• 한국지반환경공학회 논문집
• /
• 제14권11호
• /
• pp.33-46
• /
• 2013

본 연구는 최근 기상이변의 영향으로 활발히 진행 중인 댐 치수능력사업의 일환으로, 운영 중인 콘크리트 표면차수벽형석괴댐(Concrete Face Rockfill Dam, CFRD)에서 측정된 계측결과와 시간 의존적 점탄성모델인 Kelvin 모델을 회귀분석하여 댐완공 이후 추가적인 하중증가 없이도 발생되고 있는 크리프(Creep)와 같은 댐의 장기 변형특성을 예측하고, 이와 같은 댐의 변형특성이 댐 제체를 구성하는 재료의 물리적 특성치(E, G, K) 변화에 미치는 영향을 분석하였다. 또한 댐의 장기적인 변형거동에 따른 물리적 특성치 변화가 댐 안정성에 미치는 영향과 댐 증고 시 댐의 장기적인 안정성 확보를 위한 합리적인 댐 안정성 평가방법을 제시하였다.

• 한국지반신소재학회논문집
• /
• 제5권1호
• /
• pp.9-14
• /
• 2006

국내에서는 여러 가지 형상 및 친환경적인 보강토옹벽 구조물의 시공은 최근 많이 확대되고 있다. 전체구조물의 안정과 더불어 블록에 발생되는 균열은 대부분 원인으로 기초의 침하에 의한 경우가 많다. 본 연구에서는 기초지반의 부등침하와 관련하여 기초지지력의 설계시 평가법 및 시공시 평가법에 대하여 고찰하였다. 현장에서 실시되고 있는 실제 시공사례를 이용하여 보강토옹벽의 안정을 기초지지력을 만족하지 못하는 경우에 대한 대책방안을 제시하고 그 방안의 활용성을 제시하였다. 보강토옹벽의 기초부분은 전체사면의 잠재적 활동면의 범주내에 있게 되므로 기초지지력을 담당하는 지반은 지반의 활동저항력에 영향을 받게 된다. 따라서, 기초지지력을 부담하는 기초지반은 지지력에 대한 안정을 만족할 뿐 만 아니라 전체사면활동에 저항하는 억지능력에 대하여도 고려되어야 한다.

• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7949-7956
• /
• 2015

본 논문에서는 뒤채움을 선 시공하고, 교대를 후 시공하여 침하와 교대 수평 토압 및 변위를 저감할 수 있는 경제적인 교대 구조인 RAR(Reinforced Abutment for Railroads)을 제시하고 수치해석으로 성능을 확인하였다. 먼저 유한요소 해석 프로그램을 이용하여 기존교대에서 발생하는 접속부의 침하와 교대 수평변위를 다양한 높이와 원지반 조건에 대하여 해석하였다. 이 후 보다 경제적인 설계를 위하여 교대 단면과 말뚝 기초수를 저감시킨 RAR에 대해 동일한 조건으로 해석을 수행하고 그 결과를 비교, 분석하였다. 분석 결과 RAR에서 발생하는 접속부 침하와 교대 수평변위는 기존교대의 20%와 34% 수준이며, 이는 뒤채움 안정화의 효과에 의한 것으로 나타났다. RAR은 침하와 수평변위 제어 및 토압 재분배 효과를 통하여 교대 저판, 교대벽체, 교대 기초 말뚝 수 저감으로 기존 교대 보다 경제적인 시공이 가능할 것으로 예상된다.

• 한국지반공학회논문집
• /
• 제24권1호
• /
• pp.61-70
• /
• 2008

지표면 침하량, 침하 기울기 그리고 터널주변의 지반 변위에 대한 관리와 예측은 도심지 저토피 터널의 설계와 시공에서 주요한 인자가 된다. 저토피 터널에서의 굴착에 따른 변형 해석은 터널 측벽부에서 지표부까지 발달하는 전단대의 변형특성을 파악하는 것이 중요하다. 본 연구는 2차원 실내 터널 모형실험과 전단 탄성계수 및 강도 정수의 저하를 고려한 변형률 연화모델 해석을 통하여 미고결 저토피 터널에서의 굴착으로 인한 변형 거동 특성을 규명해 보았다. 변형률 연화모델을 이용한 수치해석과 모형 터널 실험과의 비교에서 지표면 침하, 천단침하 그리고 전단대의 발달형태에서 부합되는 결과가 나타났다. 본 연구에서 변형률 연화모델은 저토피 터널의 비선형 변형해석에 대하여 적용성이 있음을 알 수 있었다.

