• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.249-270
• /
• 1993

For understanding of anatomy, physiology, and diseases of human TMJ, it is required to evaluate quantitatively the movement of the disc and condyle head of mandible. The histologic section of cadaver TMJ were examined, and the magnification of the MR image and its details of anatomy were evaluated. And then a quantitative analytic method, by comparing the Sectograph and the MR image of vital human TMJ, was proposed. For this study, 15 subjects(Male, 24~35years) were selected from a prosthodontic examination randomly, and each subject’s five interocclusal rubber registration records were made on the ICP, and 5, 10, 15, and 20mmjaw opening positions. All subjects were radiographed with a Denar Quint Sectograph Image System(Denar Corp., USA), and imaged with a MRP-20EX MR Image System(0.2T, Permanent Magnet Type, Hitachi Medical Corp., Japan) using an 100mm diameter bilateral type surface coil. These images were traced on the acetate tracing paper, and analyzed In this study, the findings led to the following conclusions. 1. In comparison of the histologic section of autopsy specimen with the MR image at the same section, the size(dimension) of MR image was 70% of the real one. It was possible to recognize the shape of articular disc, anterior and posterior attachments, and adjacent soft tissues, because of the excellent reproducibility of anatomical structure. 2. When we compared the amount of joint space on MR image with that of joint space on sectograph, the amount of joint space on sectograph was significantly greater than that of joint space on MR image, except at the top of condylar head. 3. The position of minimum joint space on sectograph at intercuspal position didn't coincide with the middle position of articular disc on MR image, and was approximately in the anterior third of posterior band of articular disc. 4. The amount of condylar movement on MR image at opening movement was greater than that of articular disc movement. From Intercuspal position to 5mm jaw-opening movement, the condylar movement showed hinge one, and over the range 5mm jaw-opening it suggested hinge & translatory one. 5. In terms of area variation of articular disc measured on MR image in sagittal plane, the area of posterior band increased with increasing the amount of Jaw opening, but the area of anterior band decreased conversely.

• Journal of the Korean Society of Costume
• /
• v.20
• /
• pp.125-135
• /
• 1993

The purposes of this research are firstly to define the characteristics of movement on the costume, secondly to demonstrate that fine art, expecially in relation to kinetic art, has become a good motif in modern costume de-sign, and thirdly to examin the characteristics of movement as shown in modern costume de-sign. For this study, we selected and analyzed some costume designs among those introduced in fashion magazines, which are Collections, Fashion-Preview, Fashion Show, Collezioni, and L'Officiel that have been issued since 1988. As this research is carried out only through the analysis of pictures, it is not ac-companied by a study on material itself. The result of this study is that the ex-pression of movement on modern fashion can be shown in two ways, one is the inclusive and subordinate movement expressed on the cloth-ing according to the motion of body when they are worn, and the other is the movement caused by the very designs of clothing. And the latter can be also divided in two ways, the illusionistic movement and the actual move-ment. The expression of actual movement is made through the emphasis of direction, rhythm, and dimension of the costume. And the illusionistic movement is expressed by the de-sign to which the textile pattern or reflection of light is applied so that the movement is larger than the actual movement. A sense of direction expressed on the cos-tume by the actual movement creates a light rhythm and adds interest to the costume. This reflects a part of psychology of modern men who are not accustomed to the statics. In the rapidly changing society of information our modern men seek after movement even in the statics. It is also true in the clothing and they seem to get a psychological rest through the immediated visual change as shown in fashion design. The simple and cheerful rhythm expressed by the illusionistic movement on the costume is attempted in order to overcome the static tediousness caused by simple design. These elements of movement cause the en-largement of visible range and create another enlarged shape other than the real one, so that they come to remove the dullness and monot-ony in costume design and provoke interest in costume, as if kinetic art reveals the various aspects that transcend the closed area of fine art upon the motif of 'movement'. finally, as this paper deals with the ex-pression of movement as shown in the costume design which prevailed after 1988, it is desir-able hereafter to study more about the fashion since 1950 when kinetic art began in earnest, along with the comparative study on the ex-pression of movement in our Korean designer's and foreign designer's works.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.571-588
• /
• 2016

