• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.124-126
• /
• 2016

Successful deployment of the Software Defined Network (SDN) depends on its ability to cope up with network failures. There are various types of failures that may occur in an SDN. The most common are switch and link failures. It is necessary to recover the network from failures for a continuous service availability. But for the real-time services fast recovery from the failure is required to minimize the service disruption time. In the proposed work, we focused on minimizing the recovery time after the failure is detected. Once the failure is detected, the controller involvement is needed to dynamically reroute the failure disrupted flows from the failed component to an alternate path. The aim of the proposed scheme is to provide a traffic management scheme which can react to the dynamic network events by rapidly modifying the forwarding behavior of the switches for faster in-band network adaptability. The proposed scheme (1) Considers the shared data and control path delay (2) Optimally utilize the network resources (3) Eliminates the need of constant monitoring overhead at the controller which results into faster detouring and ultimately rapid recovery.

• Korean Journal of Veterinary Service
• /
• v.46 no.3
• /
• pp.181-192
• /
• 2023

Cystatin C, a low-molecular-weight protein synthesized by cells, is being explored as a valuable biomarker for assessing renal function in veterinary medicine. Although the relationship between cystatin C and heart disease remains unclear, some studies suggest a possible association. This retrospective case-control study aimed to investigate the role of cystatin C as a biomarker for heart disease and its correlation with diuretic use in veterinary clinical practice. A total of 39 dogs were included in this study, comprising 9 control dogs without a predisposition to heart disease and 30 dogs in the study group diagnosed with heart disease. Among the 30 dogs with heart disease, 18 exhibited symptoms indicative of heart failure. Results showed significantly higher cystatin C levels in the heart disease group compared to the control group (P<0.05). However, no significant differences were observed among different stages of heart disease severity in the control group. Furthermore, cystatin-C showed statistically positive correlations with BUN (r=0.478, P<0.01), creatinine (r=0.506, P<0.01), and furosemide (r=0.338, P<0.05). Diuretics are essential for managing congestive heart failure, and the observed associations between cystatin C and furosemide suggest potential impacts of diuretic use on renal function in dogs with heart failure. Monitoring renal function markers, such as cystatin C, can aid in predicting and managing potential renal complications, ultimately improving the overall health and quality of life of dogs with heart disease.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.179-182
• /
• 2002

Rapid Prototyping (RP) technologies provide the ability to fabricate initial prototypes from various model materials. Stratasys' Fused Deposition Modeling (FDM) is a typical RP process that can fabricate prototypes out of plastic materials, and the parts made from FDM were often used as load-carrying elements. Because FDM deposits materials in about $300\mutextrm{m}$ thin filament with designated orientation, parts made from FDM show anisotropic material properties. This paper proposes an analytic model to predict the tensile strength of FDM parts. Applying the Classical Lamination Theory, which was developed for laminated composite materials, a computer code was implemented. Tsai-Wu failure criterion was added to the code to predict the failure of the FDM parts. The tensile strengths predicted by the analytic model were compared with experimental data. The data and prediction agreed reasonably well to prove the validity of the model. In addition, a web-based advisory service was developed to provide to strength prediction and design rules for FDM parts.

• International Journal of Reliability and Applications
• /
• v.14 no.1
• /
• pp.41-54
• /
• 2013

In this paper, cost analysis is conducted using inter-failure interval under renewable warranty subject to imperfect repair for multi-component system. One way to model the imperfect repair is to use the quasi-renewal process (Wang and Pham 1996). Two alternative quasi-renewal processes were suggested by Park and Pham (2010) using quasi-renewal process; first is an altered quasi-renewal process with random variable parameter and second is a mixed quasi-renewal process considering replacement service and repair service, simultaneously. In this study, we use the altered and mixed quasi-renewal processes and develop the warranty cost model to obtain the expected value of warranty cost and to help company make important decisions regarding the warranty policy. Numerical examples are used to demonstrate the applicability of the methodology derived in the paper.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.301-302
• /
• 2013

LTE is the outstanding technology to transfer the data and voice. LTE consists of several nodes to transfer data. In case of the failure in the node of LTE, it could not support the service. So telecommunication-providers set up the back-up system for the simultaneous service-provision. But there is still the problem it comes to the network. Even though there is a back-up system, it would be useless the network is down. We propose the scheme to support the service in the case of this network problem in the LTE network. This scheme reduces 23% load in the LTE network in the case of the HSS node's failure or the network to the HSS nodes.

• Journal of the Korean Society for Railway
• /
• v.19 no.5
• /
• pp.609-616
• /
• 2016

The Passenger Service Equipment(PSE) provide various train operation data such as flag station data. When PSE incur service failures or errors, passengers who use the train feel great inconvenience. In this paper, I have chosen PSE that were important to passengers and have applied Reliability Centered Maintenance(RCM), deviating from the existing perspective that operators have taken to perform RCM. FMEA/FMECA was performed for reliability analysis of the PSE. The highly critical device among the PSE is defined as the Passenger Information Control System(PICS), which is used to control the automatic announcement and signaling board. Through Weibull distribution of the PICS, failure analysis was performed. Based on the analyzed results, I have proposed a solution that will minimize service failure of PICS.