• Geomechanics and Engineering
• /
• 제31권1호
• /
• pp.1-14
• /
• 2022

Urban deep excavation will affect greatly on the deformation of adjacent existing buildings, especially those with shallow foundations. Isolation piles has been widely used in engineering to control the deformation of buildings adjacent to the excavation, but its applicability is still controversial. Based on a typical engineering, numerical calculation models were established and verified through monitoring data to study the influence characteristics of isolation piles on the deformation of existing shallow foundation buildings. Results reveal that adjacent buildings will increase building settlement δ_v and the deformation of diaphragm walls δ_h, while the isolation piles can effectively decrease these. The surface settlement curve is changed from "groove" type to "double groove" type. Sufficiently long isolation pile can effectively decrease δ_v, while short isolation piles will lead to a negative effect. When the building is within the range of the maximum settlement location P, maximum building rotation θ_m will increase with the pile length L and the relative position between isolation pile and building d/D increase (d is the distance between piles and diaphragm walls, D is the distance between buildings and diaphragm walls), instead, θ_m will decrease for buildings outside the location P, and the optimum was obtained when d/D=0.7.

• Steel and Composite Structures
• /
• 제51권5호
• /
• pp.473-485
• /
• 2024

This paper proposes a composite form of fuzzy adaptive control plan based on a robust observer. The fuzzy 2D control gains are regulated by the parameters in the LMIs. Then, control and learning performance indices with weight matrices are constructed as the cost functions, which allows the regulation of the trade-off between the two performance by setting appropriate weight matrices. The design of 2D control gains is equivalent to the LMIs-constrained multi-objective optimization problem under dual performance indices. By using this proposed smart tracking design via fuzzy nonlinear criterion, the data link can be further extended. To evaluate the performance of the controller, the proposed controller was compared with other control technologies. This ensures the execution of the control program used to track position and trajectory in the presence of great model uncertainty and external disturbances. The performance of monitoring and control is verified by quantitative analysis. The goals of this paper are towards access to adequate, safe and affordable housing and basic services, promotion of inclusive and sustainable urbanization and participation, implementation of sustainable and disaster-resilient buildings, sustainable human settlement planning and manage. Therefore, the goal is believed to achieved in the near future by the ongoing development of AI and control theory.

• Journal of Biosystems Engineering
• /
• 제20권3호
• /
• pp.288-298
• /
• 1995

In greenhouse vegetable, the automatic control in cultivating environment has been projected as a national business ; especially a countermeasure against the settlement of UR negotiation. Because it makes possible to manage a large greenhouse with family-hands and to expect the betterment of quality and the increasement of harvest in crops. In the course of carrying the workout, however, there are many problems with the overall control system with computers as well as the individual systems for environment control because of hardware and software problems : especially the shortage of data for development of the system is most serious. Among the many problems for development of the automatic control system, the automations of irrigation, liquefied fertilizer and chemical solution, mixing and ventilation, etc and the development of the general automatic controller system for environment control in greenhouse are studied, which requires a lot of tabors. The results are summarized as follows ; 1. In moisture control by the soil moisture meter, the error was shown 10 % in the beginning irrigation point and 19 % in the stop irrigation point. 2. The supply of liquefied fertilizers with the irrigation system was excellent by setting the operating time and the mixing ratio. 3. The developed chemical spraying system was operated well, but not perfect in nozzle positions. 4. The cucumber was cultivated properly with the trickle irrigation system. 5. The developed controller for the automatic control system in greenhouse was remarkable in the part of hardware, but more researches are needed in the part of software.

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.187-201
• /
• 1994

For settlement of safety supervision and prevention agains industry's accident, first, it needs to design and manufacture for safety of machines and tools, second, it must safety foundation of machines and tolls and sticking of safety facilities, third, it must be wear of protective device in operations. Then it needs to fit countermeasure founding and continuous safety education and itself inspection control that analysis and study the point at issue of safety.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 봄 학술발표회 논문집
• /
• pp.83-88
• /
• 1994

The DDC(dynamic deep compection) was carried out the main method of ground improvement for construction of municipal high way. The project area is composed of the municipal waste dumped, demolished building debris, coal ash and industrial waste made between 1983 and 1989. From the result of fileld measurement, it was found that waste landfill was compressed considerably (15 ~ 20% of full depth), and the strength was increased satisfactorily(20 ~ 120% of original N-value, 55 ~ 230% of original dynamic cone penetration resistance). And the chemical inclination of the municipal waste landfill was analyzed for expection and control of settlement.

• Geomechanics and Engineering
• /
• 제20권4호
• /
• pp.313-322
• /
• 2020

This study focuses on a prediction approach of compaction compensation grouting efficiency in sandy soil. Based on Darcy's law, assuming that the grouting volume is equal to the volume of the compressed soil, a two-dimensional calculation model of the compaction compensation grouting efficiency was improved to three-dimensional, which established a dynamic relationship between the radius of the grout body and the grouting time. The effectiveness of this approach was verified by finite element analysis. The calculation results show that the grouting efficiency decreases with time and tends to be stable. Meanwhile, it also indicates that the decrease of grouting efficiency mainly occurs in the process of grouting and will continue to decline in a short time after the completion of grouting. The prediction three-dimensional model proposed in this paper effectively complements the dynamic relationship between grouting compaction radius and grouting time, which can more accurately evaluate the grouting efficiency. It is practically significant to ensure construction safety, control grouting process, and reduce the settlement induced by tunnel excavation.