• Journal of the Korea Fashion and Costume Design Association
• /
• v.9 no.3
• /
• pp.47-57
• /
• 2007

This study focused on the properties natural dyeing and natural material and on the development of functional material for well-being in apparel industry. Comus officinalis Siebold et Zuccarini is used as natural dyeing material which had been reported that have curable effect for unbalanced immunity, geriatric diseases like urinary tract system, diabetes, hypertension, arthritis, tinnitus, hyperhidrosis and women's diseases like hypermenorrhea. And this material also has anti-cancer effect so that can restraint cancer cells. 3 kinds tester of cotton, wool and silk are dyed by boiled with each dye (flower, fruits, bark of tree) as first dyeing and dried in the shade. These testers are done by post-mordanting method. Aluminium Potassium(Alk(SO4)2), Cuprie Sulfate($CuSO4{\cdot}5H2O$), Stannous Chloride($SnCl2{\cdot}2H2O$), Ferrous Sulfate($FeCl2{\cdot}4H2O$), Titanium Sulfate 24% aqueous solution(Ti(SO4)2) are used as mordants. Dyeing results of Comus officinalis Siebold et Zuccarini flower and bark are shown as yellow color series. And dyeing result of fruits is pink color series. Silk shows the best dyeing property. As the point of view for dyeing property, Ti, Sn, Fe would be the properchoice for mordant. Following results are extracted in this study. Yellow color is resulted in dyeing with Cornus officinalis flower as non-mordanting condition. Yellowish red color is come from dyeing with Comus officinalis fruit as non-mordanting condition. Grayish yellow tone is resulted in dyeing with bark as non-mordanting condition. Orange tone color with Ti-mordanting, green tone color with Sn-mordanting and gray tone color with Fe-mordanting is resulted respectively. However light-fastness of Comus officinalis(flower, fruit, bark) is very low as 1 or 2 level in non-mordanting condition, Comus officinalis flower dyeing is turned out 3 or 4 level and fruit dyeing is 4 or 5 level, bark dyeing is 2 or 3 level with Ti-mordanting respectively. Eventually Comus officinalis fruit has the best light-colorfastness property among all of dyes. dry cleaning colorfastness of Cornus officinalis(flower, fruit, bark) is good as 4 or 5 level in Ti-mordanting condition, perspiration-colorfastness of Cornus officinalis(flower, fruit, bark) is good as 4 or 5 level in Ti-mordanting condition, With these results, this study could conclude that dye-ability, colorfastness problem is getting better after mordanting process and practical usage would be possible.

• Animal Bioscience
• /
• v.35 no.12
• /
• pp.1967-1976
• /
• 2022

Objective: The aim of this study was to characterize the fecal microbiota of broiler chickens reared in the presence of different shades of light-emitting diode (LED) lights, correlating this information with biochemical and molecular evidence that allowed drawing conclusions on the state of health of the animals. Methods: Overall, the metagenomic approach on fecal samples was associated with evaluations on enzymes involved in the cellular response to oxidative stress: glutathione peroxidase (GPX), superoxide dismutase and catalase; while the inflammatory aspect was studied through the dosage of a proinflammatory cytokine, the interleukin 6 (IL-6), and the evaluation of the matrix metalloproteinases 2 (MMP-2) and 9 (MMP-9). Specifically, analysis was performed on distinct groups of chickens respectively raised in the presence of neutral (K = 3,300 to 3,700), cool (K = 5,500 to 6,000), and warm (K = 3,000 to 2,500) LED lightings, and a direct comparison was performed with animals reared with traditional neon lights. Results: The metagenomic analysis highlighted the presence of two most abundant bacterial phyla, the Firmicutes and the Bacteroidetes, with the latter characterized by a greater relative abundance (p<0.05) in the group of animals reared with Neutral LED light. The analysis on the enzymes involved in the antioxidant response showed an effect of the LED light, regardless of the applied shade, of reducing the expression of GPX (p<0.01), although this parameter is not correlated to an effective reduction in the tissue amount of the enzyme. Regarding the inflammatory state, no differences associated with IL-6 and MMP-9 were found; however, is noteworthy the significant reduction of MMP-2 activity in tissue samples obtained from animals subjected to illumination with neutral LED light. Conclusion: This evidence, combined with the metagenomic findings, supports a potential positive effect of neutral LED lighting on animal welfare, although these considerations must be reflected in more targeted biochemical evaluations.

