• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.128-137
• /
• 2020

Over the last 30 years, the use of chairside computer-aided design (CAD) and computer-aided manufacturing (CAM) systems has evolved and has become increasingly popular in dentistry. Although CAD/CAM restorations have been used in the anterior dentition, satisfying the esthetic requirements of clinicians and patients, where the restorations are limited to the chairside, remains a challenge. To reproduce multi-shades of CAD/CAM restorations in the clinic, a preliminary experiment to express several shades on A2 lithium disilicate (LS2) blocks using a staining kit was performed. After measurement of the CIE L^*a^*b^* value of specimens, it was compared with that of the commercial shade guide. This report presents two cases with individual customization of shade and surface characterization of the CAD/CAM restorations using predictable methods based on the preliminary experimental data. The anatomical shape of restoration was obtained from 'copy and paste technique' and 'mirror image acquisition technique'. All treatment procedures and fabrication of restorations performed in this report were executed in the clinic itself.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.7 no.1
• /
• pp.28-31
• /
• 1998

It is difficult to make an artificial central incisor similar to natural tooth. All ceramic porcelain of this patient is not esthetic, and there is gingival recession due to ill-fitted margin. She has class II division 1 occlusion, so upper central incisors is labioversed. Upper light central incisor is well-characterized but the yellowish brown color of dentin is appeared on the incisal third portion of the central incisor. At 1st trial, the shape and characterization of restoration is good but shade is little dark. At 2nd trial, the shape is better but patient complained on black triangle of mid interdental space, so mesiocervical portion of restoration is overcontoured to compromise the black triangle. Completed metal ceramic crown is in harmony with the adjacent central incisor in aspect of shape, shade, and characterization.

• Korean Journal of Materials Research
• /
• v.26 no.8
• /
• pp.422-426
• /
• 2016

With the increase in installed solar energy capacity, comparison and analysis of the physical property values of solar cells are becoming increasingly important for production. Therefore, research on determining the physical characteristic values of solar cells is being actively pursued. In this study, a diode equation, which is commonly used to describe the I-V behavior and determine the electrical characteristic values of solar cells, was applied. Using this method, it is possible to determine the diode ideality factor (n) and series resistance ($R_s$) based on light I-V measurements. Thus, using a commercial screen-printed solar cell and an interdigitated back-contact solar cell, we determined the ideality factor (n) and series resistance ($R_s$) with a modified diode equation method for the light I-V curves. We also used the sun-shade method to determine the ideality factor (n) and series resistance ($R_s$) of the samples. The values determined using the two methods were similar. However, given the error in the sun-shade method, the diode equation is considered more useful than the sun-shade method for analyzing the electrical characteristics because it determines the ideality factor (n) and series resistance ($R_s$) based on the light I-V curves.

• Journal of Korean Society of Forest Science
• /
• v.94 no.4 s.161
• /
• pp.236-242
• /
• 2005

Phytochrome B (PhyB) gene, which is a photoreceptor that controls plant growth under various light conditions, was cloned from Chinese hybrid poplar 'Soohang 1'. Nucleotide sequence and deduced amino acid sequences PhyB cDNA of 'Soohang' is consisted with 3,456 nucleotides and 1,156 amino acids. The cloned PhyB fragment showed 98% homology of amino acid sequences with Populus balsamifera PhyB1. According to Northern blot analysis. PhyB was up-regulated by light, while PhyB transcript was not detected under dark condition. According to this study, the cloned PhyB is induced by light and functions as photoreceptor.

• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.588-592
• /
• 2014

A new Saxifraga fortunei cultivar 'Whitegreen' was bred by crossing between 'Daewoojoo' with Pale Green (Y-G145-C) colored petals and 'Kwanglim' with light Yellow green (Y-G145A) colored petals. The selection and flower characterization were conducted from 2004 to 2008 in greenhouse of Highland Agriculture Research Center, NICS, RDA. Flowering in 'Whitegreen' Showed from September 20 th for 33 days. The number of petals were 11.4 ea., with a width of 1.4 cm and length of 1.4 cm. The plant height was 20.7 cm, and number of leaves per plant was 48.3 ea., with a width of 3.4 cm and length of 3.0 cm. 'Whitegreen' cultivar can be used as a pot flower. 'Whitegreen' plants grown under 50% shade of sunlight have higher degree of acclimation compared to those under direct sunlight. And soft rot disease would occur usually by over-irrigation. 'Whitegreen' cultivar was registered as a novel variety with No. 3456 in Korea seed and variety service on April 2011.

• Korean Journal of Materials Research
• /
• v.25 no.4
• /
• pp.196-201
• /
• 2015

This paper presents the impact of partial shading on $CuIn_xGa_{(1-x)}Se_2(CIGS)$ photovoltaic(PV) modules with bypass diodes. When the CIGS PV modules were partially shaded, the modules were under conditions of partial reverse bias. We investigated the characterization of the bypass diode and solar cell properties of the CIGS PV modules when these was partially shaded, comparing the results with those for a crystalline silicon module. In crystalline silicon modules, the bypass diode was operated at a partial shade modules of 1.67 % shading. This protected the crystalline silicon module from hot spot damage. In CIGS thin film modules, on the other hand, the bypass diode was not operated before 20 % shading. This caused damage because of hotspots, which occurred as wormlike defects in the CIGS thin film module. Moreover, the bypass diode adapted to the CIGS thin film module was operated fully at 60% shading, while the CIGS thin film module was not operated under these conditions. It is known that the bypass diode adapted to the CIGS thin film module operated more slowly than that of the crystalline silicon module; this bypass diode also failed to protect the module from damage. This was because of the reverse saturation current of the CIGS thin film, $1.99{\times}10^{-5}A/cm^2$, which was higher than that of crystalline silicon, $8.11{\times}10^{-7}A/cm^2$.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.361-365
• /
• 2013

To investigate factors determining peach fruit quality, chlorophyll content by leaf positions, chlorophyll content of foliated leaf, change of leaf area, and photosynthetic capacity were monitored. Photosynthetic rate in response to radiation intensity and $CO_2$ concentration, and change of sucrose content after shading treatment also were investigated. Chlorophyll content was similar in $5-12^{th}$ leaves after 10 days of foliation, while young $13-16^{th}$ leaves showed lower chlorophyll contents. Chlorophyll content was 2.56 ${\mu}g/cm^2$ on May $28^{th}$, just after foliation, and rapidly increased up to 6.35 ${\mu}g/cm^2$ on June $12^{th}$. After this point, chlorophyll content gradually increased during two months showing the highest value of 9.03 ${\mu}g/cm^2$ on August $14^{th}$. Leaf area was 27.1 $cm^2$ just after foliation and 37.7 $cm^2$ on $10^{th}$ day of foliation increasing 10.6 $cm^2$ during 10 days. Leaf area slowly increased by 3.9 $cm^2$ during next one month. Photosynthetic capacity increased rapidly until the $30^{th}$ day of foliation showing the highest capacity of 13.8 ${\mu}mol/m^{-2}/sec^{-1}$. After this point, photosynthetic capacity decreased sharply. Photosynthetic rate in response to radiation intensity increased rapidly until the PPFD reached to 600 ${\mu}mol/m^{-2}/sec^{-1}$ and increased gradually from 600 ${\mu}mol/m^{-2}/sec^{-1}$ to 1200 ${\mu}mol/m^{-2}/sec^{-1}$ of PPFD and stayed stable beyond this point. Photosynthetic rate in response to $CO_2$ concentration increased until 600 ppm of $CO_2$. At higher $CO_2$ concentration, photosynthetic rate stayed stable or decreased. Sucrose content in leaves was not significantly different between control and shading group until one hour of shading treatment while decreased in shading group after two hours of treatment.