• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2006년도 제5회 추계학술대회 및 정기총회
• /
• pp.135-140
• /
• 2006

• 전기의세계
• /
• 제20권5호
• /
• pp.19-22
• /
• 1971

This paper deals with the state-variable analysis of the arbitrary RLC lumped linear time-invariant networks. A formulation technique for determining a set of state equation using Bryant-Bashkow A Matrix and by means of the procedure setting up the terminal equation is discussed.

• 대한임상검사과학회지
• /
• 제53권2호
• /
• pp.199-200
• /
• 2021

• 한국산업보건학회지
• /
• 제5권2호
• /
• pp.193-199
• /
• 1995

This study was designed to investigate the difference of time weighted average(TWA) of noise levels and noise doses by the different operating parameter settings such as exchange rate, threshold level and criterion level for noise dosimeter in the field measurements of noise at industrial working environments. The time weighted averages of noise level and noise doses for noise working environments were determined by noise dosimeter on 80 workers employed at 20 industrial establishments of 8 industries. The results obtained were as follows: 1. The mean time weighted average(TWA) of the noise working environments by the operating parameter settings showed 93.4 dB(A) in 3 dB of exchange rate, 80 dB of threshold level and 90dB of criterion level 92.0 dB(A) in 3 dB-exchange rate, 90 dB-threshold level and 90 dB-criterion level, in 90.8 dB(A) in 5 dB of exchange rate, 80 dB of threshold level and 90 dB of criterion level, and 86.7 dB(A) in 5 dB of exchange rate, 90 dB of threshold level and 90dB of criterion level. 2. ln group of noise level less than 90 dB(A), mean TWAs of 80 dB of threshold level were significantly higher than that of 90 dB of threshold level in 3 dB and 5 dB of exchange rate. 3. The case exceeded threshold limit value of noise was 49(61.3 %) in 3dB, 80dB and 90 dB setting, 44(55.0 %) in 3 dB, 90 dB, 90 dB setting, 33(41.3 %) in 5 dB, 80dB, 90 dB setting and 26(32.5%) in 5 dB, 90 dB, 90 dB setting. Above considerations in mind, it is suggested that exchange rate and threshold level be specified in related laws and regulations in the evaluation of working environments noise.

• 한국정보시스템학회지:정보시스템연구
• /
• 제26권4호
• /
• pp.1-15
• /
• 2017

Purpose Through the provision of real time performance information about who is contributing and who is not in Electronic Brainstorming, prior studies evidenced a significant performance gain. However, it has been observed that the quantity-based performance feedback alone does not have enough restrictiveness to guide the performance behavior throughout the idea generation session. We included the notion of goal setting into the process performance feedback mechanism in an effort to regulate performance behavior and to better understand why individuals in Electronic Brainstorming are not obtaining enough stimulation benefits in the group interaction process. Design/methodology/approach We had developed real-time visual process performance feedback and modified to include goal setting. This mechanism visually displays individuals' performances two-dimensionally (quality for each idea vertically and quantity of ideas horizontally along with their goals). As individuals' contributions accumulate, the mechanism reveals performance histories by connecting the sequence of ideas in a time-series format, telling stories of individuals' performances. Then, we compared the performance outcome from this study with the outcomes from two prior studies (i.e., Jung et al., 2010 and Jung, 2014). Findings The results showed that the inclusion of goal setting into the process performance feedback solved the issue in the previous study. That was the lower than expected magnitude of performance enhancement of process performance feedback when compared to that of quantity-based feedback. It appears that goals as a motivational technique provide standards for systematic self-evaluation, serving as a cue to regulate performance behavior by strengthening the linkage between effort and performance. Thus, goals seem to set up a self-fulfilling prophecy, preconditioning better performance. However, the outcome still showed that its performance magnitude is unsatisfactory because the outcome of this study turned out to be close to the outcome of just quantity-based performance feedback in Jung et al.'s (2010) study.

• Computers and Concrete
• /
• 제22권2호
• /
• pp.153-159
• /
• 2018

Accelerators are used to speed up the construction by accelerating the setting time which helps in early removal of formwork thus leading to faster construction rate. Admixtures are used in mortar and concrete during or after mixing to improve certain properties of material which cannot be achieved in conventional cement mortar and concrete. The various industrial by products make nuisance and are hazardous to ecosystem as well. These wastes can be used in the construction industries to reduce the consumption of cement/aggregates, cost; and save the energy and environment by utilising waste and eliminate their disposal problem as well. The effect of calcium nitrate and triethanolamine (TEA) as accelerators and marble powder (MP) as waste material on the various properties of cement paste and mortar has been studied in the present work. The replacement ratio of MP was 0-10% @ 2.5% by weight of cement. The addition of calcium nitrate was 0% and 1%; and variation of addition of TEA was 0-0.1@ 0.025% and 0.1-1.0@ 0.1% by weight of cement. On the basis of setting time, some mix proportions were selected and further investigated. Setting time and soundness of cement paste; compressive strength and microstructure of mortar mix of selected mix proportions were studied experimentally at 3, 7 and 28 days aging. Results showed that use of MP, calcium nitrate, TEA and their combination reduced setting time of cement paste for all the mixes. Addition of calcium nitrate increased the compressive strength at all curing ages while MP and TEA decreased the compressive strength. The mechanism of additives was discussed through scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) analysis of the specimens.

