• Korean Journal of Materials Research
• /
• v.22 no.11
• /
• pp.591-597
• /
• 2012

For heat exchanger applications, 2-ply clad materials were fabricated by rolling of aluminum (Al) and mild steel sheets. Effects of annealing temperature on interface properties, especially on inter-layer formation and softening of strain hardened mild-steel, for Al/mild steel clad materials, were investigated. To obtain optimum annealing conditions for the Al/mild steel clad materials, annealing temperature was varied from room temperature to $600^{\circ}C$. At the annealing temperature about $450^{\circ}C$, an inter-layer was formed in an island-shape at the interface of the Al/mild steel clad materials; this island expanded along the interface at higher temperature. By analyzing the X-ray diffraction (XRD) peaks and the energy dispersive X-ray spectroscopy (EDX) results, it was determined that the exact chemical stoichiometry for the inter-layer was that of $Fe_2Al_5$. In some samples, an X-layer was formed between the Al and the inter-layer of $Fe_2Al_5$ at high annealing temperature of around $550^{\circ}C$. The existence of an X-layer enhanced the growth of the inter-layer, which resulted in the delamination of the Al/mild-steel clad materials. Hardness tests were also performed to examine the influence of the annealing temperature on the cold deformability, which is a very important property for the deep drawing process of clad materials. The hardness value of mild steel gradually decreased with increasing annealing temperature. Especially, the value of hardness sharply decreased in the temperature range between $525^{\circ}C$ and $550^{\circ}C$. From these results, we can conclude that the optimum annealing temperature is around $550^{\circ}C$ under condition of there being no X-layer creation.

• Korean Journal of Veterinary Research
• /
• v.45 no.2
• /
• pp.139-149
• /
• 2005

In order to study about the lobule and layer formation and cell migration of the mouse cerebellum from at the birth to 15th day effected by 2.5, 5 and 10 Gy r-raddiation at the 19th pregnancy. The routine tissue preparation and staining procedure, Immunohistochemical staining method by the several antibody and western brotting method were utilized from the birth to the15th day. The results were as followings. 1. The body and cerebellum weights were more slowly increase of the the 2.5 Gy, 5 Gy and 10 Gy irradiation group compare to the control group, and the health condition of the 2.5 Gy group was a little bad. but the 10 Gy group was more severe and begun to die from the 12th day after birth. 2. The thickness, proliferation and migration of the 2.5, 5 and 10 Gy irradiated external granular cells from the maginal zone to the medullary area forming the molecular layer from the 6th day to the 15th day after birth were thinner, weaker and more slower according to the radiated dosages than the control group in the cresyl violet staining. 3. The proliteration, migration and lobulation of the 5 Gy radiated groups from the first day to the 15th day after birth were more weak, incomplete and irregular shape in the immunostaining with Dab, Cdk5, P35, calbindin and Zebrin antibody. 4. In the western blotting analysis using the Reelin, Dab, Cdk5 and P35 antibody. The Bands were in the 60 KD, 80 KD, 33 KD and 35 KD, and there were no differences between the control and irradiated groups in the molecular band except the Reelin. 5. As a results, the proliferation and migration of the outer granular and purkinje cells, and lobulation of the cerebellum by the several dosaege of the ${\gamma}$-ray radiation were proportionally incomplete according to dosage.

• Applied Biological Chemistry
• /
• v.38 no.5
• /
• pp.435-439
• /
• 1995

Some characteristics and pathogenicity of Hyphantria cunea nuclear polyhedrosis virus (HcNPV), a potential microbial pesticide was studied. H. cunea NPV replicated in the nucleus of S. frugiperda cells cultured in the TNMFH medium. In case of virus infected cell, prepolyhedra formation was observed at 24hrs post-infection. At 48 hrs post-infection, Most of the infected cell contained many mature polyhedra which were released into culture media 72 hrs post-infection, with the cells grown in suspension culture, pH of the culture medium increased during the virus replication: the pH of fresh medium was 6.35 and rose to 6.77 within 120 hrs. Polyhedra formed a band in linear density gradient of sucrose by centrifugation, which co-sedimented with $50{\sim}55%$ sucrose. The shape of the purified polyhedra was mostly tetragonal hexahedron and its size was about $2.5{\mu}m$. Electron microscopy and phase contrast microscopy showed that many bundled nucleocapsids were occluded in mature polyhedra at 48 hrs post infection. H. cunea larvae infected with NPV showed a higher motality in the second and third instar than in the fourth instar. Death rate of H. cunea larvae in the second and third instar fed with leaves coated with $1.5{\times}10^{9}{\sim}l.5{\times}10^{7}PIBs/ml$ reached more than 90%.

