• 한국의류학회지
• /
• 제27권7호
• /
• pp.778-788
• /
• 2003

This study aimed to review the influence of the World War I & II on the beauty culture which include toilette practices, cosmetic products and health habits. Literary materials were gathered and analyzed from books, journals and thesis concerning cosmetics, fashion and background history. Results are as follows: 1. Women's appearance gained social and official approval of its psychological and practical effect during the two wars and was regarded as an important strategy for the war. 2. The chemical industry helped to set forth an aggressive make up industry. 3. The orthopedic technique,1 of the war period resulted in the advancement of the plastic surgery business in the after war world. 4. After the First World War, the newly-risen American bourgeoisies' desire to show off their leisure activities provided from their wealth popularized suntan fast. 5. Strong, vital womanly beauty had been demanded in accordance with women's positive social Participation during the Second World War.

• 패션비즈니스
• /
• 제9권4호
• /
• pp.161-169
• /
• 2005

The purpose of this study was to examine effectiveness of congruence between brand image and advertisement model on fashion advertisement effect. 206 female college students were surveyed for this study. For this study, three hypothesis were set up as follows: First, if fashion brand image and advertisement model image are in congruence, consumers' product preference would be higher, compared to in disharmony. Second, if fashion brand image and advertisement model image are in congruence, consumers' advertisement attitudes would be higher, compared to in disharmony. Third, if fashion brand image and advertisement model image are in congruence, consumers' purchasing intention would be higher, compared to in disharmony. As the results, three all hypothesis were accepted. Based on these results, fashion marketing strategies regarding advertisement would be suggested.

• 약학회지
• /
• 제43권3호
• /
• pp.316-319
• /
• 1999

Chrysin 7-Ο-crotonate was synthesized by condensing crotonic acid with chrysin in organic solvent, tetrahydrofuran (THF) using dicyclohexylcarbodiimide (DCC) and 4-dimethylaminopyridine (DMAP). Its structure was indentified by NMR, MS, UV, IR etc. We also investigated the physico-chemical properties and set up the quantitative anytical method of this compound. The correlation coefficient of calibration curve measured at the isobestic point (340 nm) on this compound was approximately 0.9994 by absorption spetrophtometry. Detection limit was 1.6ng at S/N=3 by using a RP column by HPLC. The hair growth effect fo chrysin 7-Ο-crotonate on the hair of black mouse (C57BL/6), was carried out using paste method. When its ethanol solution was administered to this black mouse by route of skin, this compound promoted the growth of hair.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• 제1호
• /
• pp.37-42
• /
• 2001

In order to answer the challenge that development gave to environment, Chinese cities are making up and putting into effect the green space system planning. The planning main keys are: set down standards and scope of green space; bring the characteristics of every types of green space in to full play and made into basic units of the system; formed powerful links of the system; make full use of the natural system of city, constituted the urban and countryside as a organic whole green space system, therefore give full play their function and ecological effect. In fact, this green space system is a complex system. It is the main body of city ecological system, a main container of the citizen activities of leisure and recreation and a leading factor for making characteristic city landscape. Therefore it is a system carrying city's environment sustainable development.

• 한국항공운항학회지
• /
• 제17권4호
• /
• pp.32-41
• /
• 2009

This paper presents the work being carried out in order to reduce the ground turbulence by the fence in the vicinity of airport runway. In preliminary study, we knows that cross-wind effect in the vicinity of runway is highly dependent on the shape of the buildings and have predicted results confirmed reduction of wind-effect by doing that set up the building with a fence, terraced shape or gap. This study is to figure out effect of ground turbulence by the building with fence, which is changing fence height, in using two-dimensional computational fluid dynamics analysis.

• Journal of the Korean Wood Science and Technology
• /
• 제41권5호
• /
• pp.392-398
• /
• 2013

This study investigated the effect of test zone selection for evaluating bending strength of visually graded lumber. This will contribute to the understanding of two different methods under different standards. In method I, the major defect was randomly placed in the test specimen. In method II, the major defect was randomly placed in the maximum moment zone (MMZ). The results showed that the method II is more accurate for reflecting the effect of defects governing the grade of lumber. Unless the maximum strength-reducing defect (MSRD) is placed in MMZ, the evaluated value would be higher than that of MSRD. For evaluating the modulus of rupture (MOR) of visually graded lumber in test set-up of Method I, the Eq. (5) needs to be considered.

• 센서학회지
• /
• 제32권6호
• /
• pp.487-495
• /
• 2023

Over the past few decades, considerable research has been conducted on field-effect transistor (FET) biosensors; however, other than electrochemical sensors for pH, they have not reached the commercialization stage and still remain at the basic research level. Although several reports have been published on experiments with real biological samples, no reports exist of developments that have reached commercialization or finalized approval for use. In this paper, we explain the reason for the experiments of FET biosensors to induce spurious signals in an experimental setup and explain the existence of misunderstandings regarding the operating principle of FET biosensors owing to the spurious signals. Based on the thoughtful review of the results of previously published papers, we show that the electrochemical read-out principle of FET biosensors requires our intensive understanding of the interfacial potential between the solution and the sensor electrode for further progress in the FET biosensor research.

