• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.707-710
• /
• 2004

This paper reported the results of mock-up test on mass concrete for transfer girder using setting time difference of super retarding agent(SRA). According to test results, two mock-up structures were made. Plain concrete without placing layer reached maximum temperature after 24hours since placement and caused surface hydration cracks at top section. However, concrete with placing layer reached maximum temperature after 72hours and surface temperature was higher than center temperature, which did not cause surface crack. After form removing, no crack was observed at side surface of plain concrete, while concrete using SRA at mid section had surface scaling and settling crack. According to coring results, concrete with placing layer had a penetration crack from top section to bottom section. Therefore, the setting time difference method to reduce hydration heat will have difficulty in applying the mass concrete for transfer girder.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.331-332
• /
• 2010

본 연구에서는 등가재령에 의한 적산온도방법을 이용하여 혼화재를 치환한 시멘트 모르터의 응결시간을 예측하는 방법을 제시하였다. 혼화재치환에 따른 시멘트 모르터의 겉보기 활성화에너지를 등가재령식에 대입한 결과 양생온도별로 거의 유사한 값으로 나타나 응결시간 예측에 적산온도 개념의 적용이 적합한 방법인 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술논문발표회
• /
• pp.41-45
• /
• 2002

Placing lift is applied to place mass concrete in order to reduce thermal cracks by hydration heat. But they results in cold joint between placing lifts, which bring about the loss of strength, water tightness and undesirable appearance. Therefore, in this paper, mechanical and hydration heat of mass concrete using super retarding agent developed through previous study are investigated in order to reduce the hydration heat and place it without place lift. According to test results, placing lifts combined with normal concrete and concrete containing super retarding agent have positive effects on reducing hydration heat. Especially, the crack index by thermal stress of the concrete containing super retarding agent less than a quarter, compared to that of plain concrete without placing lifts, and less than a half, compared to that of plain concrete with placing lifts.

• 콘크리트학회지
• /
• 제28권2호
• /
• pp.71-74
• /
• 2016

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.267-270
• /
• 2003

This study is intended to investigate the engineering properties of concrete, in which cement and fine aggregate are replaced with cement kiln dust(CKD), such as the properties of fresh concrete and hardened concrete and hydration heat history, for effective using method of CKD, a by-product produced in the process of making cement. According to the results, as the replacing ratio of CKD increases, slump and air content of concrete decreases remarkably due to an increase of viscosity and filling of the pores. As the properties of setting, initial and final setting time are shortened with an increase of the replacing ratio of CKD, and as the replacement of CKD for fine aggregate increases, setting time is shortened more greatly. Compressive strength increases due to filling of the pores and reduction of air content in comparison with plain concrete. When the replacement ratio of CKD for cement is 10% and 15%, peak temperature of hydration heat lowers slightly, but it goes up in the case of replacement of CKD for fine aggregate. Also, when cement and fine aggregate is replaced with CKD by 2.5% and 7.5% respectively(1C3S) in the case of replacement of CKD for cement and fine aggregate, it is highest.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.238-239
• /
• 2019

In this study, it was intended to confirm the possibility of using the Durometer in estimating the setting time by comparing the Proctor penetration resistance with the Durometer type A of hardness in concrete substituting CBS Dust. With the hardness of Durometer type A, it is expected to be used conveniently in the field of practice as it is determined to be about 18 HD for the initial determination and 31 HD for the end measurement.

• Computers and Concrete
• /
• 제3권2_3호
• /
• pp.177-195
• /
• 2006

Slipforming is a construction method in which the forms move continuously during the placement of concrete. This paper presents the development of a computer aided program designated as "CADSLIPFORM" for slipforming operations. The program incorporates maturity methods for the prediction of initial setting times of slipform concrete layers using laboratory data (time-temperature histories and setting times of concrete mixtures at different temperatures) and generates slipform mock-up times. The performance of CADSLIPFORM is validated by comparing simulated mock-up times with those estimated in the field through conventional hard front by rod (R) method. Moreover, the program versatility is demonstrated by illustrating mock-up simulations for different cases with variable slipform parameters such as: number and thickness of concrete layers, concrete temperature (simulating variable setting times) and slipform speed. The program also incorporates the choice of Freiesleben Hansen & Pederson (FHP) and Carino & Tank (CT) maturity functions. CADSLIPFORM can assist user to develop reliable schedule of slipforming operation suitable for a specific project by optimizing various slipform parameters.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.631-634
• /
• 2005