• Korean Journal of Ichthyology
• /
• v.27 no.4
• /
• pp.300-305
• /
• 2015

The characteristics of 11 spawning sites in the natural environment of the Korean endemic species, Liobagrus somjinensis were investigated in the Yocheon (stream) of Seomjingang (river), located in Sikjeong-dong, Namwon-si, Jeollabuk-do, Korea from May to June 2015. The spawning sites had largely two parts, the upper region close to the surface of the waters and under region at bottom: the upper part was covered with a large and flat boulder over about 256 mm in size, whereas the under part consisted mainly of pebbles and sand. The large boulder put on the upper region may be seen as a bulwark for guarding eggs laid at the under (bottom) region. All the sites under the boulder showed a similar structure having a small hollow filled with an egg mass and an individual (male). The spawning bottoms left clean having no any benthic invertebrates and detritus. The egg shape was spherical, yellow and covered with a transparent membrane and the egg size was $3.31{\pm}0.15mm$ (n=30) in diameter. The development stage of each egg mass under the boulder was almost same from morula stage to formation stage of eye lens. The average number of eggs in 11 spawning sites was $121{\pm}35.5$ (84~176) and the average number of female fecundity in ovary was $143{\pm}31.3$ (110~232).

• Journal of Periodontal and Implant Science
• /
• v.38 no.1
• /
• pp.51-58
• /
• 2008

Purpose: In dental clinical fields, various periodontal membranes are currently used for periodontal regeneration. The periodontal membranes are categorized into two basic types: resorbable and non-resorbable. According to the case, clinician select which membrane is used. Comparing different membranes that are generally used in clinic is meaningful. For this purpose, this study evaluates histological effects of various membranes in canine one wall intrabony defect models and it suggest a valuation basis about study model. Material and Method: The membranes were non-resorbable TefGen $Plus^{(R)}$, resorbable Gore Resolut $XT^{(R)}$ and resorbable $Osteoguide^{(R)}$. One wall intrabony defects were surgically created at the second and the mesial aspect of the fourth mandibular premolars in either right or left jaw quadrants in two dogs. The animals were euthanized 8 weeks post-surgery when block sections of the defect sites were collected and prepared for histological evaluation. Results: 1. While infiltration of inflammatory cells were observed in control, TefGen $Plus^{(R)}$ and Gore Resolut $XT^{(R)}$, it was not observed in $Osteoguide^{(R)}$. 2. TefGen $Plus^{(R)}$ had higher integrity than others and $Osteoguide^{(R)}$ was absorbed with folding shape. Gore Resolut $XT^{(R)}$ was divided everal parts during resorbtion and it was also absorbed from inside. 3. Quantity of new bone and new cementum was not abundant in all membranes. 4. For histologic evaluation of membranes we should consider infiltration of inflammatory, migration of junctional epithelium, integrity of membrane, quantity of new bone and new cementum, connective tissue formation and aspect of resorption. Conclusion: This histologic evaluation suggests that $Osteoguide^{(R)}$ provides periodontal regenerative environment with less inflammatory state. It is meangful that this study model suggests a valuation basis about other study model.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.109-115
• /
• 2006

The calcifying odontogenic cyst (COC) predominantly affected Maxillary anterior segment and it is developmental cyst. But COC showed diverse terminology or classification, clinicopathologic features as well as its biologic behavior COC usually presents as slowly enlarging but otherwise symptomless swelling. Association with impacted teeth and odontoma is described in $24{\sim}30%$. The epithelial lining of COC(ghost cell) appears to have ability to induce the formation of dental tissues in the asjcents connective tissue wall. This case is a COC associated with a odontoma involving an impacted left maxillary canine in 14-year-old female child. Radiographic examination revealed a well-demarcated radiolucent lesion partially occupied by a radiopaque mass, involving the left canine. The histologic sections showed cystic cavity lined with ameloblastic epithelium containing ghost cell masses with regular and irregular shape odontoma. The final pathologic diagnosis was calcifying odontogenic cyst with odontoma(Type IB by Preatorius). Enucleation and elimination of the included tooth were performed. Now endodontic treatment was preformed on the 1st premolar of the upper left jaw, which had a lesion. And the patient and their parents want to have the orthodontic treatment performed and would like to keep the space maintainer.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.1
• /
• pp.17-22
• /
• 2000

A quaternary alloy film of $CoCr_{16.2}Pt_{10.8}Ta_4$was investigated for its magnetic properties and c-axis orientation with and without Ti underlayer. Additional elements such as Ta, Pt have been frequently introduced in CoCr alloy film for perpendicular recording as a means of improving magnetic performance. It has been reported that the addition of Pt and Ta in CoCr increase the coercivity and the magnetic isolation of columnar grains, respectively. However, CoCrPtTa perpendicular magnetic layer should be more increased its perpendicular magnetic anisotropy than at present for the application of ultrahigh recording density. The improvement of underlayers and substrate materials is one of the promised schemes to intensify the perpendicular magnetic anisotropy. In this study, the insertion of Ti underlayer shows the remarkable improvement of c-axis orientation compare with the direct deposition on the bare glass. The mechanism about this effect of Ti underlayer on CoCrPtTa is not to be clarified yet. Meanwhile, it is found that the magnetic domain of CoCrPtTa on 20 nm Ti underlayer has the continuous stripe pattern but the one of CoCrPtTa on 90 nm Ti underlayer shows the discrete mass type from the results of MFM investigation. This phenomenon is to be a distinct evidence that the improvement of perpendicular anisotropy by the adoption of Ti underlayer is originated from the reinforcement of the grain boundary segregation in CoCrPtTa alloy. Moreover, the transition of the M-H hysteresis pattern with the thickness of Ti underlayer indicates that the major contribution of Ti underlayer is not the magnetocrystalline anisotropy but the shape anisotropy due to the formation of uniform columnar grains by the nonmagnetic alloy segregation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.4
• /
• pp.390-396
• /
• 2012