• Journal of the Korean Society of Costume
• /
• v.14
• /
• pp.145-165
• /
• 1990

This study examine closely conditions of costume between the Modernized period and Liberation with newspaper materials. Because newspaper generally appear society conditions in those days on rapid and across-the boad basis. The Modernized period is extremely change among history of costum (ordinance prohibiting top knots, allowance of foreign clothes putting on). Because this change have been spontaneously not by internal desired but Western input by the strong nation of imperialism to enclose Chosun, they was accepted by the general public later under the rule of Japaneses Imperialism. Consequently, study of costume play an important part periods between the Japanese annexation of Korea and Liberation. This study apply to newspaper characteric for costume, and closely examine an important costum condition of those days next time, and present costume material in those days that composed the account catalog appeared periods between the first publication(1920) of the Dong A II Bo, and in the year 1945, it is as follows. 1. Foreign clothes of men generally accept the general public on look at from form change, in the 1920's had come short Jackets and narrow throusers into fashion, in the 1930's had come trousers of generous waist band with broads shoulder and long Jackets. Catalog of Major clothes is as follows; Spring coat, Jacket, Vest, Shirt, etc. While pants had come trousers into fashion 2. Functional characteric of Foreign clothes was the possible acceptance of women's foreign clothes. It relate with much discussion to improve Korean development in those days and substitute foreign clothes for Korean clothes because of institence in those days to improve functional clothes life. 3. An improvement women's Korean clothes generally take aim at women's nipple liberation, substitute vest waist for skirt waist, appear seamless one-piece skirt of shade length, and long dress length of Jacket. 4. Children's clothes give an account of functional and sanitary conditions, handling method, washing method. 5. Clothes materials give account of foreign clothes material, artificial silk, furs, cotton fabrics, and etc. 6. Clothes management give an account of washing, keeping method, washing method of foreign clothes, and keeping of furs. 7. The hair generaly had come short hair into fashion in men's case, while accounts on long hair fashion of foreign nation effect in case of women. 8. Describing on beauty care manage primary beauty care, reform, plastic operation, and shade beauty care. Ideal beauty care deal with natural and dignified buauty care. 9. Accesaries (hat, handbag, handkerchief, gloves) change with fashion of clothes, it rapid more than clothes fashion. 10. On encouragement of abolition of white clothes and putting on dyeing clothes, because of economic defect of white clothes, psychology and beauty consequently, white clothes is on the rise abolition. In national level almost substitute dyeing clothes for control and improvement of people of all social standings consequently, dress and its ornaments conditions in those days analyzed account of Dong-A II Bo accept the foreign clothes that introduced internal country of the whole century, and substitute dyeing for white clothes. Costume condition in those days appear the mixed conditions of Korean clothes and Foreign clothes. In the 1920's is the first consideration dress and its ornaments form of Korean clothes. As later goes on foreign is given much weight in the whole clothes life. Account of foreign clothes managemental ways appear in the 1920's, while those facts prove the point that appeared the account that always dealed with concrete content of foreign fashion in the 1930's.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.504-509
• /
• 2015

This research carried out to figure out the effect of the green manure crop cultivated at a preparation field and the shading net on the growth, development, and quality of ginseng. Followings are results obtained from the research. Leaf width of ginseng under the shading net of a two-layered blue and two-layered black polythylene net (TBTBPN) was good at rye and hairy vetch cultured group. Leaf length of ginseng under the shading net of a three-layered blue and one-layered black polyethylene net (TBOBPN) was good at barley and hairy vetch cultured group. Meanwhile, leaf width was good at hairy vetch cultured group. Leaf length of ginseng under a blue polyethylene sheet (BPS) was good at a barley and barley + hairy vetch cultured group, but stem length was shorter compare to other shading net cultivations. Root weight of ginseng was good under the shading net of a two-layered blue and two-layered black polyethylene net (TBTBPN) at a rye and hairy vetch cultured group, and was good under the shading net of a three-layered blue and onelayered black polyethylene net (TBOBPN) at a barley + hairy vetch cultured group, but there was no significant difference under blackout screen according to manure crop varieties. Ratio of rusty root was 10.2% at the barley cultured group under the shading net of a two-layered blue and two-layered black polyethylene net (TBTBPN), and was 23.1% at hairy vetch cultured group under shading net of a three-layered blue and one-layered black polyethylene net (TBOBPN). Ratio of rusty root was the lowest at a rye cultured group regardless the shading nets. Content of the ginsenoside was the highest at the rye cultured group under the shading net of two-layered blue and two-layered black polyethylene net (TBTBPN), was the highest at the barley cultured group under the shading net of a three-layered blue and one-layered black polyethylene net (TBOBPN), and was the highest at the rye cultured group under the blackout screen.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.377-384
• /
• 2007

