• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권4호
• /
• pp.221-221
• /
• 2004

Power system has recently used Double-circuit Line and Multi-circuit Line in the industrial development. This has an advantage of system stability and reliability, but the complexity of the system has a disadvantage that makes it difficult to protect the power line. Double-circuit Line has two operation conditions in the Single-circuit operation and Double-circuit operation, so it has mutual impedance. To make it possible for the remaining single-line to operate independently while there is a fault with first line or when maintenance is needed, a trip region for the single-circuit operation should be set in order to set the relay trip region. An optimal trip region for each operation, a different operational conditions for the relay setting should be calculated. In this paper, trip regions of each operation condition have been compared by considering mutual impedance and fault resistance that led to the calculation of fault impedance. Also, as we know that one of the advantages in the distance relay is the back-up protection, we calculated the trip region(Zone-2) in consideration of the mutual impedance.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.15-20
• /
• 2017

This study analyzed the load change of the gear generated by the operation of the vehicle recliner through Finite Element Analysis. The basic model of the recliner used was a commercial product, and the effect of the seat frame was excluded. The load conditions applied to the recliner were set considering gravity, the mass of the seat's back frame, and the weight of a person. The operating mode was set to move the seat back from the vertical to the reclined position. As a result, it was found that the tooth bending amount of the gear rim and wheel increased from the cam rotation angle of 450 degrees, and a change in the contact ratio occurred. Furthermore, excessive torque fluctuations occurred in the ranges of 390 to 450 and 750 to 710 degrees. It was found that this occurred in the region of about 30 degrees before and after the point where the x-axis direction load is larger than the y-direction load. From this torque fluctuation it was determined to likely to cause chattering noise.

• 전기학회논문지
• /
• 제64권10호
• /
• pp.1469-1478
• /
• 2015

In this paper, The methodology of Type-2 fuzzy set-based Radial Basis Function Neural Network(T2RBFNN) is proposed for Sewage Treatment Process and the simulator is developed for application to the real-world sewage treatment plant by using the proposed model. The proposed model has robust characteristic than conventional RBFNN. architecture of network consist of three layers such as input layer, hidden layer and output layer of RBFNN, and Type-2 fuzzy set is applied to receptive field in contrast with conventional radial basis function. In addition, the connection weights of the proposed model are defined as linear polynomial function, and then are learned through Back-Propagation(BP). Type reduction is carried out by using Karnik and Mendel(KM) algorithm between hidden layer and output layer. Sewage treatment data obtained from real-world sewage treatment plant is employed to evaluate performance of the proposed model, and their results are analyzed as well as compared with those of conventional RBFNN.

• 복식문화연구
• /
• 제7권6호
• /
• pp.140-158
• /
• 1999

The purposes of this study are to examine the characters of the lower body shape in the middle aged women and to make slacks pattern on the base of four difference body shapes. The lower body shapes were classified into 4 types on the basis of their lateral view silhouettes. The slacks patterns were based on the lower body shape characters and resulted in followings. In “Type 1” of the right body shape with the standard protrusion of abdomen and hips, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4+0.5㎝+0.5㎝+fold(2.5㎝) and the back waist girth W/4+0.5㎝-0.5㎝+dart(3.5㎝). The front hip girth was defined as H/4+2.0㎝+0.5㎝ and the back hip girth as H/4+2.0㎝-0.5㎝ due to its increased ease amount produced by abdominal fat deposition. In the experimental pattern of “Type 2” with prominent hips, the front and back differences of the waist girth and the hip girth and the hip girth were defined as 1.0㎝ and 2.0㎝ separately. Accordingly, the front waist girth was W/4+0.5㎝+1.0㎝+fold(2.0㎝), the back waist girth W/4+0.5㎝-0.1㎝+dart(6.5㎝), the front hip girth H/4+2.0㎝+1.0㎝ and the back hip girth H/4+2.0㎝-1.0㎝. In “Type 3” with the prominent abdomen and the flat hips, the front waist girth was set up as W/4+0.5㎝+0.5㎝+fold(4.5㎝) for the increased front fold amount and the back waist girth was W/4+0.5㎝+0.5㎝+dart(3.0㎝). The front hip girth was made as H/4+2.5㎝+0.5㎝ and the back hip girth H/4+2.5㎝-0.5㎝. In “Type 4” with prominent abdomen and hips, considered were ① the increased front fold amount due to the abdominal protrusion, ② the increased back dart amount and the decreased back dart length owing to the hips prominent and ③ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5㎝+2.0㎝+fold(5.0㎝), the back waist girth as W/4+0.5㎝-2.0㎝+dart(4.0㎝), the front hip girth as H/4+2.0㎝+1.0㎝ and the back hip girth as H/4+2.0㎝-1.0㎝. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1997년도 추계학술대회논문집
• /
• pp.40-55
• /
• 1997

