• The Journal of the Korea Contents Association
• /
• v.18 no.4
• /
• pp.388-397
• /
• 2018

With the continuous expansion and updating of modern cities, the historical and cultural space of ancient city is under increasing impact from the expansion of modern cities. At present, the regeneration and protection of the ancient city has achieved remarkable results together with poor results. Based on this background, this paper has revealed the power operation behind the space production of three regenerated ancient cities with 'spatial practice', 'representation of space' and '"representation of space' as the framework to, and pointed out the influence of stake holders on space shaping and analysis on the construction of regeneration model. From the perspective of specific materials, society, power, and culture, this paper has analyzed the methods of regeneration construction of Wuzhen ancient city, and provided new methods and reference values for how to regenerate and protect ancient cities. Based on these studies and analysis of the regeneration issues in ancient cities and villages, other historical cultural areas, the paper has indicated that it is necessary to coordinate with the government to clarify the issue of property rights, as well as planners and managers, to activate the regional culture and integrate it with modern culture.

• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.404-417
• /
• 2006

The purpose of this thesis, therefore, is to examine the shaping methods and the knitting drafts of sleeve cap in the knitwears which are currently used by the manufacturers; to study the curve forms of sleeves in knitwears by analyzing synthetically the results of investigating the problems of knit wear sleeves; to present the most suitable sleeve cap for the knitwears. As the studying methods, I collected the basic data from the working-level persons of knit wear manufacturers, examined the knitting draft in the knitwears, and from that, made three kinds of comparative experimental garments and one kind of research experimental one as 10G and 16G. In doing so, I showed the sleeve cap suitable for the knitwears with plain stitch after operating sensual evaluation with Liker's 5-point rating measure. The analysis of data was handled with statistics by using SPSS Ver. 12.0; the method of statistics was executed by Frequency Analysis, Trust Analysis, one-way ANOVA, and Duncan test according to each topic of the research. As the result of the sensual evaluation of the experimental garments produced from the study, the research experimental garment looks better than the comparative experimental one in both 10G and l6G; has less extra folds around the front part of sleeve cap; looks more natural in sleeve caps of the body part and of a sleeve. From this, I am able to figure out that the research experimental garment looks better than the comparative experimental one produced by knit wear manufacturers. In addition, I can come to know that the different knitting of the front line and the back one of armhole in the knitwears has a favorable impact on improving the appearance of a sleeve.

• Journal of Korean Society for Quality Management
• /
• v.52 no.1
• /
• pp.43-56
• /
• 2024

Purpose: The injection molding process, crucial for plastic shaping, encounters difficulties in sustaining product quality when replacing injection machines. Variations in machine types and outputs between different production lines or factories increase the risk of quality deterioration. In response, the study aims to develop a system that optimally adjusts conditions during the replacement of injection machines linked to molds. Methods: Utilizing a dataset of 12 injection process variables and 52 corresponding sensor variables, a predictive model is crafted using Decision Tree, Random Forest, and XGBoost. Model evaluation is conducted using an 80% training data and a 20% test data split. The dependent variable, classified into five characteristics based on temperature and pressure, guides the prediction model. Bayesian optimization, integrated into the selected model, determines optimal values for process variables during the replacement of injection machines. The iterative convergence of sensor prediction values to the optimum range is visually confirmed, aligning them with the target range. Experimental results validate the proposed approach. Results: Post-experiment analysis indicates the superiority of the XGBoost model across all five characteristics, achieving a combined high performance of 0.81 and a Mean Absolute Error (MAE) of 0.77. The study introduces a method for optimizing initial conditions in the injection process during machine replacement, utilizing Bayesian optimization. This streamlined approach reduces both time and costs, thereby enhancing process efficiency. Conclusion: This research contributes practical insights to the optimization literature, offering valuable guidance for industries seeking streamlined and cost-effective methods for machine replacement in injection molding.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.385-396
• /
• 2007

The aims of this study were to compare the shaping effect and safety between single length technique recommended by manufacturer and crown-down technique using Mtwo rotary file and to present a modified method in use of Mtwo file. Sixty simulated root canal resin blocks were used. The canals were divided into three groups according to instrument and the manner of using methods. Each group had 20 specimens. Group MT was instrumented with single length technique of Mtwo, group MC was instrumented with crown-down technique of Mtwo and group PT was instrumented with crown-down technique of ProTaper. All of the rotary files used in this study were operated by an electric motor. The scanned canal images of before and after preparation were superimposed. These superimposed images were evaluated at apical 1 to 8 mm levels Angle changes were calculated. The preparation time, weight loss, instrument failure and binding, canal aberrations, and centering ratio were measured. Statistical analysis of the three experimental groups was performed with ANOVA and Duncan's multiple range tests for post-hoc comparison and Fisher's exact test was done for the frequency comparison. In total preparation time, group MT and group MC were less than group PT. In the aberrations, group MT had more elbows than those of group MC and group PT. The binding of group MC was least and group MT was less than group PT (P < 0.05). Under the condition of this study, crown-down technique using Mtwo rotary file is better and safer method than single length technique recommended by the manufacturer.

