• Steel and Composite Structures
• /
• 제20권4호
• /
• pp.851-867
• /
• 2016

Cruciform sections are an appropriate option for columns of orthogonal moment resisting frames for equal bending strength and stiffness about two main axes and the implementation is easier for continuity plates. These columns consist of two I-shaped sections, so that one of them is cut out in middle and two generated T-shaped sections be welded into I-shaped profile. Furthermore, in steel moment frames, unbalance moment at the beam-column connection leads to shear deformation in panel zone. Most of the obtained relations for panel zone strength derived from experimental and analytical results are on I-shaped columns with almost thin flanges. In this paper, a parametric study has been carried out using Finite Element Method (FEM) with effective parameters at the panel zone behavior. These parameters consist of column flange thickness, column web thickness, and thickness of continuity plates. Additionally, a mathematical model has been suggested to determine strength of cruciform column panel zone and has been shown its accuracy and efficiency.

• 대한기계학회논문집A
• /
• 제37권7호
• /
• pp.929-935
• /
• 2013

본 논문은 사각 보강 패널에 사용되는 모자형 보강재의 크기 최적화에 대한 결과를 제시하였다. 보강 패널은 1500 ~ 2500 m/s 의 속도를 가지는 발사체와 충돌한다. 모자형 보강재의 크기를 결정하기 위해서 크기 최적화가 수행되었다. 크기 최적화를 수행하기 위해서는 3 개의 함수들로 구성되어 있다. 이 함수들은 목적함수, 제한함수 그리고 설계 함수로 이루어져 있다. 목적 함수는 보강 패널의 1 차 고유 진동수의 최대화가 되도록 하는 것이다. 제함 함수는 보강재의 부피가 사각 패널 부피의 10 % 이내가 되도록 하는 것이며, 설계 변수로는 모자형 보강재의 치수가 된다. 최적화된 모자형 보강재를 이용하한 보강 패널을 사용하여 초고속 충돌에 대한 시뮬레이션을 수행하였으며, 최적화된 보강재에 대해서 속도와 운동 에너지 변화에 대한 결과를 얻었다. 보강 패널의 충돌 저감을 평가하기 위해서 발사체의 운동 에너지와 속도를 무차원화 계산을 수행하여 비교 분석 하였다.

• 한국멀티미디어학회논문지
• /
• 제2권1호
• /
• pp.89-98
• /
• 1999

본 논문에서는 a-Si(amorphous-Silicon) TFT(Thin Film Transistor) LCD (Liquid Crystal Display)상에서 다중 비디오 신호원을 디스플레이 할 수 있는 $\Delta$-shaped 보간 방식올 제안하였다. 제안한 방식은 단순한 회로만으로 구현이 가능하므로 펼드 메모리와 같은 비용의 증가 없이도 평판 디스플레이(FPD : Flat Panel D Display) 시스템에 적용될 수 있다. 제안한 방식과 기존의 방식을 비교하기 위하여 PSNR(Peak Signal Noise Ratio)을 도입하였으며, 컴퓨터 시율레이션상의 처리결과를 에지 특성에 초점을 두어 평가하였다. 컴퓨터 시율레이션을 통해 에지와 이미지의 국부특정의 관점에서 볼 때, 제안한 방식이 기존의 방식보다 우수함을 확인하였다. 마지막으로 제안한 방식의 특성과 트레이드 오프(trade-off)에 대하여 논하였다.

• Earthquakes and Structures
• /
• 제14권1호
• /
• pp.11-20
• /
• 2018

Three-dimensional panels are one of the modern construction systems which can be placed in the category of industrial buildings. There have always been a lot of studies and efforts to identify the behavior of these panels and improve their capacity due to their earthquake resistance and high speed of performance. This study will provide a comparative evaluation of behavior of updated three-dimensional panel's structural components under lateral load in both independent and dependent modes. In fact, this study tries to simultaneously evaluate strengthening effect of three-dimensional panels and the effects of system state (independent, L-shaped and BOX shaped Walls) with reinforcement armatures with different angles on the three-dimensional panels. Overall, six independent wall model, L-shaped, roofed L-shaped, BOX-shaped walls with symmetric loading, BOX -shaped wall with asymmetrical loading and roofed BOX-shaped wall were built. Then the models are strengthened without strengthened reinforcement and with strengthened reinforcements with an angle of 30, 45 and 60 degrees. The applied lateral loading, is exerted by changing the location on the end wall. In BOX-shaped wall, in symmetric and asymmetric loading, the load bearing capacity will be increased about 200 and 50% respectively. Now, if strengthened, the load bearing capacity in symmetric and asymmetric loading will be increased 3.5 and 2 times respectively. The effective angle of placement of strengthened reinforcement in the independent wall is 45 and 60 degrees. But in BOX-shaped and L-shaped walls, the use of strengthened reinforcement 45 degrees is recommended.

