• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.537-545
• /
• 2009

Though there were many research and development about telemedicine on land recently, not yet applied to that on the shore. In this paper, when emergency clinic situation were generated in a ship on shore, the telemedicine system was designed and implemented for transfer and clinic service to doctors on the land by measuring basic body signals of patients. Presently, wireless communication and inmarsat telephone are usually used by simple questions and clinic consults to remote doctors when emergency situation were happened in the ship. In this paper, the telemedicine system on the shore were developed for improving this problems by measuring patient's fundamental conditions such as the blood pressure, pulse, the respiratory condition, electrocardiogram, body temperature, patient image and sending these information to remote doctors on land for more accurate prescription. The developed system can supply the high level clinic service to emergency patients on the shore and cope with the emergency situation in ship.

• Journal of Ship and Ocean Technology
• /
• v.5 no.3
• /
• pp.1-13
• /
• 2001

Present-day rules and regulations for the design and construction of ships are almost without exemption of a prescriptive and deterministic nature. Often it is argued that this situation is far from ideal; it does no right to the advances, which have been made during the past decades in engineering tools in marine technology, both in methodology and in computational power. Within IMO this has been realized for some time and has resulted in proposals to use Formal Safety Assessment(FSA) as a tool to improve and to modernize the rule making process. The present paper makes use of elements of the FSA methodology, but instead of working towards generic regulations or requirements, a Risk Assessment Approach, not unlike a 'safety case'; valid for a certain ship or type of ship is worked out. Delft University of Technology investigated the application of safely assessment procedures in ship design, in co-operation with Anthony Veder Shipowners and safety experts from Safely Service Center BV. The ship considered is a semi-pressurized-fully refrigerated LPG carrier. On the basis of the assumption that a major accident occurs, various accident, scenarios were considered and assessed, which would impair the safety of the carrier. In a so-called Risk Matrix, in which accident frequencies versus the consequence of the scenarios are depicted, the calculated risks all appeared lo be in the ALARP('as low as reasonable practicable') region. A number of design alternatives were compared, both on safety merits and cost-effectiveness. The experience gained with this scenario-based approach will be used to establish a set of general requirements for safety assessment techniques in ship design. In the view that assessment results will be most probably presented in a quasi-quantified manner, the requirements are concerned with uniformity of both the safety assessment. These requirements make it possible that valid comparison between various assessment studies can be made. Safety assessment, founded on these requirements, provides a validated and helpful source of data during the coming years, and provides naval architects and engineers with tools experience and data for safety assessment procedures in ship design. However a lot of effort has to be spent in order to make the methods applicable in day-to-day practice.

• Journal of Navigation and Port Research
• /
• v.42 no.5
• /
• pp.323-330
• /
• 2018

The Korean e-Navigation system is a Korean approach to correspond with implementation of IMO e-Navigation. It provides five services, among them SV20 service, a ship remote monitoring system that collects and processes sensor information related to fire, navigation, and seakeeping performance safety. The system also detects abnormal conditions such as fires, capsizing, sinking, navigation equipment failure during navigation, and calculates the safety index and determines the emergency level. According to emergency level, it provides appropriate emergency response guidance for the onboard operator. The fire safety module is composed of three sub-modules; each module is the safety index sub-module, the emergency level determination sub-module and emergency response guidance sub-module. In this study, operational concept of the fire safety module in SV20 service is explained, and fire safety assessment factors are estimated, to calculate the fire safety index. Fire assessment factors included 'Fire detector position factor,' 'Smoke diffusion rate factor,' and 'Fire-fighting facilities factor.'

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.653-658
• /
• 2023

In systems like the combat management system of a naval ship or smart city of civilians, where many sensors and actuators are connected, the middle-ware DDS (Data Distribution Service) is mainly used to transmit large amounts of data. It is scalable and can effectively respond to the increase in sensors or equipment connected to the system in the future. The engineering control system (ECS), which plays an important role similar to the combat management system of a naval ship, still uses Server-Client model with industrial protocols such as Modbus and CAN (Controller Area Network) bus, to transmit data, which is unfavorable in terms of scalability. However, as automation and unmanned systems advance, more sensors and actuators are expected to be added, necessitating substantial program modification. DDS can effectively address such situations. The purpose of this study is to confirm the development possibility of an integrated monitoring and control system of a ship by using OpenDDS, which follows the OMG (Object Management Group) standard among the middle-ware DDS used in the combat management system. To achieve this goal, field equipment simulators and an ECS server were configured to perform field equipment data input/output and simulation using DDS was performed. The ECS prototype successfully handled data transmission, confirming that DDS is capable of serving as the middle-ware for the ECS of a ship.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.2
• /
• pp.97-104
• /
• 2021