The purpose of this study are to examine the characters of the lower half body shape in the middle aged women and to make slacks patttern on the base of four difference body shapes as follows. The lower half body shapes were classified into 4 types on the basis of their lateral view silhouette, whose characters were summarized as followings. (1) "Type 1" meant the right body shape with the standard protrusion of abdomen and hips. (2) "Type 2" showed the body shape with prominent hips, which had the flat abdominal silhouette and the greatly curved hips silhouette. (3) "Type 3" was the body shape with the prominent abdomen and the flat hips, in which the frontal view silhouette of the abdomen was greatly curved and the rear view silhouette of hips is less curved. (4) "Type 4" was characterized with prominent abdomen and hips. The slaks patterns were based on the lower half body shape characters and resulted in followings. (1) In the type 1, little difference from conventional patterns was seen in experiment pattern, in which the front waist girth was W/4{\times}0.5cm+0.5cm+fold(2.5cm) and the back waist girth W/4+0.5cm-0.5cm+dart(3.5cm). The front hip girth was defined as H/4+2.0cm+0.5cm and the back hip girth as H/4+2.0cm-0.5cm due to its increased ease amount produced by abdominal fat deposition. (2) In the type 2 experimental pattern, the front and back differences of the waist girth and the hip girth were defined as 1.0cm and 2.0cm separately. Accordingly, the front waist girth was W/4+0.5cm+ 1.0cm+fold(2.0cm), the back waist girth W/4+0.5cm-1.0cm+dart(6.5cm), the front hip girth H/4+2.0cm+1.0cm and the back hip girth H/4+2.0cm-1.0cm. (3) In type 3, the front waist girth was set up as W/4+0.5cm+0.5cm+fold (4.5cm) for the increased front fold amount and the back waist girth was W/4+0.5cm+0.5cm+dart(3.0cm). The front hip girth was made as H/4+2.5cm+0.5cm and the back hip girth H/4+2.5cm-0.5cm. (4) In type 4, considered were $\circled1$ the increased fornt fold amount due to the abdonimal protrusion, $\circled2$ the increased back dart amount and the decreased back dart length owing to the hips prominent and $\circled3$ the front and back differences of waist and hip girth for the lateral view silhouette. Therefore the front waist girth was defined as W/4+0.5cm+2.0cm+flod (5.0cm), the back waist girth as W/4+0.5cm-20.cm+dart(4.0cm), the front hip girth as H/4+2.0cm+1.0cm and the back hip girth as H/4+2.0cm-1.0cm. The sensory evaluation of appearance and comfort was appeared more suitable on the experiment pattern than on the conventional pattern.

• 대한물리치료과학회지
• /
• 제15권1호
• /
• pp.1-9
• /
• 2008

Background and Purpose : This study serves the purpose to present the effective way on back pain therapy for women during their pregnancy by comparing and analyzing the effects influencing on pain index, limits on daily life, and diminution of lumbar curve, when having treated for 6 weeks, dividing into therapy group, applied by decompression therapy on spine without unnecessary effects on the pregnant women and their fetus and the existent general physiotherapy group, applied on diminution of their back pain. Subject & methods : We made impregnate women of 30(25${\sim}$34years), as the subject of this study, who understood, and agreed with, this study, among pregnant women who were diagnosed as back pain. Pain intensity, limit index on daily life, and lumbar curve test, prior to experiment was implemented as paired t－test, comparison of the difference of average by each group before and after experiment was analysed as independent t－test, and statistical examination level was set up as 0.05. Results : The difference of average of pain and limit on daily life between the group, SDTG(spinal decompression therapy group), and the group, GPTG(general physical therapy group), before and after experiment was diminished as much as 44.4% and 16.79% each after completed 6 weeks' experiment, limit on daily life in both groups showed as much as 37.2% and 21.5% each, in the end, they statistically showed conspicuous difference(p<.05). Comparison of lumbar curves between both groups, SDTG and GPTG, before and after experiment, were diminished from -23.13${\pm}$4.85 to -15.66${\pm}$3.71, and there was no remarkable difference(p<.05). Conclusion : As, in this study, decompression therapy is more effective than general physical therapy with pregnancy low back pain in pain, limitation of daily life, lumbar curve.

