• 전력전자학회논문지
• /
• 제25권4호
• /
• pp.311-318
• /
• 2020

A photovoltaic (PV) system uses an AC module integrated converter (MIC) to operate PV cells at a maximum power point (MPP) and for high efficiency. The MPP of a PV cell varies depending on partial shading conditions, and loss occurs differently according to the configuration method of the PV-MIC. Therefore, this study compares the losses of passive components and power semiconductors according to the partial shading conditions of the PV module. Theoretical loss analysis is performed using parameters for the datasheet and PSIM simulation results. Analysis results verify that the one-stage PV-MIC demonstrates high efficiency.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.769-780
• /
• 2018

This paper presents an analysis of the power gain under partial shading conditions (PSC) when the partial shade loss is being compensated in photovoltaic(PV) system. To analyze the power gain, our study divides the mismatch loss into partial shade loss and operating point loss. Partial shade loss is defined as the power difference between a normal string and a partially shaded string at the maximum power point (MPP). Operating point loss is defined as the power loss due to the operating point shift while following the MPP of the PV array. Partial shading in a PV system affects the maximum power point tracking (MPPT) control by creating multiple MPPs, which causes mismatch losses. Several MPPT algorithms have been suggested to solve the multiple MPP problems. Among these, mismatch compensation algorithms require additional power to compensate for the mismatch loss; however, these algorithms do not consider the gain or loss between the input power required for compensation and the increased output power obtained after compensation. This paper analyzes the power gain resulting from the partial shade loss compensation under PSC, using the V-P curve of the PV system, and verifies that power gain existence by simulation and experiment.

• 한국태양에너지학회 논문집
• /
• 제34권6호
• /
• pp.75-83
• /
• 2014

Heat loss through windows and doors occupies 20 to 45% of the total heat loss in building. It accounts for a large proportion of the total heat loss in building. In order to suppress the amount of heat flow through the windows and doors were considered actions such as reinforcement of insulation performance of window, adoption of low-e glass, and installation of solar heat shading device. The Purpose of this study is to compare solar heat shading performances of 3 types of internal blinds in the summer. In order to verify the solar heat shading performances of the blinds, a roll blind, blind A(Venetian blind) and blind B(Daylight guiding venetian blind)were installed in the four rooms with the same environmental conditions. As a result of the experiment, the blind B, blind A, roll blind showed an excellent performance in that order. Its because the blind B is made of aluminum materials coated with special paints on surface. It doesn't converted to long wave by short wave light. and it is reflected to short wave to outside.

• 한국작물학회지
• /
• 제32권1호
• /
• pp.10-15
• /
• 1987

Burley 21을 공시품종으로 하여 건조실은 파이프 비닐하우스를 이용하였고, 시험 I 은 차광율을 10∼90%까지 20%씩 차이를 두어서 5 처리를 하였으며, 시험 II는 흑색차광막, 차광강과 5가지 유색비닐 등으로 차광재료를 달리하여 잎담배 건조시 차광효과와 알맞은 차광재료를 달리하여 잎담배 건조시 차광효과와 알맞은 차광재료를 밝히기 위하여 본 실험을 수행하였던 바 결과를 요약하면 다음과 같다. 1. 차광량이 않을 수록 온도가 낮고 습도는 높은 경향이었다. 2. 노변 전까지의 차광효과는 엽중탈수속도를 지연시키는데 있었다. 3. 급건엽발생은 차광량이 많을 수록 적었으나 차광 70％ 이상에서는 큰 차이가 없었다. 4. 품질 및 물리성은 50％ 이하의 차광구에서 불량하였으나, 그 이상에서는 큰 차이가 없었다. 5. 건조시 차광량의 하한선은 70％ 본다. 6. 유색비닐 중 주황색, 백색 및 자주색비닐은 흑색차광막과 충분한 대비효과를 가지고 있다. 그러나 백색비닐은 광에 의한 내구성이 가장 약하였다. 7. 가시광선의 광질 차이는 건조에 거의 영향을 미치지 않았다. 8. 흑색계통의 차광재료는 차광량은 많으나 광energy를 흡수하여 하우스 내 온도를 높이므로, 내구성이 크고 광 반재형 차광재료의 개발이 요구되었다.