• Journal of the Korean Dietetic Association
• /
• v.21 no.1
• /
• pp.25-36
• /
• 2015

In this study, we attempted to improve hospital food delivery service quality and customer satisfaction by using FMEA (Failure Mode and Effect Analysis), which is applied to the quality control of products in manufacturing plants. Subjective food delivery service quality improvement was judged based on a 5-point likert scale. Traditional FMEA uses an RPN (Risk priority number) to evaluate the risk level of a component or process. The RPN index was determined by calculating the product of severity, occurrence, and detection indexes. In our results, total RPN value (P<0.01) significantly decreased after FMEA introduction, whereas customer satisfaction (P<0.001) and food delivery service quality (P<0.001) significantly increased. Specifically, foodservice errors (P<0.01) and loss cost (P<0.01) were significantly improved by FMEA introduction. Taken together, we suggest that FMEA reduces critical activities and errors in foodservice delivery caused by simple priority selection.

• Advances in concrete construction
• /
• v.1 no.3
• /
• pp.201-213
• /
• 2013

While recognizing the problem of reinforcement corrosion and premature structural deterioration of reinforced concrete (RC) structures as a combined effect of mechanical and environmental actions (carbonation, ingress of chlorides), emphasis is given on the effect of the latter, as most severe and unpredictable action. In this study, a simulation tool, based on proven predictive models utilizing principles of chemical and material engineering, for the estimation of concrete service life is applied on an existing reinforced concrete bridge (${\O}$resund Link) located in a chloride environment. After a brief introduction to the structure of the models used, emphasis is given on the physicochemical processes in concrete leading to chloride induced corrosion of the embedded reinforcement. By taking under consideration the concrete, structural and environmental properties of the bridge investigated, an accurate prediction of its service life is taking place. It was observed that the proposed, and already used, relationship of service lifetime- cover is almost identical with a mean line between the lines derived from the minimum and maximum critical values considered for corrosion initiation. Thus, an excellent agreement with the project specifications is observed despite the different ways used to approach the problem. Furthermore, different scenarios of concrete cover failure, in the case when a coating is utilized, and extreme deicing salts attack are also investigated.

• Journal of the Korean Society of Safety
• /
• v.31 no.2
• /
• pp.10-17
• /
• 2016

The purpose of this paper is to deduct components that are in the group of highest risk(top 10%). the group is conducted for classification into groups by values according to risk priority through risk priority number(RPN) of FMEA(Failure modes and effects analysis) sheet. Top 10% of failure mode among total potential failure modes(72 failure modes) of ESS included 5 BMS(battery included) failure modes, 1 invert failure mode, and 1 cable connectors failure mode in which BMS was highest. This is because ESS is connected to module, try, and lack in the battery part as an assembly of electronic information communication and is managed. BMS is mainly composed of the battery module and communication module. There is a junction box and numerous connectors that connect these two in which failure occurs most in the connector part and module itself. Finally, this paper proposes RPN by each step from the starting step of ESS design to installation and operation. Blackouts and electrical disasters can be prevented beforehand by managing and removing the deducted risk factors in prior.

• Journal of Distribution Science
• /
• v.17 no.11
• /
• pp.73-79
• /
• 2019

Purpose: The purpose of this study was evaluated to compare the predictive power of distress prediction models by using discriminant analysis method and logit analysis method for food service franchise industry in Korea. Research design, data and methodology: Forty-six food service franchise industry with high sales volume in the 2017 were selected as the sample food service franchise industry for analysis. The fourteen financial ratios for analysis were calculated from the data in the 2017 statement of financial position and income statement of forty-six food service franchise industry in Korea. The fourteen financial ratios were used as sample data and analyzed by t-test. As a result seven statistically significant independent variables were chosen. The analysis method of the distress prediction model was performed by logit analysis and multiple discriminant analysis. Results: The difference between the average value of fourteen financial ratios of forty-six food service franchise industry was tested through t-test in order to extract variables that are classified as top-leveled and failure food service franchise industry among the financial ratios. As a result of the univariate test appears that the variables which differentiate the top-leveled food service franchise industry to failure food service industry are income to stockholders' equity, operating income to sales, current ratio, net income to assets, cash flows from operating activities, growth rate of operating income, and total assets turnover. The statistical significances of the seven financial ratio independent variables were also confirmed by logit analysis and discriminant analysis. Conclusions: The analysis results of the prediction accuracy of each distress prediction model in this study showed that the forecast accuracy of the prediction model by the discriminant analysis method was 84.8% and 89.1% by the logit analysis method, indicating that the logit analysis method has higher distress predictability than the discriminant analysis method. Comparing the previous distress prediction capability, which ranges from 75% to 85% by discriminant analysis and logit analysis, this study's prediction capacity, which is 84.8% in the discriminant analysis, and 89.1% in logit analysis, is found to belong to the range of previous study's prediction capacity range and is considered high number.