• Restorative Dentistry and Endodontics
• /
• v.30 no.1
• /
• pp.38-48
• /
• 2005

The purpose of this study was to compare and evaluate the shaping ability of the three different Ni-Ti file systems used by undergraduate students. Fifty undergraduate students prepared 150 simulated curved root canals in resin blocks with three Ni-Ti file systems - $ProFile^{(R)}$ (PF), Manual $ProTaper^{(R)}$ (MPT), Rotary $ProTaper^{(R)}$ (RPT). Every student prepared 3 simulated root canals with each system respectively. After root canal preparation, the Ni-Ti files were evaluated for distortion or breakage Assessments were made according to the presence of various types of canal aberrations. The pre- and post-instrumented canal images were attained and superimposed. The instrumented root canal width were measured and calculated for the net transportation (deviation) and the centering ratio. Under the condition of this study, both $ProTaper^{(R)}$ systems allowed significantly more removal of root canal wall than the $ProFile^{(R)}$ system. In the important other aspects such as the centering ratio, there was no significant differences between the systems. Novice dental students were able to prepare curved root canals with any kinds of Ni-Ti file systems with little aberration and great conservation of tooth structure. Students want to learn effective methods and at the same time simple rotary procedures. The rotary $ProTaper^{(R)}$ systems were one of the most compatible to these students from the point of view of cutting ability The $ProFile^{(R)}$ system was also compatible in safe and gentle shaping.

• Archives of design research
• /
• no.18
• /
• pp.25-34
• /
• 1996

Industrial design development methods and processes have changed in accordance with Industrial Information Age. These days, problems are created by existing methods and evaluation of design value , all problems concerned with time and finances sitaution have been made a subject of discussion. Development of design processes have been changed by the development of problem recognition and solving tools, and dpsign tpchnulugy havp hppn replaced by computer technology,Thus. software design processes linking thoughtware to hardware are used in the solution of design problems with many parts. In this study, 3D Modeling samples are presented, 3D Modeling can realise ' Ideas' to '3Dimentional Virtual Ohjects'. These effect and value are anle to decisively influence the process of design problem conference-ebealuation-solution.Proxesses of actual modeling and rendering are made as follows. By compusition of simple 20 drawings and shaping them into 30 objects, 30 solid models can be made. To prssent effectivley, we can make a sample model by varying camera views,light sourses,materials and colours etc. This sample is evaluated by various cumposition, methods and PERT(Program Evaluation and Review Technique). This cuncrete sample (tentative plan)is changed within the CAD SYSTEM by design evaluation, and then converted to flowchart of mass productive conception through refined data. So, that tentative plan can be conformed to design desire actuillly, to the utmost degree. Finally, this design process can be proposed as il new method in cuntrast with current methods. The aim of this study is to suggest effective evaluation methods of design outcome among many evaluating elements.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.36-42
• /
• 2024

Roll-to-roll processing holds an integral position within the manufacturing landscape, and its significance reverberates across numerous industries. This versatile technology platform encompasses a diverse array of process methods and accommodates a wide spectrum of material categories, making it a cornerstone of modern production. Within this expansive domain, two commonly employed coating techniques, namely the slot die and gravure coating methods, have earned their prominence for their precision and efficiency in delivering flawless coatings. Additionally, the realm of drying processes relies heavily on thermal drying, infrared (IR) drying, and ultraviolet (UV) drying methods to expedite the transformation of materials from their liquid or semi-liquid states to solid, ready-to-use products. The undeniable importance of roll-to-roll processing lies in its ability to streamline manufacturing processes, reduce costs, and enhance product quality. This article embarks on a comprehensive journey to fathom the depth of this importance by delving into the intricacies of these common roll-to-roll process methods. Through rigorous research and meticulous data collection, we aim to shed light on the pivotal role these techniques play in shaping various industries and advancing the world of manufacturing. By understanding their significance, we can harness the full potential of roll-to-roll processing and pave the way for innovation and excellence in production.