Present tooth bonding system can be categorized into total etching bonding system (TE) and self-etching boding system (SE) based on their way of smear layer treatment. The purposes of this study were to compare the effectiveness between these two systems and to evaluate the effect of number of themocycling on microleakage of class V composite resin restorations. Total forty class V cavities were prepared on the single-rooted bovine teeth and were randomly divided into four experimental groups: two kinds of bonding system and another two kinds of thermocycling groups. Half of the cavities were filed with Z250 following the use of TE system, Single Bond and another twenty cavities were filled with Metafil and AQ Bond, SE system. All composite restoratives were cured using light curing unit (XL2500, 3M ESPE, St. Paul, MN, USA) for 40 seconds with a light intensity of $600mW/cm^2$. Teeth were stored in distilled water for one day at room temperature and were finished and polished with Sof-Lex system. Half of teeth were thermocycled 500 times and the other half were thermocycled 5,000 times between $5^{\circ}C$ and $55^{\circ}C$ for 30 second at each temperature. Teeth were isolated with two layers of nail varnish except the restoration surface and 1 mm surrounding margins. Electrical conductivity (${\mu}A$) was recorded in distilled water by electrochemical method. Microleakage scores were compared and analyzed using two-way ANOVA at 95% level. From this study, following results were obtained: There was no interaction between variables of bonding system and number of thermocycling (p = 0.485). Microleakage was not affected by the number of thermocycling either (p = 0.814). However, Composite restoration of Metafil and AQ Bond, SE bond system showed less microleakage than composite restoration of Z250 and Single Bond, TE bond system (p = 0.005).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.2
• /
• pp.126-130
• /
• 1985

Photoinhibition studies were conducted with ginseng (Panax ginseng) grown under shade and tobacco (N. tobaccum cv. Bulgaria) grown under full sunlight. The plants were exposed to light intensity of 580, 1280, 1770, 2580 ${\mu}$E/㎡/sec in normal air for 3.6 9 hours. Light saturation of ginseng was observed at 550 ${\mu}$E/㎡/sec and that of tobacco was at 1600 ${\mu}$E/㎡/sec. Tobacco exposed to high light intensity and long duration of light irradiation didn't show entire reduction in photosynthetic capacity. But in ginseng, 20.3% of photosynthesis was reduced in light intensity of 2,580 ${\mu}$E/㎡/sec during 9 hours. Light response in photosynthesis differed considerably between tobacco and ginseng, and ginseng exposed to high light intensity showed remarkable reduction in photosynthesis. The extent of photoinhibition of ginseng was dependent on the length of exposure to the high light intensity. Stomatal resistance of ginseng seemed not to be changed by photoinhibition but mesophyll resistance was increased.

• Journal of Technologic Dentistry
• /
• v.31 no.1
• /
• pp.23-36
• /
• 2009

The goal of esthetic restoration is to achieve morphologic, optical, and biologic acceptance. Creation of a natural looking ceramic restoration, which blends harmoniously with surrounding dentition, is not always achieved. A successful color match is an important aspect of any esthetic dental restoration. Since natural enamel has inherent translucency, it is important that ceramic restorations reproduce the translucency and color of the natural teeth. However, the final color match of porcelain crowns to adjacent natural dentition remains some problem. Difficulties related to color matching arise from the structural differences that exist between metal ceramic crowns and natural teeth, the limited range of available ceramic shades, inadequate shade guides, different types of metal alloys, repeated firing, the condensation technique, and varying compositions of ceramic materials. Many factors contribute to the esthetic success of dental restoration: optical properties such as color and its elements of hue, value, and chroma; translucency and opacity; light transmission and scattering; and metamerism and fluorescence. The purpose of this study was to determine the color changes of metal-ceramic system with different veneering porcelain powder after repeated firing. The objectives of this in vitro study were to measure the lightness($L^*$), chromaticity($a^*$), chromaticity($b^*$), chroma($C^*$), hue(h), reflectance(%), color difference(${\Delta}E$). The following conclusions were obtained: 1. An increase in the number of firings resulted in decrease in lightness($L^*$) but increase in chromacticity($a^*$) with all porcelain. After the second sintering resulted in decrease in chromacticity($b^*$) with opaque-dentin porcelain and dentin porcelain but in increase with enamel porcelain and translucency porcelain. And after the second sintering resulted in decrease in chroma($C^*$) with opaque-dentin porcelain and dentin porcelain, but on the whole side in decrease with enamel porcelain and translucency porcelain. 2. After the second firing, a increase in the number of firings resulted in decrease reflectance(%) in all wavelength. 3. There were noticeable color differences(${\Delta}E$) between first sintering and multiple firings(dentin porcelain: 5.29~8.15, opaque-dentin porcelain: 4.83~8.2, enamel porcelain: 8.93~13.15, translucency porcelain: 9.37~12.91), but the color difference(${\Delta}E$) after second sintering were down to 4.87 in all porcelain. 4. Given the NBS Criteria, a 'trace' was not found this study but a 'slight' was found 2-3, 3-5 in dentin porcelain, 2-3 in opaque-dentin porcelain, 3-5, 5-10 in enamel porcelain and translucency porcelain, a 'noticeable' was 2-5, 3-10, 5-10 in dentin porcelain and opaque-dentin porcelain, 2-3, 2-5, 3-10 in enamel porcelain 2-3, 3-10 in translucency porcelain, an 'appreciable' was 1-2, 1-3, 2-10 in dentin porcelain 1-2, 1-3, 2-10, 3-10 in opaque-dentin porcelain, 2-10 in enamel porcelain, 2-5, 2-10 in translucency porcelain, a 'much' was 1-5, 1-10 in dentin porcelain and opaque-dentin porcelain, 1-2, 1-3, 1-5 in enamel porcelain 1-2, 1-3, 1-5, 1-10 in translucency porcelain, a 'very much' was 1-10 in enamel porcelain.