• 한국인터넷방송통신학회논문지
• /
• 제8권6호
• /
• pp.119-125
• /
• 2008

본 논문에서는 가시거리가 확보가 되는 임의의 산간지형에서 UHF대역의 주파수 환경의 모델링을 제안한다. UHF대역을 사용하는 송신국은 Wt(Wanted Transmitter)로 정의하고 수신국은 Vr(Victim Receiver)로 정의하여 Victim link로 설정하며, 간섭원은 It(Interference Transmitter)와 Wr (Wanted Receiver)으로 정의하여 Interference link로 설정한다. Monte-Carlo 방식을 이용하는 전파간섭분석 시뮬레이션 툴인 SEAMCAT(Spectrum Engineering Advanced Monte Caelo Analysis Tool)을 사용하여 모델링된 주파수 환경을 시뮬레이션 한 결과와 임의의 산간지형에서 측정한 실측데이터를 비교하였다. SEAMCAT의 dRSS(desired Received Signal Strength)계산 값은 지형에 의해 생기는 손실이 있기 때문에 UHF 대역에서 수신 전력에서 70% 오차를 나타냄을 알 수 있었다. 따라서 지형에 의한 간섭회절만큼의 송신전력을 줄임으로써 실제 전파 환경과 유사한 가정을 할 수 있게 하였다. 본 논문에 제시된 UHF 주파수 환경에서의 시뮬레이션 모델링은 UHF 주파수 재배치 및 간섭분석 연구에 기여할 것으로 기대된다.

• Applied Biological Chemistry
• /
• 제46권4호
• /
• pp.323-328
• /
• 2003

국산밀의 제분시 생성되는 밀기울(총 식이섬유 42%)을 밀가루에 $0{\sim}30%4 첨가함에 따라 반죽과 yeast 발효빵의 품질에 미치는 영향을 조사하여 고식이섬유빵의 소재로 활용하였다. 밀가루에 첨가하는 국내산 밀기울의 양이 증가함에 따라 amylograph 최고점도와 set back은 감소하였으며, mixograph에 의한 반죽의 리을로지 특성에서 peak height는 증가한 반면에 mixing time은 감소하는 경향이었다. 밀기울의 첨가는 빵의 부피를 현저히 낮추고 crumb grain, 텍스쳐 등 관능특성에서 빵의 품질을 떨어뜨리는 것으로 나타났다. 밀기울의 첨가에 의해 빵은 L 값이 감소하여 어두워졌으며, crumb의 a 와 b값은 증가하여 적색과 황색의 색조를 부여하였다. 빵의 부피와 관능검사 측정 결과에 따라 국내산 밀기울의 적정 첨가수준은 약 15%까지인 것으로 판단되었다. 15% 밀기울 첨가빵은 대조구 빵에 비해 경도가 2배 이상 높았으며 $5^{\circ}C$와 $25^{\circ}C$에 5일간 저장실험에서 저장 $2{\sim}3$일에 급격한 경도의 증가를 보여주었다.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.45-50
• /
• 2005

In this study, the casting/forging process was applied in manufacturing a low control arm, in order to prove that application of casting/forging process to Al6061 is likely to get the effect of light weight compared with existing steel products and to reduce the cost of materials. Firstly, In order to set up the optimum casting condition of the forging material, Al6061, casting experiments were carried out by controlling pouring temperature of the aluminum for casting, mold temperature, and pouring time. $700^{\circ}C$ pouring temperature, $300^{\circ}C$ mold temperature and 10-second pouring time were taken into account as the optimum casting conditions. With respect to a hot forging test, it is practiced on the basis of a temperature of materials, strain rate, and reduction rate so as to observe each microstructure and examine strain-stress curve simultaneously; examine tensile test and hardness test; eventually set up the optimum hot forging condition. A hot forging test, tensile test, hardness experiment, and microstructure observation were carried out on condition of $70\%$ reduction rate, $500^{\circ}C$ temperature of materials, and 1 strain rate. As a result of those experiments, 330MPa tensile strength, $16.4\%$ elongation, and 122.8Hv hardness were recorded. In oder to get a sound preform which has no unfitting cavity and less flash, two preforms were proposed on the basis of volume rate of the final product; the optimum volume rate of preform for the low control arm was $115\%$. In conclusion, it is confirmed that using the forging material rather than casting materials in casting/forging process is likely to get more superior mechanical properties. Compared with Al6061, performed by means of general forging, moreover, cast/forged Al6061 can not only stimulate productivity by reducing production processes, but cut down the cost of materials by reusing forging scraps.