• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.405-418
• /
• 2020

Deep excavation may have impact on the adjacent tunnels. It is obvious that the excavation will adversely affect and even damage the existing tunnels if the induced deformation exceeds the capacity of tunnel structures. It hence creates a high necessity to predict tunnel displacement induced by nearby excavation to ensure the safety of tunnel. In this paper, a simplified method to evaluate the heave of the underlying tunnel induced by adjacent excavation is presented and verified by field measurement results. In the proposed model, the tunnel is represented by a series of short beams connected by tensile springs, compressional springs and shear springs, so that the rotational effect and shearing effect of the joints between lining rings can be captured. The proposed method is compared with the previous modelling methods (e.g., Euler-Bernoulli beam, a series of short beams connected only by shear springs) based on a field measured longitudinal deformation of subway tunnels. Results of these case studies show a reasonable agreement between the predictions and observations.

• 한국기계가공학회지
• /
• 제6권2호
• /
• pp.17-21
• /
• 2007

Shearing including punching, blanking, trimming, slitting, etc is one of the most frequently used processes in sheet metal manufacturing. It has been widely used for manufacturing autobody, electronic components, aircraftbody, etc. In this paper, it has been researched by the experiment to examine the effect of burr height corresponding to die clearance, cutting angle, tool sharpness, etc. This paper presents the experimental results with using Al alloy sheet.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.96-98
• /
• 2003

The evolution of texture and microstructure during continuous confined strip shearing (CCSS) in aluminum 3003 alloy sheets was investigated. The tools of CCSS based on the equal channel angular pressing (ECAP) were designed to provide a constant shear deformation of the order of 0.5 per pass while preserving the original sheet shape. FEM results indicated that the shear formation is not homogeneous throughout the sample thickness, in particular at the surface layers. A randomization of textures took place during the CCSS deformation. Observations by TEM and EBSD revealed the formation of sub-micrometer sized grains after CCSS.

• 기술사
• /
• 제18권3호
• /
• pp.21-27
• /
• 1985

Earthen mass located beneth a sloping group surface, whether natural or manmade, have a tendency to move downward and outward under the influence of gravity. Unless this tendency is suitably counteracted by the Shearing resistances within the mass, a landslide occurs. Avoiding such instabilities is a major concern of the geotechnical engineer. The shearing behavior of a soil is determined empirically, i.e., by field tests or laboratory tests. This results are applied to the slope stability analysis. The factor of safety for slope stability analysis is much more sensitive to the choice of strength parameters as interpreted from soil tests than to the choice of the computational method of analysis. This paper was investigated the influence of the change in the factor of safety due to a change in one of the parameters, relative to the total change in the factor of safety due to change in all parameters. A conclusion may be reached with respect to the required precision definition of the different variables to limit uncertainties in the factor of safety to tolerable levels.

• Structural Engineering and Mechanics
• /
• 제5권4호
• /
• pp.369-383
• /
• 1997

The classical theory of thin-walled members is unable to reflect the shear lag phenomenon since it is based on the assumption of no shearing strains in the middle surface of the walls. In this paper, an energy equation for the lateral buckling of thin-walled members has been derived which includes the effects of torsion, warping and, especially, the shearing strains which reflect the shear lag phenomenon. A numerical analysis for the lateral buckling of thin-walled members with openings by using Galerkin's method of weighted residuals has been presented. The proposed numerical values and the predictions by experiment for the lateral buckling loads are to agree closely in the paper. The results from these comparisons show that the proposed method here is capable of predicting the lateral buckling of thin-walled members with openings. The fast convergence of the results indicates the numerical stability of the method. By the study, a very complex practical eigenvalue problem is transformed into a very simple one of solving only a linear equation with one variable.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.503-506
• /
• 2005

The purpose of this study was the Development of Retrofit Method for Beam Using Steel Plate Reinforced by Fiber Sheet.1. Additional reinforcements are not needed in the joining area of slab and beam web.2. Beam using carbon fiber reinforced plastic displays low effects in shearing effect.3. Beams reinforced steel plate by epoxy effect the capacities of strength. But the capacities of strength are rapidly reduced when adhesive surface be omitted. Thus details are needed in this case.4.Retrofit method for beam using steel plate reinforced by fiber sheet with epoxy rosin improves the capacities of strength and the initial stiffness, shows a large transformation since the maximum load likewise may be excellent to the shearing reinforcement.

