• 한국철도학회논문집
• /
• 제11권5호
• /
• pp.489-498
• /
• 2008

일반적으로 허용처짐 기준은 정적 사용성과 구조적안전성에 그 기반을 두고 있으며 진동사용성에 대한 고려는 부족하다. 따라서 진동사용성을 고려할 수 있는 교량의 허용처짐 기준이 필요하다고 판단된다. 본 논문에서는, 한국철도교설계기준의 허용처짐기준을 주파수영역의 진동사용성 기준과 비교하였으며, 프랑스 및 일본의 철도교설계기준의 진동사용성 허용기준 또한 분석하였다. 그 결과, 한국철도교설계기준의 경우 열차의 속도에 따른 기준으로 진동지속시간이 부분적으로 고려되었지만 진동사용성은 만족하지 못하고 있는 것으로 판단되었으며, 국외 철도교설계기준비 분석결과, 진동사용성을 고려한 허용처짐기준을 제시할 수 있을 것으로 판단하였다. 공용중인 철도교량의 진동사용성을 평가하기위하여 다양한 형식의 철도교량의 진동신호를 측정하였다. 그리고, 현장에서 적용하기 편리한 진동사용성 처짐 및 강성한계를 제시하기 위하여 공용중인 교량을 대상으로 차량 교량 상호작용해석을 수행하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.80-85
• /
• 2008

In general, deflection limit criteria of bridge design specifications have been considered based on static serviceability and structural stability. Dynamic serviceability induced from bridge vibration actually has not been included in the criteria. Thus, it is necessary for comfort limit to be considered in order to check dynamic serviceability on bridge vibration. In this study, the comfort limit of bridge structures based on the RMQ and VDV considering the signal fluctuation effectively and the time duration exposed has been constructed. The comfort limit developed in time domain was verified by using vibration signals directly measured from the existing bridges. Comparing the developed comfort limit with the conventional ones defined in frequency domain, it is shown that the comfort limit developed in time domain would be more feasible for evaluating quantitatively the serviceability due to bridge vibration. Using the Bridge-train interaction analysis program, dynamic response of the bridge by the stiffness change were obtained for several railway bridges. And, a stiffness limit satisfying the bridge vibration serviceability was estimated by compared with comport limit. From the results, a new deflection limit on bridge structures satisfying the vibration serviceability could be proposed by comparing with the conventional deflection limit criteria.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.161-170
• /
• 2007

In general, deflection limit criteria of bridge design specifications would have been considered based on the static serviceability and structural stability. Dynamic serviceability induced from bridge vibration, as a comfort limit, actually has not been included in the criteria. Thus, it is necessary for dynamic serviceability to be considered in bridge vibration problems and for comfort limit on vibration to be needed for evaluating dynamic serviceability of bridges. In this paper, comfort limits of bridge structures considering the time duration exposed by vibration were examined with frequency and time dependent comfort limits, and they were evaluated by using the vibration signals measured from the existing bridges. Therefore, it is resulted that the time-dependent comfort limit considering the duration of vibration is an efficient estimate for evaluating dynamic serviceability of bridges.

• 한국소음진동공학회논문집
• /
• 제17권10호
• /
• pp.923-935
• /
• 2007

In general, deflection limit criteria of bridge design specifications would have been considered based on the static serviceability and structural stability. Dynamic serviceability induced from bridge vibration, as a comfort limit, actually has not been included in the criteria. Thus, it is necessary for dynamic serviceability to be considered in bridge vibration problems and for comfort limit on vibration to be needed for evaluating dynamic serviceability of bridges. In this paper, comfort limits of bridge structures considering the time duration exposed by vibration were examined with frequency and time dependent comfort limits, and they were evaluated by using the vibration signals measured from the existing bridges. Therefore, it is resulted that the time-dependent comfort limit considering the duration of vibration is an efficient estimate for evaluating dynamic serviceability of bridges.

• Steel and Composite Structures
• /
• 제46권4호
• /
• pp.577-589
• /
• 2023

In this study, on-site testing was carried out to investigate the vibration performance of a cold-formed thin-walled steel floor system. Ambient vibration, walking excitation (single and double persons), and impulsive excitation (heel-drop and jumping) were considered to capture the primary vibration parameters (natural frequencies, damping ratios, and mode shapes) and vertical acceleration response. Meanwhile, to discuss the influence of cement fiberboard on structural vibration, the primary vibration parameters were compared between the systems with and without the installation of cement fiberboard. Based on the experimental analysis, the cold-formed thin-walled steel floor possesses high frequency (> 10 Hz) and damping (> 2%); the installed cement fiberboard mainly increases the mass of floor system without effectively increasing the floor stiffness and may reduce the effects of primary vibration parameters on acceleration response; and the human-structure interaction should be considered when analyzing the vibration serviceability. The comparison of the experimental results with those in the AISC Design Guide indicates that the cold-formed thin-walled steel floor exhibits acceptable vibration serviceability. A crest factor 𝛽_rp (ratio of peak to root-mean-square accelerations) is proposed to determine the root-mean-square acceleration for convenience.