Eucalyptus pellita F. Muell is one of pulp woods that is being developed through breeding plantation programs in Indonesia. The research aimed at exploring the chemical and morphological characteristics of fiber, and to determine the rank of plus trees from 4 provenances based on the suitability for pulps. The materials included the plus trees of E. pellita (9 years) from the 2nd generation of progeny tests in Pelaihari, South Borneo. Wood properties under investigation included the chemical properties and morphological fiber characteristics (fiber dimensions and its derived properties). In the present study, data were analyzed using descriptive statistic, Analytic Hierarchy Process (AHP) and Pearson's correlation. Results showed that the chemical properties of E. pellita, i.e. the contents of ethanol-toluene extractives, hot water soluble extractives, holocellulose, alphacelullose, and lignin were $3.08{\pm}1.00%$, $1.41{\pm}0.38%$, $75.26{\pm}2.58%$, $49.02{\pm}2.88%$, and $29.49{\pm}1.86%$, respectively. The average values of wood fiber morphology were $1.02{\pm}0.08$ mm (fiber length), $13.25{\pm}1.64{\mu}m$ (fiber diameter), of $6.94{\pm}1.70{\mu}m$ (lumen diameter), $3.15{\pm}0.52{\mu}m$ (fiber wall thickness), $0.97{\pm}0.30$ (Runkel ratio), $0.57{\pm}0.10$ (Luce's shape factor), $78.21{\pm}10.34$ (slenderness ratio) and $130.91{\pm}33.77{\times}10^3{\mu}m^3$ (solids factor). The AHP scoring rank indicated that the best individuals were 28.4.3.28 (Kiriwo Utara), 12.1.5.28 (North Kiriwo), 19.11.5.45 (Serisa Village), 3.8.4.9 (South Kiriwo), and 6.6.3.15 (South Kiriwo). Pearson correlation analysis showed significant correlations between the levels of fiber length with alpha-cellulose content (r = 0.39) as well as the fiber length with ethanol-toluene extractive contents (r = -0.41).

• Atmosphere
• /
• v.24 no.2
• /
• pp.173-188
• /
• 2014

The KMA has cooperated with the Oklahoma University in USA to develop a Polarimetric Radar Data (PRD) simulator to improve the microphysical processes in Korea Local Analysis and Prediction System (KLAPS), which is critical for the utilization of PRD into Numerical Weather Prediction (NWP) field. The simulator is like a tool to convert NWP data into PRD, so it enables us to compare NWP data with PRD directly. The simulator can simulate polarimetric radar variables such as reflectivity (Z), differential reflectivity ($Z_{DR}$), specific differential phase ($K_{DP}$), and cross-correlation coefficient (${\rho}_{hv}$) with input of the Drop Size Distribution (DSD) and scattering calculation of the hydrometeors. However, the simulator is being developed based on the foreign observation data, therefore the PRD simulator development reflecting rainfall characteristics of Korea is needed. This study analyzed a potential application of the 2-Dimension Video Disdrometer (2DVD) data by calculating the raindrop axis ratio according to the rain-types to reflect Korea's rainfall characteristics into scattering module in the simulator. The 2DVD instrument measures the precipitation DSD including the fall velocity and the shape of individual raindrops. We calculated raindrop axis ratio for stratiform, convective and mixed rainfall cases after checking the accuracy of 2DVD data, which usually represent the scattering characteristics of precipitation. The raindrop axis ratio obtained from 2DVD data are compared with those from foreign database in the simulator. The calculated the dual-polarimetric radar variables from the simulator using the obtained raindrop axis ratio are also compared with in situ dual-polarimetric observation data at Bislsan (BSL). 2DVD observation data show high accuracies in the range of 0.7~4.8% compared with in situ rain gauge data which represents 2DVD data are sufficient for the use to simulator. There are small differences of axis ratio in the diameter below 1~2 mm and above 4~5 mm, which are more obvious for bigger raindrops especially for a strong convective rainfall case. These differences of raindrop axis ratio between domestic and foreign rainfall data base suggest that the potential use of disdrometer observation can develop of a PRD simulated suitable to the Korea precipitation system.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.154-159
• /
• 1983