Together with the emerging of the Eco-ship, the application of large-diameter and high-efficiency propeller required more careful attention than before in the design of the shafting system. After the adoption of Environmentally Acceptable Lubricants (EAL) to the stern tube lubrication oil, a number of aft stern tube bearing accidents have been reported, and a variety of institutions have actively conducted research on the cause relationship. This study attempted to find the cause of the accident by measuring the alignment of the shafting system of a medium-sized product/chemical tanker with aft stern tube bearing damage and analyzing the reaction force of each bearing. In addition, a reasonable solution to the correction of the shaft alignment was suggested and the feasibility was reviewed. Through various measured data and analysis, the actual installation of shafting system was slightly different from the design drawing condition, but it was found that each bearing load distribution was within the allowable range. Therefore, it was confirmed that the cause of this accident was due to the dissatisfaction the misalignment slope of aft stern tube bearing rather than the effect of the bearing overload. As a solution to this cause, countermeasures such as double slope were suggested in the aft stern tube bearing, and the characteristics of EAL also seem to have an indirect effect.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.40-43
• /
• 2003

An electric propulsion system integrated with the ship service distribution system offers the naval architect considerable flexibility, and often the choice of a more affordable ship to acquire and operate as compared to a segregated mechanical drive option. United States of America navy announced in 2000 that they selected the electric propulsion system on next generation warship. Specially there is excellent advantages in superconductivity motors which can have higher efficiency, less vibration and noise, smaller dimensions compared with the conventional motors. The 5 MW HTS motor for warship test of electric propulsion was developed and tested. Also it was contracted between AMSC and United States of America navy to develop a 36.5 MW HTS motor in 3 years since March 3, 2003. This paper deals with the technical development tendency of HTS motors in foreign countries as well as in domestic, and it is focused on the application of HIS motors to the electrical propulsion system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.7
• /
• pp.942-947
• /
• 2012

As electricity has been used in ship's propulsion, it is necessary to increase the system voltage and current for the electrical distribution system. So it is required to improve the system safety and efficiency, the power stability, the efficiency of the generation through various analysis of ship's electric power system. In this paper, the electrical service reliability of the power distribution system of semi submersible drilling rigs has been analysed and discussed using ETAP.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.186-189
• /
• 2011

공간정보 데이터 제품 사양은 공간정보를 생산에 요구되는 제반 절차를 문서화하고, 관리하기 위한 용도로 활용되고 있다. 본 논문에서는 수치지도 제품 사양을 시스템적으로 활용, 관리, 운용하기 위한 서비스 모델을 제시한다. 이를 통하여 수치지도 제품에 대한 접근과 이해도를 높임이고, 메타데이터 작성 비용을 절감하는 등 수치지도의 유통 및 활용이 보다 효율적으로 이루어질 수 있을 것이라 판단된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.141-153
• /
• 1999

This paper presents the design and implementation of Internet-based message transfer agent via INMARSAT-C between the land and ship for the convenient message transfer service using the Internet mail or Web. In order to achieve these purpose, overall system configuration for communication between the land and ship, agent modules and database for managing transmission and receiving data are described. For the validity evaluation of this paper, message parsing, database, message format and X.25 interface modules are implemented and tested. Based on the result, the capabilities of ship automation system and ownship database access are discussed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.25 no.1
• /
• pp.15-20
• /
• 2024

In the field of ship inspection in South Korea, due to outdated workflow processes, there is a possibility of tampering with inspection results. Accordingly, research is being conducted to prevent tampering with inspection results by introducing blockchain technology and cloud-based systems that allow real-time tracking and sharing of data, and to establish a transparent and efficient communication system. In this study, unit and integrated processes for overall data management and inspection execution related to ship inspection were implemented to automatically collect, manage, and track various inspection results occurring during the ship inspection process. Through this, it aimed to increase the efficiency of the ship inspection process overall, inducing growth in the ship inspection industry as a whole. The implemented web portal reached a level where trend analysis and comparative analysis with other ships based on inspection results are possible, and subsequent research aims to demonstrate the excellence of the system.