• Journal of Environmental Policy
• /
• v.12 no.4
• /
• pp.119-132
• /
• 2013

Hosta longipes is one of the most popular ornamental perennials in use in Korea today, and is mainly used as a groundcover plant in urban shaded places. In this study, the pytoremediation effect of Hosta longipes was tested using four concentrations (Control, 100, 250 and $500mg{\cdot}kg^{-1}$) of Cd, Pb and Zn in soil. The plants were planted in $300mm{\times}200mm{\times}250mm$ drainless-containers, which were filled with a artificial amended soil for 7 months. The results showed that the contents of heavy metals cadmium and lead in the shoot of Hosta longipes increased with increasing heavy metal concentration levels exception of zinc. The amount of zinc, cadmium, and lead accumulated in roots were increased with heavy metal concentration levels up in soil. The shoot/root ratios(TF; translocation factor) values were found to be more than 80% of total Zn, Cd, and Pb take up by Hosta longipes. These results indicated that root is the major part for accumulation of heavy metal. The removal contents of zinc, cadmium, and lead increased significantly with the increasing heavy metal concentration in the soil, which was planted with Hosta longipes. The heavy metal concentration accumulation in plant/soil ratios (BF; bioaccumulation factor) values for three metals were found to be more than 30% in cadmium and lead, but lower in zinc treatments. The different responses of Hosta longipes suggest that in heavy metal contaminated soils the plant adsorbs available metals depending on the concentration soils in which they are present. Therefore, this species can be an efficient phytoremediator for soils contaminated with cadmium and lead in urban shaded places.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.12
• /
• pp.1754-1760
• /
• 2007

To improve poor dye uptake of safflower yellow colorants, cellulose fibers were pretreated with chitosan. The effect of chitosan pretreatment on the dyeability of safflower yellow colorants to cotton, ramie, and rayon was investigated in terms of dye uptake, color, and colorfastness. Irrespective of fiber types, dye uptake increased continuously with increase in chitosan concentration. Chitosan pretreatment improved dye uptake up to 5.6 times for cotton, 7.2 times for ramie, and 3.7 times for rayon. For cotton and ramie, the shade of dyed fabric changed YR color to Y color with increase in chitosan concentration. Dyed rayon fabrics showed Y color irrespective of chitosan concentration. Shades got darker and deeper with increasing chitosan concentration. Shades of chitosan pretreated fabrics were shifted differently depending on dyeing temperature within same fabrics. In common, the color of all dyed fabrics changed to YR at 50 and $70^{\circ}C$ while Y color at 30 and $90^{\circ}C$. V and C value decreased with increase in dyeing temperature and resulted in darker and duller color, in general. Light fastness was fair while washing fastness was poor. It was confirmed that ultrasonic dyeing method enhanced dye uptake more than 30% for cotton and ramie fabrics compared to the conventional automatic machine dyeing method. However, no difference in dye uptake between two dyeing methods was found for rayon.

• Journal of Bio-Environment Control
• /
• v.17 no.1
• /
• pp.9-13
• /
• 2008

The wasabi was planted in glasshouse to investigate the effect shade level (0, 10, 30, 70%) on growth and photosynthetic response. The net photosynthetic rate and stomatal conductance were the highest under 10% shading rate in greenhouse. The lowest transpiration rate was in the non-shading treatment. 70% shading rate significantly reduced in photosynthetic characteristics. The number of leaf was decreased with increasing of shading rate. Leaf and petiole weight was the highest 10% shading and then followed by the non-shading treatment. Number of leaves, leaf, petiole and total weight were severely declined in 70% shading treatment. Shading rate (0%, 10%, and 30%) did not significantly influenced on the leaf length, leaf width and root growth. 10% shading level was the most effective for wasabi leaf production in hydroponics.