This paper discussed the influence of addition of aqueous additives such as various beverage and detergent on the properties of concrete during placement by workmen's mistake. Slump and air content were not highly affected by the addition of aqueous additives, while addition of detergent led to an remarkable increase in air content due to interfacial activated ingredient in detergent. For setting time, lactic-acid fermented milk exhibited a longest setting delay and in order of coffee and soda. Concrete containing setting retarding beverage had higher compressive strength than control concrete at 7 and 28days. Concrete containing detergent exhibited strength loss due to the presence of larger amount of air content.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.261-264
• /
• 2003

Cold weather can lead to many problems in mixing, placing, setting time, and curing of concrete that can have harmful effects on its properties and service life. Korean Concrete Institute (KCI) defines cold weather as a period when the average daily air temperature is less $4^{\circ}C$ and recommends to cast concrete with special care such as shielding, heating and so on. The use of high early strength cements may improve the rate of hardening characteristics of concrete in cold weather by making it possible to achieve faster setting time and evolving more hydration heat than ordinary Portland cement. Higher early strength can be achieved using Type III cement especially during the first 7 days. The strength increase property of Type III cement at low temperature was studied. As a conclusion the heat or heat insulation curing period can be reduced to 50~75%. So, it can be used for cold weather concreting to reduce construction cost and extend the construction season.

• 대한토목학회논문집
• /
• 제31권4A호
• /
• pp.295-302
• /
• 2011

초장대교 콘크리트 고주탑 시공시에 사용되고 있는 슬립폼 시스템의 상승속도를 결정하는 요소인 초기경화시간은 콘크리트가 거푸집에서 안전하게 빠져나올 수 있는 굳기를 갖게 되는 콘크리트 타설 후 경화시간으로서, 배합 시 단위시멘트량 및 타설시 여러 현장 환경에 크게 영향을 받으므로, 콘크리트 타설 전에 초기경화시간을 정확히 파악하는 것은 매우 어렵다. 따라서 슬립폼 시스템의 안전성 확보 및 콘크리트면의 유지관리 문제가 발생하지 않도록 초기경화시간 결정을 위한 콘크리트 경화정도를 파악하는 기술이 필요하다. 더구나 슬립폼 공법은 연속적인 시공이 이루어지므로 거푸집 탈형 전 콘크리트의 경화정도를 연속적으로 파악할 수 있어야 한다. 초음파를 이용한 기법은 콘크리트면에 초음파를 투과시켜 투과된 신호를 측정 및 분석하는 방법으로 정량적이며 연속적으로 콘크리트의 경화정도를 파악할 수 있다. 특히 표면파 속도를 이용하는 기법은 표면을 따라 전파하는 표면파의 특성을 이용한 것으로서 표면파 속도의 변화를 통해 콘크리트 경화정도를 알 수 있으며, 주탑과 같이 두께가 두꺼운 콘크리트 구조물에 적용이 적합하다. 따라서 본 논문에서는 표면파 속도를 이용하여 콘크리트의 경화정도를 추정함으로서 슬립폼 시스템의 상승속도를 결정하는 연구를 수행하였다. 먼저 슬립폼 시스템 상승속도와 초기경화시간과의 관계식을 유도하였으며, 표면파 진행문제의 수치해석 결과를 연속웨이블릿변환 하여 표면파 속도를 추정하였다. 이때 탄성파 발생위치와 두 개의 수신점 거리에 따른 추정된 표면파 속도의 정밀도를 조사하였으며, 추정된 표면파 속도와 탄성계수와의 관계를 조사하였다.