• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1998년도 봄 학술발표회 논문집
• /
• pp.257-264
• /
• 1998

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2010년도 학술대회 초록집
• /
• pp.113-116
• /
• 2010

• 지구물리와물리탐사
• /
• 제15권1호
• /
• pp.1-7
• /
• 2012

천부 횡파속도(${\nu}_s$)를 구하기 위한 효율적 방법을 모색하기 위하여, 수동적 및 능동적 방법으로 발생된 레일리파의 분산곡선 특성을 분석하였다. 춘천지역에서 반경 5 ~ 40 m인 4개 삼각형 배열을 이용하여 5분간 감지한 상시미동을 확장된 공간자기상관법으로 분석하였다. 동일한 지역에서 해머로 발생시키고 4.5 Hz 지오폰 24개로 2초간 기록한 인공적 레일리파는 다중채널 표면파 분석법으로 처리하였다. 7 ~ 19 Hz와 11 ~ 50 Hz 구간에서 상대적으로 높은 신호/잡음비를 보이는 상시미동과 인공적 레일리파의 분산곡선을 병합하고 역산한 결과를 시추공 주상도와 비교하였다. 토사층 및 연암층의 ${\nu}_s$는 각각 221 m/s와 846 m/s 정도로 비교적 일정하나, 사력-혼전층 및 풍화암층 구간에서는 깊이에 따라 선형으로 증가하는 양상을 보인다. 횡파속도에 의한 지반분류를 적용할 경우, 풍화암/연암의 경계는 시추주상도에 표시된 깊이보다 5 m 깊은 것으로 분석된다.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.637-646
• /
• 2023

At present, the research on wave propagation in graphene platelet reinforced composite plates focuses on the propagation behavior of bulk waves, in which the effect of boundary condition is ignored, there is no literature report on propagation behaviors of guided waves in graphene platelet reinforced metal foams (GPLRMF) plates. In fact, wave propagation is affected by boundary conditions, so it is necessary to study the propagation characteristics of guided waves. The aim of this paper is to solve this problem. The effective performance of the material was calculated using the mixing law. Equations of motion of GPLRMF plate is derived by using Hamilton's principle. Then, the eigenvalue method is used to obtain the expressions of bending wave, shear wave and longitudinal wave, and the degradation verification is carried out. Finally, the effects of graphene platelets (GPLs) volume fraction, elastic foundation, porosity coefficient, GPLs distribution types and porosity distribution types on the dispersion relations are studied. We find that these factors play an important role in the propagation characteristics and phase velocity of guided waves.

• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.771-776
• /
• 2012

A technique is presented that uses a circular waveguide for the measurement of the bulk shear(S-wave) velocities of unconsolidated, saturated media, with particular application to near surface soils. The technique requires the measurement of the attenuation characteristics of the fumdamental T(0,1) mode that propagates along an embedded pipe, from which the acoustic properties of the surrounding medium are inferred. From the dispersion curve analysis, the feasibility of using T(0,1) mode which is non-dispersive and have constant attenuation over all frequency range is discussed. The principles behind the technique are discussed and the results of an experimental laboratory validation are presented. The experimental data are best fitted for the different depths of wetted sand and the shear velocities as a function of depths are formulated using power law curves.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.411-414
• /
• 2014

Numerical modeling was conducted to estimate the amount of dislocation that may occur across a frictionless fracture during an earthquake using commercial code FLAC3D (Fast Lagrangian Analysis of Continua in 3 Dimensions). The applied motion was calculated to represent a Richter 6.0 magnitude earthquake at distances of 2 km from the fracture. The velocity-time history was generated from Svensk $K{\ddot{a}}arnbr{\ddot{a}}anslehantering$ AB report. In the report, The velocity field resulting from an earthquake on a fault located in the near-field (2 km distance) was modelled using a finite difference program, WAVE. The stress-time history was substituted for velocity-time history to perform dynamic analysis using FLAC3D. During the earthquake, the maximum dislocation and change of shear stress were about 1 cm and 2MPa, respectively. Because the fracture is frictionless in this study, all dislocations relax to zero after the earthquake motions have ceased.