• Steel and Composite Structures
• /
• 제46권5호
• /
• pp.689-707
• /
• 2023

Geopolymer concrete production is interesting as it is an alternative to portland cement concrete. However, workability, setting time and strength expectations limit the sustainable application of geopolymer concrete in practice. This study aims to improve the production of geopolymer concrete to mitigate these drawbacks. The improvement in the workability and setting time were achieved with the additional use of NaOH solution whereas an increase in the strength was gained with the addition of recycled steel fibers from waste tires. In addition, the use of 25% basalt powder instead of fly ash and the addition of recycled steel fibers from waste tires improved its environmental feature. The samples with steel fiber ratios ranging between 0.5% and 5% and basalt powder of 25%, 50% and 75% were tested under both compressive and flexure forces. The compressive and flexural capacities were significantly enhanced by utilizing recycled steel fibers from waste tires. However, decreases in these capacities were detected as the basalt powder ratio increased. In general, as the waste wire ratio increased, the compressive strength gradually increased. While the compressive strength of the reference sample was 26 MPa, when the wire ratio was 5%, the compressive strength increased up to 53 MPa. With the addition of 75% basalt powder, the compressive strength decreases by 60%, but when the 3% wire ratio is reached, the compressive strength is obtained as in the reference sample. In the sample group to which 25% basalt powder was added, the flexural strength increased by 97% when the waste wire addition rate was 5%. In addition, while the energy absorption capacity was 0.66 kN in the reference sample, it increased to 12.33 kN with the addition of 5% wire. The production phase revealed that basalt powder and waste steel wire had a significant impact on the workability and setting time. Furthermore, SEM analyses were performed.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.115-120
• /
• 2009

The studies for mechanical performance development have been examined to reduce energy consumption in building construction field. However, The energy consumption using in building for heating is impacted by not only system performance but also PMV particularly at temperature and clo. Most energy using in building part is mainly consumed for heating and cooling to keep comfort temperature. Heating energy consumption is bigger than cooling energy in Korea because of temperature difference in winter in comparison with summer at apartment building. This means that energy consumption can be changed by occupancy's comfort setting temperature in apartment building. This study evaluate actual comfort temperature range by clo and examined heating energy consumption by Esp-r and CO2 reduction possibility. The results show that keeping ASHRAE standards can reduce heating energy up to 23%; also, wearing underclothes with ASHRAE standard can reduce heating energy up to 47.8%. Option 4 showing Maximum CO2 emission reduction indicates that kerosene. LNG and electricity can reduce 1.5t, 1.7t, 2.46t respectively in comparison with option 2.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.3169-3175
• /
• 2014

본 연구에서는 상용 BIM툴에서 기본적으로 제공하는 물량산출 기능을 활용해 탄소배출량을 산정하는 BIM 라이브러리 구축과정을 정립하고 이를 철골조 건물에 적용함으로써 그 타당성을 검증하였다. BIM 라이브러리는 요구되는 부재별 탄소배출계수를 설정한 후 매개변수를 추출하고 Revit Architecture 2013을 활용해 프로젝트 단위 설정, 매개변수 설정, 탄소 배출량 산정식 설정의 절차를 거쳐 구축하였다. 이를 통해 철골부재의 단면종류별 탄소배출계수와 단면크기별 단위무게를 입력해주는 것만으로 별도의 수작업 없이 투입자재량에 따른 탄소배출량을 산정해 낼 수 있음을 확인하였다. 본 연구에서 제시한 BIM 라이브러리 구축과정을 통해 부재별 탄소배출량 산정 라이브러리를 구축함으로써 시공단계의 투입자재량에 따른 탄소배출량을 손쉽게 산정할 수 있으며, 프로젝트 초기 설계단계에서 탄소배출량을 최소화 할 수 있는 설계대안의 선택에 일조함으로써 친환경적 건설사업 수행 및 BIM의 실무적 활용성 향상에 도움을 줄 수 있을 것으로 기대된다.

• Journal of Information Technology Applications and Management
• /
• 제18권4호
• /
• pp.149-168
• /
• 2011

The current study initiated from an action-plan level perspective of revitalizing Green IT (Information Technology) in Korea by building a standardized national Green IT brand. In order to setting up a national level brand, there should be a big quantitative survey for identifying Green IT brand concepts. For this, the current study provides exploratory research results based on preliminary interviews and literature survey before the quantitative survey. The present article suggests a research framework and describes important factors for setting up a national level Green IT brand. In-depth interviews with panels were executed and existing Green IT brands in other countries are summarized and asked for evaluation to a small number of panels. The research results show that (1) National level Green IT brand should include wider concepts of IT, (2) Green IT brand will be more appealed by the public when it is simple, straightforward, and intuitive, (3) Earth, Tree, and/or Water show higher correlation with Green IT concepts. Green IT brand will offer marketing promotion effects to companies who adopt national level Green IT brand as well as increase public use of Green IT in daily life. For this reason, Green IT brand will be a win-win strategy and this should be cared and executed by the related government agencies with long term perspective.