• Structural Engineering and Mechanics
• /
• 제63권6호
• /
• pp.847-856
• /
• 2017

Excessive vibrations can occur in long-span structures such as floors or footbridges due to occupant?s daily activity like walking and cause a so-called vibration serviceability issue. Since 1970s, researchers have proposed many human walking load models, and some of them have even been adopted by major design guidelines. Despite their wide applications in structural vibration serviceability problems, differences between these models in predicting structural responses are not clear. This paper collects 19 popular walking load models and compares their effects on structure?s responses when subjected to the human walking loads. Model parameters are first compared among all these models including orders of components, dynamic load factors, phase angles and function forms. The responses of a single-degree-of-freedom system with various natural frequencies to the 19 load models are then calculated and compared in terms of peak values and root mean square values. Case studies on simulated structures and an existing long-span floor are further presented. Comparisons between predicted responses, guideline requirements and field measurements are conducted. All the results demonstrate that the differences among all the models are significant, indicating that in a practical design, choosing a proper walking load model is crucial for the structure?s vibration serviceability assessment.

• Geomechanics and Engineering
• /
• 제10권2호
• /
• pp.175-188
• /
• 2016

The construction of a new cavern modifies the state of stresses and displacements in a zone around the existing cavern. For multiple caverns, the size of this influence zone depends on the ground type, the in situ stress, the cavern span and shape, the width of the pillar separating the caverns, and the excavation sequence. Performances of underground twin caverns can be unsatisfactory as a result of either instability (collapse) or excessive displacements. These two distinct failures should be prevented in design. This study simulated the ultimate and serviceability performances of underground twin rock caverns of various sizes and shapes. The global factor of safety is used as the criterion for determining the ultimate limit state and the calculated maximum displacement around the cavern opening is adopted as the serviceability limit state criterion. Based on the results of a series of numerical simulations, simple regression models were developed for estimating the global factor of safety and the maximum displacement, respectively. It was proposed that a proper pillar width can be determined based on the threshold influence factor value. In addition, design charts with regard to the selection of the pillar width for underground twin rock caverns under similar ground conditions were also developed.

• 한국안전학회지
• /
• 제34권4호
• /
• pp.76-84
• /
• 2019

The precast pannels are used as formwork in Half-depth precast deck systems. Therefore, it has many advantages, including safe and convenient construction and reduced construction period compared to cast-in-place construction method. In half-depth precast deck systems, the bonding of precast pannels to cast-in place concrete is very important. To enhance the performance of half-depth precast deck system, it is necessary to improve the composite efficiency of the interface or increase the stiffness of the precast pannel to reduce deformation or stress on the interface. In this study, a flexural test of half-depth precast deck system was performed, in which the shear connecting reinforcement was applied to increase the bonding performance at the interface, and the rib shape precast panels were applied to improve stiffness. In addition, the safety and serviceability of these systems were evaluated. Test results show that all of specimens have the required flexural strength under the ultimate strength limit design. It was also evaluated to have sufficient safety for the serviceability of deflection and crack under the serviceability limit design.

• 한국안전학회지
• /
• 제34권3호
• /
• pp.50-56
• /
• 2019

Precast members have relatively good quality because they are manufactured in an environment suitable for quality control. A typical precast method in which pre-fabricated segments are assembled in the field requires a joint. Although the joint is a small part of the member, it greatly affects the behavior and quality of the structural member. In the previous study of this paper, the flexural strength of a joint, which is generally applied to half-depth precast deck systems, was verified to have higher strength than the design requirement. In addition, the proposed joint has been verified to have higher strength by reinforcing the connecting rebar. However, even if the flexural strength of the joints is sufficient, excessive deflection or lack of fatigue performance is likely to cause cracks in the half-depth precast deck system. In this study, the serviceability of the half-deck precast panel specimens with joints was evaluated and the experimental verification was conducted to evaluate the fatigue performance of the joint without connection rebar. As a result, the serviceability such as deflection and crack width was found to be higher than the design requirement in all the specimens. In the fatigue test, the fatigue effect was insignificant even in the absence of connection rebar.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1397-1409
• /
• 2018

Stiffened plates with high slenderness parameters show large out-of-plane deflections, due to elastic buckling, which may occur before the plates reach their ultimate strength. From a serviceability point of view, restriction of out-of-plane deflections exceeding the fabrication tolerance is of primary importance. Compressive strength at the serviceability limit state (SLS) for slender stiffened plates under uniaxial stress was investigated through nonlinear elasto-plastic finite element analysis, considering both geometric and material nonlinearity. Both normal and high-performance steel were considered in the study. The SLS was defined based on a deflection limit and an elastic buckling strength. Probabilistic distributions of the SLS strengths were obtained through Monte Carlo simulations, in association with the response surface method. On the basis of the obtained statistical distributions, partial safety factors were proposed for SLS. Comparisons with the ultimate strength of different design codes e.g. Japanese Code, AASHTO, and Canadian Code indicate that AASHTO and Canadian Code provide significantly conservative design, while Japanese Code matches well with a 5% non-exceedance probability for compressive strength at SLS.