• 한국도로학회논문집
• /
• 제17권5호
• /
• pp.19-24
• /
• 2015

PURPOSES : The noise, which is typically generated by fast moving vehicles, can be intercepted by installing a noise barrier with a soundproof panel. However, reflections from the panels cause secondary noise, and hence lower the effectiveness of the panels. In this study, the reduction of reflection noise by considering the shape, especially zigzag one, of the soundproof panel have been evaluated. METHODS : The simulation model used in this study was Nord2000, which simulates real-road situations effectively. Based on the simulation results, the joining angle of $133^{\circ}$ with the pattern width (a) equal to 2 m and the projection height (b) equal to 0.5 m was adapted in the zigzag shape as the best profit designing factors. RESULTS: The measuring results at middle height, 15 m showed reduction at all points except the point with average -1.6 dB. At a greater height of 30 m, 2 points showed reduction. A real-sized facility was constructed to investigate the reflected sound from a zigzag shaped panel up to the height of 5 m. CONCLUSIONS: The reduction effects were detected in all the receive points in the range of 2-6 m distances and 1-5 m heights comparing the plane panel. Compared to plane panel, the noises are reduced at an average of 2.4 dBA.

• 한국전자통신학회논문지
• /
• 제10권11호
• /
• pp.1277-1284
• /
• 2015

본 논문에서는 태양전지를 태양과 항상 법선 방향이 되도록 하기 위해 수평방향으로 놓여진 태양전지판을 ${\pm}90^{\circ}$까지 대칭 회전 가능토록 하는 비선형형상의 가이드홈을 가진 단축 추적장치를 제안하고, 비선형형상에 대한 수식을 정립하고자 한다. 그 결과 가이드 홈의 비선형 형상을 확정할 수 있었고, 특히 회전 링크의 길이가 달라져도 회전링크의 길이를 반영하는 가이드 홈을 정확히 확정할 수 있다. 이를 통해 기존의 1축 추적장치에 비해 약 10%이상의 태양전지 효율향상이 가능하며, 또한 어떤 크기의 태양전지판에 대해서도 최적의 비선형 형상 가이드 홈을 갖는 가이드 부재를 제공할 수 있고 대량 생산도 가능하다.

• 대한건축학회논문집:구조계
• /
• 제34권9호
• /
• pp.11-18
• /
• 2018

As the height of the modular buildings increases, their stability becomes more and more dependent on the core. All traditional construction methods in structural concrete and steel can be utilized for cores in modular buildings but a core system with dry connection is more desirable to complete a greater degree of factory finish and faster erection of modular buildings. In order to do that, the hybrid PC(precast concrete) panel, which has a pair of C-shaped steel beams combined at the top and bottom of a concrete wall, was developed, In this study the cyclic lateral loading test on the hybrid PC panel is carried out and the panel configurations are examined to enhance the structural performance in comparison with the RC wall. Experimental results show that the strength of hybrid PC panel is about 70% of thar ot RC wall and the anchorage of vertical reinforcing bar welded to C-shaped steel beam needs to be improved.

• 대한건축학회논문집:구조계
• /
• 제35권10호
• /
• pp.155-162
• /
• 2019

Hybrid precast concrete panel is a wall element that is able to quickly construct the core wall structure for moderate-rise modular buildings. Hybrid precast concrete panel has unique characteristics which is a pair of C-shaped steel beams combined at the top and bottom of a concrete wall, In this study, an improved anchorage detail for vertical rebar is proposed to ensure the lateral force resistance performance of hybrid precast concrete panel emulating monolithic concrete wall. Also, the structural performance of horizontal connection is investigated experimentally with the bolt spacing parameter. And the behavior of hybrid precast concrete panel with the improved detail is compared with the monolithic concrete wall tested in a previous study. Finally, the required thickness of C-shaped steel beam to eliminate or minimize the deformation in horizontal connection is calculated by prying action equation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.181-182
• /
• 2015

The production technologies of free-form concrete panels are emerging to satisfy the need of modern complex shaped in architectural design. This study aims for introducing and improvising the innovative technique called Rod type mold that overcomes the difficulties in some extent by enabling the mold to be used many times, making the shape of the mold adjustable in a flexible way and describing its production process to provide the alternative solution for the construction of free-form mold with considering the features including reusability and optimization cost across its production process. In this study, the freeform concrete panel shape was designed and experiment was done using computerized numeric control machine and rod type mold. The problems appeared on achieving desired shape while operating on rod type mold. The process of identifying all the root causes and contributing causes that may have generated an undesirable condition were done. Consequently, the conical or semicircular shaped was proposed for the end of Numerical control rod and replaced it with the existing flat shaped end to avoid the detachable problem and to improve rod type mold performance.

• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.106-115
• /
• 2007

In this study, first, child headform model was built up, satisfying requirement in the headform validation test. Also, for decreasing both acceleration peak and deformation, a new hood with dome shaped forming in inner panel was investigated. Next, headform impact, complying with draft of EEVC W/G 17, on the central portion of the newly proposed hood were simulated for a steel hood and three aluminum hoods with different thickness for examining the material and thickness effect on HIC value and inner panel deformation. The analysis results explained that aluminum hoods with dome shaped forming in inner panel were highly promising not only for meeting headform safety regulations but also for leading to weight savings. Finally, hood edge design technology in order to reduce pedestrian injury due to the high stiffness of beam type edge and the rigid support, was discussed. Various types of the foam filled edge were designed and their headform safety performance were evaluated. The edge structure with foam filled in upper one third of section exhibited excellent results.