• KIEAE Journal
• /
• 제17권2호
• /
• pp.29-34
• /
• 2017

Purpose: Recently, significant heat loss through the window takes place in buildings. Nevertheless, there exists little literature concerning the exterior horizontal shading devices and the design criteria are not clearly settled yet. Applying the exterior horizontal shading devices is more efficient as compared to the interior shading devices in that solar radiation can be directly blocked before passing through the window or the envelope. The purpose of this study is to reduce the internal load by designing the exterior horizontal shading devices and verify the degree of reduction in energy consumption. Method: This study aims to reduce energy consumption in cooling and heating through proposing proper length and shape of the exterior horizontal shading devices in public buildings. In the process, actual energy data and the Design Builder simulation program are utilized. In addition, economic aspect is considered to figure out the optimal length of the exterior horizontal shading devices that maximizes efficiency. Result: As a result, the proper length and shape of the exterior horizontal shading devices are provided as follows: 1) Energy consumption in cooling and heating is minimized when the exterior horizontal shading devices are designed as 0.5m*2. 2) Electricity bill is the lowest when the exterior horizontal shading devices are designed as 3.3m*2. The gap between maximum and minimum electricity bill is about 7.8~14%.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.901-905
• /
• 2010

PV module has many power loss factors, and series resistance is the most important elements of them. It is therefore easy to expect the partial shading decrease the lifetime of the semiconductor depletion layer in thin film PV module. Different shading losses could be related with the hot spot which is critical in expecting the reliability issue. In this paper we have modelled the series resistance of the PV module with both different direction of the cell line and shading area of the panel. From the results, thin film a-Si PV module has shown different properties by shading direction.

• 한국태양에너지학회 논문집
• /
• 제36권4호
• /
• pp.41-47
• /
• 2016

A bypass diode is connected in parallel to solar cells with opposite polarity. The advantage of using the bypass diode is circumvented a destructive efforts of hot-spot heating in the photovoltaic(PV) module. In addition, it is possible to reduce a energy loss under the partial shading on the PV module. This paper presents a characteristic of photovoltaic module under partial shading condition and with defective bypass diode by using the experimental data. The results of field testing for each photovoltaic modules, when photovoltaic system which is connected power grid is operating, the inner junction-box temperature of shading photovoltaic module is high $5^{\circ}C$ because of difference of flowing current through into bypass diode. And incase of not operating photovoltaic system, the inner junction-box temperature of module with defective bypass diode is greatly higher than partial shading PV module.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.407-407
• /
• 2011

태양전지에서 Fill Factor를 저하시키는 직렬저항의 성분들은 베이스저항, 에미터 저항, contact 저항, finger 저항, busbar 저항 등이 있다. 각각의 저항 성분은 전극의 width및 height, 그리고 전극과 전극 사이의 spacing을 가변함에 따라 각기 다른 값을 나타내는데, 낮은 직렬저항 값을 달성하기 위해 전극의 면적을 크게 하는 것이 바람직하지만, 이는 cell의 shading loss를 증가시켜 cell의 JSC를 저하시킨다. 그러므로 cell의 면적과 전면 에미터의 면저항을 고려하여 shading loss와 직렬저항을 최소화 하는 최적의 전면 전극의 설계가 중요하다. 본 논문에서는 시뮬레이션을 통해 전면 전극의 height, spacing 및 width를 가변하여 1 by 1, 2 by 2, 3 by 3의 cell 면적에서의 전면 전극의 설계를 최적화 하였다. 시뮬레이션 결과 각각의 cell면적에서 단위면적당 저항 값이 500 $m{\Omega}$ 이하, shading loss가 4% 미만인 전극을 설계하였다.

• 한국식품저장유통학회지
• /
• 제8권4호
• /
• pp.362-366
• /
• 2001

양파를 간이저장 할 때 발생하는 부패 및 변색구에 의한 상품성 저하를 감소시킬 목적으로 무차광. 55% 차광 및 95%차광을 처리하여 시험한 결과는 다음과 같다. 1. 평균온도는 무차광에 비해 15%차광에서 1.0~2.9$^{\circ}C$가 낮았고, 95%차광에서는 2.0~3.8$^{\circ}C$가 낮았으며, 상대 습도는 차광정도가 높을수록 약간 높았다. 2. 처리별 조도 및 색도는 차광정도가 높을수록 낮았고, 저장 21일 후 변색구 발생율은 무차광 90.0%애 비해 55%차광 35.7%, 95%차광 13.3%로 차광처리에서 훨씬 적었다. 3. 부패율은 무차광 28.9%에 비해 95%차광 26.5%, 55% 차광 25.4%로 차광처리에서 적었고, 중량감모도 차광처리에서 적었다.

• 한국태양에너지학회 논문집
• /
• 제30권6호
• /
• pp.102-107
• /
• 2010

a-Si solar cell has relatively dominant drift current when compared with crystalline solar cell due to the high internal electric field. Such drift current make an impact on the PV module in the local shading. In this paper, the a-Si PV module output characteristics of shading effects was approached in terms of process condition, because of the different deposition layer of thin film lead to rising the resistance. We suggested design condition to ensure the long-term durability of the module with regard to the degradation factors such as hot spot by analyzing the module specification. The result shows a remarkable difference on module uniformity for each shading position. In addition, the unbalanced power loss due to power mismatch of each module could intensify the degradation.