학회지
• /
• 제27권1호
• /
• pp.23-37
• /
• 2017

Objectives : This study was conducted to evaluate the level of exposure to volatile organic compounds (VOCs) among workers handling rust preventive oils. Methods : A total of 30 bulk samples and 54 personal air samples were collected using diffusive samplers at 22 workplaces handling rust preventive oils in Daegu and Gyongsangbuk-do Province from March to October 2013. We also investigated detailed information on the related work conditions, such as kinds of products, handling methods, local exhaustive ventilation systems, and the status of the wearing personal protective equipment. All bulk samples and air samples were analyzed using gas chromatography mass spectrometry (GC-MS) to identify components to which workers potentially were exposed. Quantitative airborne concentrations of VOCs were confirmed using gas chromatography with flame ionized detectors. Results : In terms of qualitative analyses for the 30 bulk samples, we found carcinogenic, mutagenic and reproductive toxic(CMR) substances such as butane(carcinogenic Group 1A, mutagenic Group 1B), butoxy ethanol(carcinogenic Group 2), cumene (carcinogenic Group 2), ethyl benzene(carcinogenic Group 2), methyl isobutyl ketone(carcinogenic Group 2) and toluene (reproductive toxic, Group 2). As a result of full-shift based personal air samples, eight substances such as n-hexane, n-heptane, octane, nonane, decane, toluene, ethyl benzene and xylene were detected. Among them, n-hexane and n-heptane were detected in all of 54 air samples with $13.13mg/m^3$ and $8.61mg/m^3$ of maximum concentration, respectively. The level of airborne concentration from all of samples were bellow the occupational exposure limit in Korea. Conclusions : Based on the results of this study, workers handling rust preventive oils could be exposed to CMR substances contained in rust preventive oils and n-hexane and n-heptane were found as the most frequent sources of VOC exposure.