A Gymnophallid cercaria was found in the gonadal tissue of Tapes philippinarum, and was described as a new species, Cercaria tapes n. sp. The host clams were collected from the intertidal zone of Seo-myon, Seo-chon gun, Korea from September 1980 to August 1981. The size of sporocysts was $380-650{\times}130-160{\mu}m$. The anterior part of the cercaria bears a subterminal opening and pharynx. The sporocyst bears ca. 30 cercariae and germ balls. The cercaria is elliptical in shape. The dimension of body is $160-187{\times}62-77{\mu}m$. the tail stem is $47-52{\times}17{\mu}m$, and the tail furcae is $67-72{\times}12-15{\mu}m$. Excretory bladder is Y-shaped, and the flame cell formula is 2(1)+(1)=4. The infection rate of the cercaria to the host clam was $2.01\%$ (42 infected/2,086 short-necked clams observed). The highest infection rate ($5.74\%$) was found in March, and the lowest one ($0.4\%$) observed in January. No infection was detected in May and June. The infection rates varied with the size of the short-necked clam. It was the clams of host of 2.1-3.0 cm, 3.1-4.0 cm and 4.1-5.0 cm in shell length are $0.38\%,\;15.3\%$ and $0.09\%$ respectively. The cercaria was not observed in the specimens smaller than 2.0 cm in shell length.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.11-19
• /
• 2013

In this paper, we designed and implemented the planar monopole antenna using the coupling effect for the multi-band characteristic. A parasitic element for the multi-band characteristic based on a rectangular patch with single resonance is inserted. Spiral shaped parasitic element is used for minimizing the antenna size and obtaining the multi-resonance characteristic. The frequency characteristics are modified and optimized by varying specific parameters. By inserting an L-shaped resonator at both sides of the feed line which connected through the via hole to the ground plane, unnecessary frequency bands are eliminated. Proposed antenna dimension is $40{\times}60{\times}1mm^3$. It is fabricated on the FR-4 substrate(${\varepsilon}_r$=4.4) using a microstrip line of $50{\Omega}$ for impedance matching. By measurement results, the characteristic of the return loss under -10 dB are 1.714~2.496 GHz, 2.977~4.301 GHz, and 4.721~6.315 GHz, and the radiation patterns have omni-directional shapes.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.1
• /
• pp.27-36
• /
• 1998

The purpose of this study was to obtain information on the clinical and radiographic features of the fibro-osseous lesions in the jaws. For this study, the author examined and analysed the clinical records and radiographs of 71 cases of 68 patients in fibrous dysplasia, 35 cases of ossifying fibroma and 30 cases of 16 patients of periapical cemental dysplasia diagnosed by clinical and radiographic or histopathological examinations. The obtained results were as followings: L Fibrous dysplasia occurred most frequently in the 2nd decade (30.0％), ossifying fibroma in the 3rd-4th decades, periapical cemental dysplasia in the 4th decade, and all of three lesions showed slight predilection in females. In most cases, chief complaints were painless facial swelling in fibrous dysplasia and ossifying fibroma, and periapical cemental dysplasia was found accidentally in radiographs. 2. Fibrous dysplasia was occurred more frequently in maxilla, ossifying fibroma in mandible and both lesions in premolar-molar area. Periapical cemental dysplasia was occurred most frequently in the mandibular anterior area. The size of fibrous dysplasia was larger than that of ossifying fibroma, and the shape of ossifying fibroma was more round and elliptical than fibrous dysplasia whose was fusiform. 3. Fibrous dysplasia was shown homogeneous radiopaque shadow of 57.6％ and ossifying fibroma & periapical cemental dysplasia were shown mixed appearance of radiolucency and radiopacity shadows at 74.2％, 60.0％, respectively. 4. Fibrous dysplasia was entirely shown poorly defined at 87.7％, but ossifying fibroma & periapical cemental dysplasia were shown well outlined at 60.0％, 70.0％, respectively. 5. Cortical thinning and expansion were observed in fibrous dysplasia and ossifying fibroma, and severe in ossifying fibroma than fibrous dysplasia, and those signs were not seen in periapical cemental dysplasia. Loss of lamina dura was dominant in fibrous dysplasia and root resorption was dominant in ossifying fibroma. Displacement of mandibular canal and the degree of the increase of vertical dimension were alike in both lesions. Displacement of maxillary sinus or nasal cavity, thinning & expansion of the maxillary sinus were dominant in fibrous dysplasia. 6. Polyostotic fibrous dysplasia was occurred at 5.9％, Multiple periapical cemental dysplasia at 43.7％. Occurrence rate in the edentulous area of fibrous dysplasia and ossifying fibroma were 7.0％, 8.6％, respectively.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.195-200
• /
• 1999