• Restorative Dentistry and Endodontics
• /
• v.38 no.1
• /
• pp.21-25
• /
• 2013

Objectives: The aim of this study was to evaluate the shaping ability of newly marketed single-file instruments, Wave One (Dentsply-Maillefer) and Reciproc (VDW GmbH), in terms of maintaining the original root canal configuration and curvature, with or without a glide-path. Materials and Methods: According to the instruments used, the blocks were divided into 4 groups (n = 10): Group 1, no glide-path / Wave One; Group 2, no glide-path / Reciproc; Group 3, #15 K-file / Wave One; Group 4, #15 K-file / Reciproc. Pre- and post-instrumented images were scanned and the canal deviation was assessed. The cyclic fatigue stress was loaded to examine the cross-sectional shape of the fractured surface. The broken fragments were evaluated under the scanning electron microscope (SEM) for topographic features of the cross-section. Statistically analysis of the data was performed using one-way analysis of variance followed by Tukey's test (${\alpha}$ = 0.05). Results: The ability of instruments to remain centered in prepared canals at 1 and 2 mm levels was significantly lower in Group 1 (p < 0.05). The centering ratio at 3, 5, and 7 mm level were not significantly different. Conclusions: The Wave One file should be used following establishment of a glide-path larger than #15.

• Applied Microscopy
• /
• v.47 no.3
• /
• pp.110-120
• /
• 2017

Non-isothermal thermogravimetry (TG) measurements on melt-quenched $Bi_xSe_{100-x}$ specimens (x=0, 2.5, 7.5 at%) were made at a heating rate ${\beta}=10^{\circ}C/min$ in the range $T=35^{\circ}C{\sim}950^{\circ}C$. The as-measured TG curves confirm that $Bi_xSe_{100-x}$ samples were thermally stable with minor loss at $T{\leq}400^{\circ}C$ and mass loss starts to decrease up to $600^{\circ}C$, beyond which trivial mass loss was observed. These TG curves were used to estimate molar (Se/Bi)-ratios of $Bi_xSe_{100-x}$ samples, which were not in accordance with initial composition. Shaping features of conversion curves ${\alpha}(T)-T$ of $Bi_xSe_{100-x}$ samples combined with a reliable flow chart were used to reduce kinetic mechanisms that would have caused their thermal mass loss to few nth-order reaction models of the form $f[{\alpha}(T)]{\propto}[1-{\alpha}(T)]^n$ (n=1/2, 2/3, and 1). The constructed ${\alpha}(T)-T$ and $(d{\alpha}(T)/dT)-T$ curves were analyzed using Coats-Redfern (CR) and Achar-Brindley-Sharp (ABS) kinetic formulas on basis of these model functions, but the linearity of attained plots were good in a limited ${\alpha}(T)-region$. The applicability of CR and ABS methods, with model function of kinetic reaction mechanism R0 (n=0), was notable as they gave best linear fits over much broader ${\alpha}(T)-range$.

• Proceedings of the KACD Conference
• /
• 2002.11a
• /
• pp.720-720
• /
• 2002

A number of investigations have shown that the presence of bacteria is prerequisite for developing pulpal and/or periradicular pathosis. Depending on the stage of pulpal pathosis, various species of bacteria can be cultured from infected root canals. Kakehashi et al. showed that exposure of pulpal tissue in germ-free rats was characterized by minimal inflammation and dentinal bridging while exposure of pulpal tissue in conventional rats with normal oral flora was characterized by pulpal necrosis, chronic inflammation, and periapical lesions. Currently used methods of cleaning and shaping, especially rotary instrumentation techniques, produce a smear layer that covers root canal walls and the openings to the dentinal tubules. The smear layer contains inorganic and organic substances that include fragments of odontoblastic processes, microorganisms, their by products and necrotic materials. Because of its potential contamination and adverse effect on the outcome of root canal therapy, it seems reasonable to suggest removal of the smear layer for disinfection of the entire root canal system. Presence of this smear layer prevents penetration of intracanal medications into the irregularities of the root canal system and the dentinal tubules and also prevents complete adaptation of obturation materials to the prepared root canal surfaces. Removal of the smear layer by an intracanal irrigant and placement of an antibacterial agent in direct contact with the content of dentinal tubules should allow disinfection of this complex system and better outcome for the root canal therapy. A new solution, which was a mixture of a tetracycline, an acid, and a detergent(MTAD), was developed in the Department of Endodontics, Dental School. Lorna Linda University, USA. It has been demonstrated that MTAD was an effective solution for the removal of the smear layer and does not significantly change the structure of the dentinal tubules when used as a final irrigant in conjunction with 1 % NaOCl as a root canal irrigant. Studies are in progress to compare the anti- microbial properties of this newly developed solution with those of sodium hypochlorite and EDTA that are currently used to irrigate the root canals and remove the smear layer from the surfaces of instrumented root canals.canals.