• 설비공학논문집
• /
• 제30권3호
• /
• pp.123-129
• /
• 2018

In this study, CFD is used to compare and analyze the flow characteristics using reflected pressure wave during the intersection of two trains in straight tunnel. Two tunnels of different lengths; 600 m and 3,400 m were designed and numerical analysis of the flow characteristics of two tunnels carried out by setting the crossing state of the two trains at a constant velocity of 27 m/s form the center of the tunnel. The simulation model was designed using the actual tunnel and subway dimensions The train motion was achieved by using the moving mesh method. For the numerical analysis, $k-{\omega}$ standard turbulence model and an ideal gas were used to set the flow conditions of three-dimensional, compressible and unsteady state. In the analysis results, it was observed that the inside of the long tunnel without interference of the reflected pressure wave was maintained at a pressure lower than the atmospheric pressure and that the flow direction was determined by the pressure gradient and shear flow. On the other hand, the flow velocity in the short tunnel was faster and the pressure fluctuation was noted to have increased due to the reflected pressure wave, with more vortices formed. In addition, the flow velocity was noted to have changed more irregularly.

• Earthquakes and Structures
• /
• 제8권5호
• /
• pp.1241-1254
• /
• 2015

Spatially variable ground motions can be significant on the seismic response of a structure due to the incoherency of the incident wave. Incoherence of the incident wave is resulted from wave passage and wave scattering. In this study, wave passage effect on the response spectrum of a building structure built on a soft soil layer was investigated utilizing a finite element program of P3DASS (Pseudo 3-dimensional Dynamic Analysis of a Structure-soil System). P3DASS was developed for the axisymmetric problem in the cylindrical coordinate, but it is modified to apply anti-symmetric input earthquake motions. Study results were compared with the experimental results to verify the reliability of P3DASS program for the shear wave velocity of 250 m/s and the apparent shear wave velocities of 2000-3500 m/s. Studied transfer functions of input motions between surface mat foundation and free ground surface were well-agreed to the experimental ones with a small difference in all frequency ranges, showing some reductions of the transfer function in the high frequency range. Also wave passage effect on the elastic response spectrum reduced the elastic seismic response of a SDOF system somewhat in the short period range.

• 한국지진공학회논문집
• /
• 제26권6호
• /
• pp.237-246
• /
• 2022

Based on the random-vibration-theory methodology, dynamic responses of nuclear facilities subjected to obliquely incidental and incoherent earthquake ground motions are calculated. The spectral power density functions of the 6-degree-of-freedom motions of a rigid foundation due to the incoherent ground motions are obtained with the local wave scattering and wave passage effects taken into consideration. The spectral power density function for the pseudo-acceleration of equipment installed on a structural floor is derived. The spectral acceleration of the equipment or the in-structure response spectrum is then estimated using the peak factors of random vibration. The approach is applied to nuclear power plant structures installed on half-spaces, and the reduction of high-frequency earthquake responses due to obliquely incident incoherent earthquake ground motions is examined. The influences of local wave scattering and wave passage effects are investigated for three half-spaces with different shear-wave velocities. When the shear-wave velocity is sufficiently large like hard rock, the local wave scattering significantly affects the reduction of the earthquake responses. In the cases of rock or soft rock, the earthquake responses of structures are further affected by the incident angles of seismic waves or the wave passage effects.

• 한국지반공학회논문집
• /
• 제36권11호
• /
• pp.7-20
• /
• 2020

본 연구에서는 말뚝기초를 대상으로 지반조건을 고려한 동적 수평지반반력계수를 제안하기 위하여 수치해석을 수행하였다. 3차원 유한차분 프로그램을 사용하여, 다양한 지반의 전단파 속도에 따라 동적수치해석을 수행하였다. 수치해석 결과로부터 동적 p-y 곡선을 도출하여 동적 수평지반반력계수를 계산하는 데 필요한 보정계수(α)를 산정하였다. 분석결과, 본 연구에서 산정된 보정계수(α)는 기존 도로교 설계기준(2015)에 제시된 획일적인 값(α=2)이 아니라 지반의 전단파 속도와 구속압에 매우 큰 영향을 받는 것을 알 수 있었으며 이를 고려한 함수식으로 제안하였다. 제안된 α의 적용성 분석을 위해 서로 다른 해석 기법(등가정적해석방법과 동적해석방법)에서의 적용성을 비교하였다. 그 결과, 제안된 보정계수(α)를 사용하는 방법은 기존 동적 수평지반반력계수를 사용하는 방법에 비해 지반-말뚝 시스템의 수평거동 특성을 비교적 적절하게 예측함을 알 수 있었다.