• 대한약침학회지
• /
• 제5권2호
• /
• pp.25-38
• /
• 2002

Spiral taping shows great effectiveness in relieving musculoskeletal pains. The purpose of this research is to compare effectiveness of herbal acupuncture of Carthami semen(Honghwa) vs its cotreatment with spiral taping for the treatment of acute low back pain. The target patients were those who satisfied with all of the following conditions. 1. Those who suffered from acute low back pain but without past history of the pain in the last six weeks. 2. The pain wasn't radiated to the lower limbs and were without any neurotic symptoms. A computerized randomization was used to set the patients in two groups. The control group was consisted of 41 patients and treated with herbal acupuncture. The experimental group was consisted of 49 patients and treated with spiral taping as well as herbal acupuncture. The treatment was given two times a week and the nurses measured the ROM and VAS evaluation before every treatment. The patients wrote ODI by themselves before the first treatment and after the 3rd treatment. After three months, an interview of the patients' condition through a follow up survey was done. In terms of acute low back pain in both the control group and experimental group, significant treatment effects were found by assessing VAS, ROM and ODI. By comparing the control group and the experimental group, there was more significant improvement in the experimental group than the control group of VAS and ROM, but no significant effect was found between the groups of ODI. This study shows that the herbal acupuncture of Carthami Semen plays a significant role in relieving acute low back pain. It also shows that spiral taping of the experimental group was more highly effective. As a result, spiral taping can be used with acupunture of Carthami Semen for a highly effective treatment for acute low back pain.

• The Journal of Korean Physical Therapy
• /
• 제27권6호
• /
• pp.419-424
• /
• 2015

Purpose: This study aimed to evaluate the effects of lumbar stabilization exercise on the abdominal muscle-back muscle ratio in white-collar workers. Methods: Forty white-collar workers without any pain who worked at an information technology (IT) company located in the Gyeonggi province were included in this study. Of these, 20 subjects were randomly allocated to the lumbar stabilization exercise group, whereas the remaining 20 were randomly allocated to the control group. The lumbar stabilization exercise group performed a 40-minute-long exercise once a week for 8 weeks. The strength of the abdominal and back muscles was measured using the CENTAUR 3-D Spatial Rotation Device (BFMC, Germany). Data analysis was conducted using SPSS 18.0 for Windows. The Paired t-test was performed to compare the values measured before and after exercise within each group. The independent sample t-test was performed to analyze the differences between the 2 groups. The statistical significance for all the analyses was set at .05. Results: The strength of the abdominal muscles after the exercise significantly differed between the lumbar stabilization exercise group and the control group (p<0.05). However, the increase in the abdominal muscle-back muscle ratio was significant in only the lumbar stabilization exercise group (p<0.05), but not in the control group (p>0.05). Conclusion: The improvement of the abdominal muscle-back muscle ratio through lumbar stabilization exercise may have positive effects on lumbar stabilization. Moreover, lumbar stabilization exercise is considered beneficial for the prevention of back pain and musculoskeletal diseases.

• PNF and Movement
• /
• 제15권2호
• /
• pp.195-200
• /
• 2017

Purpose: This study attempts to identify the effects of stretching and core exercise using proprioceptive neuromuscular facilitation (PNF) on the pain and functional disability index of patients with chronic lower back pain. Methods: A total of 20 patients with chronic lower back pain were randomly divided into either the experimental group (n=10), who received PNF stretching and core exercise, or the control group (n=10), who received conventional physiotherapy. Both interventions were applied three times a week for six weeks. The visible analogue scale (VAS) was measured in order to determine the level of pain, while the Oswestry Disability Index (ODI) was used to measure the change in the functional disability index. We conducted a paired t-test to compare the within-group change before and after the intervention. To compare the between-group difference, we used an independent t-test. The statistical significance level was set at ${\alpha}=0.05$ for all the variables. Results: The experimental group showed a significant within-group change in both the VAS and the ODI (p<0.01). The control group also showed a significant change (p<0.01). A significant difference was observed between the experimental group and the control group with regard to the change in both the VAS and the ODI after the interventions (p<0.01). Conclusion: In this study, the application of stretching and core exercise using PNF for subjects who complain of chronic lower back pain proved effective in reducing both pain and functional disability. We therefore expect that this intervention can be applied in the future as a useful program for patients with chronic lower back pain.

• 대한가정학회지
• /
• 제39권8호
• /
• pp.137-154
• /
• 2001

This study was made to draft the tight fitting bodice pattern which horizontal and perpendicular stands are to be lightly set, with the consideration of characteristics of body shape in design of clothes. Measurement of body was conducted on 53 women in twenties, and observation was made on surface development pattern by adhesive tape addition method and gypsum method on three standard objects. In the study, bodice pattern was completed by using already made Somato- measurer, compared with existing bodice pattern, and the results are as follows. The result of the correlation analysis by body measurement shows that chest circumference has a relation to B$.$P-front neck point, side neck point, shoulder point, front interscye breadth point, and the item in spine scapulae point has relation to the item of back neck line, and front & back horizontal values. The degree of shoulder slant, width of armhole and of its depth, the amount of breast, back space, back length were shown to be directly measured from the body. In surface development pattern, tight-fit bodice pattern necessary to the breast volume and back space were shown to be investigated and these volume have to be given in setting up basic line for clothes design together with body measurement value. The result of sensory evaluation for appearance test on fitness shows higher value of research bodice including line of shoulder line, front and back interscye breadth, chest circumference, waist circumference, armhole circumference and of its depth, compared with the research bodice in most items. The result of this study is seen showing high effectiveness for the basic data to design the ready-made dress of high sensitivity of high value added tat.