• 소성∙가공
• /
• 제19권5호
• /
• pp.290-295
• /
• 2010

Shaving technology is one of the significant metal forming technologies which can make the smooth and fine sheared surface of products after shearing process. The sheared surface on the side wall of the cutting edge is very important because it functions as a basic surface for measuring the dimensions of product. Effective sheared surface after shaving can be influenced by several working variables such as shaving allowance, shaving clearance, type of material and profile of cutting edge. The influence of these variables on shaving characteristics was investigated in this study. A cut-off die to make the simplified gear-shaped products was manufactured. Three kinds of sheet metals (AL5052, SPCC and SAPH440) of 3mm thickness were firstly sheared and then shaved for four shaving allowances and three sharing clearances. It was shown through experiments that the optimum working condition to give the maximum effective sheared surface in shaving was found ; Shaving allowance is 0.2mm and Shaving clearance is 0.01mm.

• Journal of Biosystems Engineering
• /
• 제29권1호
• /
• pp.29-36
• /
• 2004

The geometric characteristics of the Altari radish were measured for the purpose of mechanization of the kimchi processing. In this study, geometric characteristics such as the sectional area and volume of the radishes(pyeong-gang and sa-chul) were calculated using the image processing method, and physical properties such as the compressive strength, the cutting force of the radish and the torsional moment of the radish leaf-stems were measured by using a universal testing machine. In case of the radish(pyeong-gang), the weight was ranged 215.0∼465.0 g, the length of the radishes(body) was 86.3∼129.2 mm, the diameters were 43.3∼58.1 mm, and the length of the leaves was 261.3-368.2 mm. And the vertical compressive strengths were ranged 83.8∼171.7 N/$\textrm{cm}^2$, the horizontal compressive strengths were 113.0∼176.3 N/$\textrm{cm}^2$, the shearing forces were 86.0∼114.6 N, and the surface hardness was ranged 51.1∼52.1 N/$\textrm{cm}^2$. In case of the radish(sa-chul), the weight was ranged 203.5∼412.2 g, the length of the bodies was 67.5∼127.0 mm, the diameters were 22.3∼59.8 mm and the length of the leaves was 245.6∼312.6 mm respectively. And the vertical compressive strengths were ranged 91.3∼168.3 N/mm, the horizontal compressive strengths were 132.6∼186.9 N/$\textrm{cm}^2$, the shearing forces were 89.4∼116.5 N, and the surface hardness was ranged 52.4∼67.8 N/$\textrm{cm}^2$, respectively.

• 한국지반공학회논문집
• /
• 제36권12호
• /
• pp.117-124
• /
• 2020

본 연구는 온도에 따른 점성토의 전단 변형의 특성의 모사에 초점을 맞춘다. 일반적으로 온도가 상승할수록 정규압밀선은 간극비와 평균유효응력의 평면에서 하향 이동한다. 하지만 한계상태선은 온도변화에 따라 정규압밀선만큼 이동하지는 않는다. 따라서, 온도가 증가할수록, 한계상태 평균유효응력과 선행압밀 평균유효응력의 차이는 감소한다. 이를 반영하기 위해, 본 연구에서는 한계상태 평균유효응력을 기준으로 두 부분으로 나뉘어진 경계면을 적용하였다. 또한 Bangkok 점성토에 대해서 경계면을 구축하고, 비배수 삼축압축시험에 대해서 요소해석을 실시하였다. 요소해석 결과, 제안된 모델은 복잡한 강성 혹은 발달 법칙 없이 실험 데이터와 유사한 점성토의 온도에 따른 역학적 거동을 잘 모사하였다.

• 한국지반공학회지:지반
• /
• 제12권2호
• /
• pp.95-106
• /
• 1996

본 연구에서는 이방성 항복경계면 이론을 토대로 하여 자연상태의 점성토가 갖는 이방적 특성과 소성적 거동을 고려한 구성모델을 개발하였다. 이 모델은 개선된 이방항복경계면 함수와 새로운 소성포텐셜 함수를 이용한 비관련 유동법칙, 이방경화법칙과 항복면 내의 소성 거동 예측을 위한 새로운 투영법칙 등의 개념을 통하여 개발하였다. 개발된 모델의 검증을 위하여 불교란 점성토에 대한 Ko 압밀과 삼축전단 시험결과들을 비교분석한 결과 본 모델은 점성토의 거동을 잘 예측하는 것으로 나타났다.