In order to understand the nature of dendritic zinc growth, electrochemical zinc redox reaction on nickel plate was investigated in aqueous solutions containing different concentrations, 0.2, 0.1 and 0.02 $mol{\cdot}dm^{-3}$ (M), of zinc sulfate ($ZnSO_4$) or zinc chloride ($ZnCl_2$). Zinc ion was efficiently reduced and oxidized on nickel in the high-concentration (0.2 M) solution, whereas relatively poor efficiency was obtained from the other low-concentration solutions (0,1 and 0.02 M). Cyclic voltammetry (CV) analysis revealed that the 0.2 M electrolyte solution decomposes at more positive potentials than the 0.1 and the 0.02 M solutions. These results suggested that the concentration of electrolyte solution and anion would be an important factor that suppresses the reaction of the zinc dendrite formation. Scanning Electron Microscopy (SEM) data revealed that the shape of dendritic zinc and its growing behavior were also influenced by electrolyte concentration.

• Journal of the Korean Chemical Society
• /
• v.39 no.6
• /
• pp.446-452
• /
• 1995

Lithium intercalates, $Li_xFeMoO_4Cl$ ($1{\leq}X{\leq}2$) prepared by electrochemical lithiation of $FeMoO_4Cl$ crystallizes in monoclinic structure for all x values as revealed by x-ray diffraction and galvanostatic discharge experiments. According to the x-ray photoelectron spectroscopic study, Fe(III) is at first reduced to Fe(II) upon lithium intercalation with the x domain of $0{\leq}X{\leq}1$, where the crystal symmetry is changed from tetragonal to monoclinic. On the other hand, Mo(VI) is reduced to lower valent state upon further lithium intercalation ($1{\leq}X{\leq}2$), where no crystal symmetry transformation and reduction of Fe(II) to lower valent state are observed. The Mo 3d spectrum for $Li_2FeMoO_4Cl$ appears as a complex shape, but can be deconvoluted into the three sets of the doublet on the basis of Gaussian function, those which correspond to Mo(VI), Mo(V) and Mo(IV) states, respectively. The mixed valent states of molybdenum after further lithiation may be due to a competitive reaction between the formation of Mo(V) and its disproportionation to Mo(IV) and Mo(VI).

• Ocean Systems Engineering
• /
• v.6 no.1
• /
• pp.61-97
• /
• 2016

This is the second of two papers on the 3D numerical modeling of nearshore hydro- and morphodynamics. In Part I, the focus was on surf and swash zone hydrodynamics in the cross-shore and longshore directions. Here, we consider nearshore processes with an emphasis on the effects of oceanic forcing and beach characteristics on sediment transport in the cross- and longshore directions, as well as on foreshore bathymetry changes. The Delft3D and XBeach models were used with four turbulence closures (viz., ${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES) to solve the 3D Navier-Stokes equations for incompressible flow as well as the beach morphology. The sediment transport module simulates both bed load and suspended load transport of non-cohesive sediments. Twenty sets of numerical experiments combining nine control parameters under a range of bed characteristics and incident wave and tidal conditions were simulated. For each case, the general morphological response in shore-normal and shore-parallel directions was presented. Numerical results showed that the ${\kappa}-{\varepsilon}$ and H-LES closure models yield similar results that are in better agreement with existing morphodynamic observations than the results of the other turbulence models. The simulations showed that wave forcing drives a sediment circulation pattern that results in bar and berm formation. However, together with wave forcing, tides modulate the predicted nearshore sediment dynamics. The combination of tides and wave action has a notable effect on longshore suspended sediment transport fluxes, relative to wave action alone. The model's ability to predict sediment transport under propagation of obliquely incident wave conditions underscores its potential for understanding the evolution of beach morphology at field scale. For example, the results of the model confirmed that the wave characteristics have a considerable effect on the cumulative erosion/deposition, cross-shore distribution of longshore sediment transport and transport rate across and along the beach face. In addition, for the same type of oceanic forcing, the beach morphology exhibits different erosive characteristics depending on grain size (e.g., foreshore profile evolution is erosive or accretive on fine or coarse sand beaches, respectively). Decreasing wave height increases the proportion of onshore to offshore fluxes, almost reaching a neutral net balance. The sediment movement increases with wave height, which is the dominant factor controlling the beach face shape.