We made sharp optical fiber tips with less than 100 nm diameter by using the heating and pulling method with a good repetition and fabricated the photon scanning tunneling microscope (PSTM) using constant intensity mode. The 3-dimensional PZT (Piezoelctric transducer) scanner made of a long PZT tube is consisted of three divided parts, that is, a pair of $\pm$ x and a pair of $\pm$y scanning parts and a z scanning part for the fine approach and scanning. The scanning dimension is 1.43 $\mu\textrm{m}$$\times$1.76 $\mu\textrm{m}$. The height of a optical tip to maintain a constant height within $1/{\lambda}_0$ (${\lambda}_0$ is the incident wavelength) from surface of a specimen to a optical tip is controlled automatically by using the electric feedback circuit. The 3-dimensional shape of standing evanescent waves generated on the surface of a dove prism was measured successfully by using the constant intensity mode PSTM.

• Journal of Korea Water Resources Association
• /
• v.41 no.5
• /
• pp.517-525
• /
• 2008

Regional rainfall quantile depends on the identification of hydrologically homogeneous regions. Various variables relevant to precipitation can be used to form regions. Since the type and number of variables may lead to improve the efficiency of partitioning, it is important to select those precipitation related variables, which represent most of the information from all candidate variables. Multivariate analysis techniques can be used for this purpose. Procrustes analysis which can decrease the dimension of variables based on their correlations, are applied in this study. 42 rainfall related variables are decreased into 21 ones by Procrustes analysis. Factor analysis is applied to those selected variables and then 5 factors are extracted. Fuzzy-c means technique classifies 68 stations into 6 regions. As a result, the GEV distributions are fitted to 6 regions while the lognormal and generalized logistic distributions are fitted to 5 regions. For the comparison purpose with previous results, rainfall quantiles based on generalized logistic distribution are estimated by at-site frequency analysis, index flood method, and regional shape estimation method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1726-1732
• /
• 2008

Injection molding is one of plastic forming technology which can easily mass-produce plastic parts with various and even complex shape. The technology has lots of difficulties in making a good part due to phase change of material, high applied pressure, and fast melt flow speed in the cavity. To overcome the problems, they had to make trial and error method until the CAE(Computer Aided Engineering) could be a tool for concurrent engineering. In this paper, we investigate the optimal design for a plastic DVD tray part by systematic approach of the commercial CAE program. In design, we should consider two objectives which are both dimensional stability and cost-down. The dimension of the part is crucial because the tray should carry a DVD correctly, but the part is too thin to injection-mold easily. In order to improve the moldability, the mold is designed in the form of stack mold which is a kind of 4 hot runner system. In first, we changed the stack-mold system with one hot-runner to cost down, and decided the optimal position of the gate. After that, we investigate the effect of both the layout of cooling channels and the cooling temperature on the shrinkage of the DVD tray. A optimal simulation approach, the gate design is 2Gate#3 and the layout is Case2 cooling line as the optimal temperature of $70^{\circ}C$. The Moldflow and PC+ABS are used for the CAE program and material respectively.