• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.467-468
• /
• 2007

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.201-202
• /
• 2003

탄소나노튜브는 역학적 물성이 뛰어날 뿐만 아니라 전기적 특성도 우수하여 현재 매우 많은 연구와 응용개발이 시도되고 있다 일반적으로 전기전도성 고분자 복합체를 얻기 위한 방법으로 카본블랙이나 전도성 섬유, 금속섬유, 전도성 분말 등을 고분자에 혼입하는 방법을 주로 이용하지만, 복합체 내에서 나노구조 형성이 가능한 탄소나노튜브를 이용하면 나노물질의 특성상 매우 유리한 점이 많다. 예를 들면, 우수한 전기특성, 낮은 임계농도, 우수한 역학적 성질 둥이다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.255-256
• /
• 2003

열가소성 폴리우레탄 공중합체는 가역적 변형을 갖는 soft segment와 물리적 가교역할을 하는 hard segment로 이루어져 있으며, 이들 두 segment domain의 상분리에 의하여 우수한 탄성효과를 발휘할 수 있으며 또한 적당한 구조제어에 의하여 형상기억효과를 나타내게 할 수 있다. 본 연구자들은 최근 형상기억 폴리우레탄 제조에 있어 soft segment의 배열을 달리함으로써 보다 우수한 역학적 성질을 갖는 시료를 얻을 수 있음을 보고하였다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.195-198
• /
• 2001

최근 지능재료에 관한 연구가 형상기억합금, 반도체 재료, 의료용 재료, 고분자 재료 등에서 활발히 이루어지고 있다. 지능재료 중 형상기억재료는 형상기억, 형상고정, 충격흡수 등의 효과를 갖기 때문에 열적, 역학적, 전기적 및 자기적(magnetic) 자극을 감지함으로써 형상, 위치, 탄성계수, damping, 마찰 등의 특성변화를 통하여 응답을 할 수 있어 응용이 다양하다 형상기억고분자의 경우 가볍고 형상회복률이 높으며 가공성이 우수한 장점을 가지고 있다. (중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.803-804
• /
• 2010

• Fibers and Polymers
• /
• v.4 no.3
• /
• pp.114-118
• /
• 2003

The prepolymer and the final polyurethane (PU) block copolymer were synthesized by reacting 4,4-methylene bis(phenylisocyanate) with poly(tetramethylene glycol) and the prepolymer with 1,4-butanediol as a chain extender, respectively, to investigate the relation between phase separation and it's resulting properties. According to FT-IR data, the phase separation of hard and soft segments in the prepolymer and the PU block copolymer grew bigger by increasing the hard segment content, and the PU showed more dominant phase separation than the prepolymer. The heat of fusion due to soft segments decreased in both the prepolymer and the PU by increasing the hard segment content, whereas the heat of fusion due to hard segments increased in the PU did not appear in the prepolymers. The breaking stress and modulus of the prepolymer increased by increasing the hard segment content, and the elongation at break decreased gradually, and the PU showed the highest breaking stress and modulus at 58% hard segment content. However, the best shape recovery of the PU was obtained at 47% hard segment content due to the existence of proper interaction among the hard segments for shape memory effect. Consequently, the mechanical properties and shape memory effect of the PU were influenced by the degree of phase separation, depending on the incorporation of chain extender as well as the hard segment content.

• Journal of Korea Foundry Society
• /
• v.18 no.6
• /
• pp.534-540
• /
• 1998

6061Al-matrix composite with TiNi shape memory fiber as reinforcement has been fabricated by Permanent Mold Casting to investigate the mechanical properties of the smart composites. The composites have showed good interface bonding as a result of the analysis of SEM and EDX. The smartness of composite is given due to the shape memory effect of the TiNi fiber which generates compressive residual stresses in the matrix material when heated after being prestrained. The tensile strength of the composites was tested at temperatures between $90^{\circ}C$ and room temperature with increasing amount of pre-strain, and it showed that the tensile strength at $90^{\circ}C$ was higher than that of the room temperature. Especially, the tensile strength of the composite increases with increasing pre-strain. It showed that hardness of matrix was higher than that of common 6061Al alloy.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.3
• /
• pp.233-239
• /
• 2004

Smart material is used in various applications such as for glass frame, for medical instruments and for a part of sensors. Smart composite materials ran be applied to a part of aircraft and to the on-line monitoring system for industrial structures, using the shape memory effect. However, it is very difficult to simulate and analyze the shape memory effect in smart composites. In this paper, a two dimensional axisymmetric model was proposed to analyze the smart composite of one fiber and matrix using the finite element method(FEM). The finite element analysis was carried out in two renditions of the room temperature(293K) and a higher temperature (363K). The results we.e compared with the experimental results to confirm the validity of the analysis. In addition, the acoustic emission(AE) technique was used to study the microscopic damage behavior and the effect of pre-strains on TiNi/A16061 shape memory alloy composite.

• Advances in nano research
• /
• v.13 no.3
• /
• pp.285-295
• /
• 2022

Creation of plastic deformation under seismic loads, is one of the most serious subjects in RC structures with steel bars which reduces the life threatening risks and increases dissipation of energy. Shape memory alloy (SMA) is one of the best choice for the relocating plastic hinges. In a challenge to study the seismic response of concrete moment resisting frame (MRF), this article investigates numerically a new type of concrete frames with nano fiber reinforced polymer (NFRP) and shape memory alloy (SMA) hinges, simultaneously. The NFRP layer is containing carbon nanofibers with agglomeration based on Mori-Tanaka model. The tangential shear deformation (TASDT) is applied for modelling of the structure and the continuity boundary conditions are used for coupling of the motion equations. In SMA connections between beam and columns, since there is phase transformation, hence, the motion equations of the structure are coupled with kinetic equations of phase transformation. The Hernandez-Lagoudas theory is applied for demonstrating of pseudoelastic characteristics of SMA. The corresponding motion equations are solved by differential cubature (DC) and Newmark methods in order to obtain the peak ground acceleration (PGA) and residual drift ratio for MRF-2%. The main impact of this paper is to present the influences of the volume percent and agglomeration of nanofibers, thickness and length of the concrete frame, SMA material and NFRP layer on the PGA and drift ratio. The numerical results revealed that the with increasing the volume percent of nanofibers, the PGA is enhanced and the residual drift ratio is reduced. It is also worth to mention that PGA of concrete frame with NFRP layer containing 2% nanofibers is approximately equal to the concrete frame with steel bars.

• International Journal of Aeronautical and Space Sciences
• /
• v.8 no.2
• /
• pp.76-81
• /
• 2007

The fiber reinforced laminated composite structures are very susceptible to be damaged when they are impacted by foreign objects. To increase the impact resistance of the laminated composite structures, shape memory alloy(SMA) thin film is embedded in the structure. For the numerical impact analysis of SMA hybrid composite structures, SMA modeling tool is developed to consider pseudoelastic effect of SMAs. Moreover, the damage analysis is considered using failure criteria and a simple damage model for reasonable impact analysis. The numerical results are verified with the experimental ones. Impact analyses for composite plate with pre-strained SMAs are numerically performed and the damage areas are investigated.