• 방송공학회논문지
• /
• 제4권1호
• /
• pp.76-85
• /
• 1999

프랙탈 부호화 방식에서의 블록 손실 효과는 DCT 기반 블록 부호화 방식에서와는 달리 손실 블록의 참조에 의한 에러 전파 효과 때문에 보다 심각한 화질 저하를 초래한다. 따라서 본 논문에서는 Jacquin 방법에 의해 프랙탈 부호화된 영상을 ATM 망과 같은 손실망을 통해 전송할 경우 발생할 수 있는 블록 손실을 복구하는 방법을 제안한다. Jacquin 의 프랙탈 부호화 체계는 중요도에 따라 머리부호와 본체 부호의 2계층 부호화 체계로 구성된다. 제안된 블록 손실 복구 알고리듬의 핵심 기법은 블록 특성이 손실 블록과 유사한 인접 치역 블록들의 축소 사상 파라미터들을 사용하여 손실 화소들을 추정하는 츠랙탈 외삽이며, 이는 복호화 과정에서 반복적으로 손실 블록들에 적용된다. 실험을 통하여, 제안된 복구 알고리듬이 주관적 화질 뿐만 아니라 PSNR 에서도 우수한 성능을 갖고 있음을 보인다.

• 한국수소및신에너지학회논문집
• /
• 제16권2호
• /
• pp.170-179
• /
• 2005

Electrolyte loss is considered as one of the major obstacles limiting the life time of molten carbonate fuel cells (MCFCs). Unit cells with an effective area of 100 $cm^2$ were prepared and were operated to determine the optimum matrix thickness which contains the maximum amount of electrolyte without serious preformance loss caused by high resistance. Matrices with different thickness, 1.45, 1.8, and 2.3 mm, were used in unit cells and those cells were operared about 5000, 10000, and 4000 hrs. The unit cell used 1.8 mm thick matrix showed 0.85 V (at 150 mA/$cm^2$) as the intial performance and this cell voltage is not lower than the cell voltage obtained in the cell with 1 mm thick matrix. This cell was operated for 10000 hrs. The cell used 1.45 mm thick matrices showed 16.6 % in the electrolyte loss after 5000 hr operation. In the case of the cell with 2.3 mm thick matrix, the initial cell voltage was below 0.80 V (at 150 mA/$cm^2$). For thermal cycle test, the gas crossover amount of unit cell used 1.8 mm thick matrix was much less than that of the cell with 1.0 mm thick matrix.

• Journal of Yeungnam Medical Science
• /
• 제24권1호
• /
• pp.79-84
• /
• 2007

Sphenoid sinus aspergillosis is notorious for its serious complications, such as permanent cranial nerve deficits and possible death. The most common associated symptoms are headache, followed by visual changes, and cranial nerve palsies. Because of an insidious onset, frequently resulting in missed and delayed diagnosis, sphenoid sinus aspergillosis is a potentially lethal medical condition. We report a case of visual loss secondary to isolated sphenoid sinus aspergillosis. A 69-year-old man presented to our hospital with the complaint of headache. The headache started one year previously and was described as severe dull pain localized bilaterally to the temporo-orbital region. The patient took daily NSAIDs for the pain. The neurological examination was normal. The MRI of the brain showed a left sphenoid sinusitis. A transnasal endoscopic superior meatal sphenoidotomy was performed. Aspergillosis was confirmed after a surgical biopsy was obtained. The patient was discharged from hospital without antifungal therapy. One month later, the patient complained of headache and loss of vision bilaterally. The orbital MRI showed a left cavernous sinus and bilateral optic nerve invasion. The loss of visions was permanent. In our case, the diagnosis was delayed; antifungal agents were not administered after surgery and the patient lost his vision as a result. Therefore, early diagnosis and proper treatment are important. Although the treatment of an invasive type of aspergillus has not been established, surgical removal of a nidus and aggressive antifungal therapy are recommended.

• 한국통신학회논문지
• /
• 제29권6B호
• /
• pp.538-547
• /
• 2004

버스트 제어 정보와 버스트를 offset 시간으로 분리하여 전송하는 광 버스트 스위칭 망에서 버스트 충돌 발생은 서비스 품질 저하를 초래하며 이러한 현상은 버스트 크기가 클수록 더욱더 심각해진다. 그러므로 노드에서 버스트 충돌 방지를 위한 효과적인 예방 대책이 반드시 수립되어야 한다. 그러나 현재 광 버스트 스위칭 망에서 제시되고 있는 버스트 충돌에 대한 다양한 접근 방법들은 버스트 충돌 발생 후 이를 해결하기 위한 방안으로 제시되고 있다. 그러나 본 논문에서 제안한 기법은 Ingress 에지 노드에서 부 반송파 다중화 기술을 이용하여 버스트 전송 크기를 줄임으로써 코어 망에서 스케줄링 시 발생할 수 있는 버스트 충돌 확률을 미리 예방하는 방법이다. 이를 위해 본 논문에서는 부 반송파 다중화 기한의 광 버스트 스위칭 망에서 버스트 생성과 전송을 위한 모듈구조와 기법을 제안하였다. 또한, 제안된 기법에 대해 파장 개수와 부 반송파 개수에 따른 버스트 손실률, 처리율 및 총 용량 관점에서 성능 평가를 실시하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.81-86
• /
• 1996

This study was performed to evaluate the reduction in bending properties of radiata pine sapwood associated with incipient brown-rot decay. Decayed bending specimens by Tyromyces palustris and Gloeophyllum trabeum for varoious periods were tested destructively. Brown-rot decay by T. palustris and G. trabeum caused serious reduction in bending properties at very early stages of decay, with about 30 percent decrease in bending strength observed for only 1~2 percent weight loss. In general, the reduction in bending properties caused by T. palustris was somewhat greater than that by G. trabeum. Work to maximum load was reduced most severely and rapidly from the onset of decay, while modulus of elasticity showed a much more moderate rate of reduction. Modulus of rupture was affected by decay to a greater extent than was modulus of elasticity. Since a relatively strong correlation between weight loss and bending strength was observed, the residual strength of decayed wood can be predicted by weight loss due to decay. The results of this study indicate that very early stages of brown-rot decay reduce the bending strength significantly. Thus, it is recommended that all load-bearing members in wooden structures, especially those that are periodically wetted, should be inspected regularly to prevent a sudden failure even though there are no definite signs of decay.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.425-428
• /
• 2006

In order to estimate the reduction of laodbearing capacity, followed by the attributive change of heat while high strength concrete structure is revealed on fire it is necessary to evaluate, it is necessary to evaluate the property of material under high temperature such as thermal conductivity, specific heat, compressive strength, modulus of rigidity and diminution figure. Therefore, this study is for the purpose of presenting evaluation data for the analysis of thermal behavior about the high strength concrete material under high temperature, through the experiment by manufacturing concrete(40, 50, 60, 80, 100 MPa) commonly used in the construction field. As a result of the study, in the case of physical attribute, it demonstrates a greater fluctuation of change than the one of 30 MPa concrete. In case of specific heat, the high strength concrete, shown the serious diminution between $500{\sim}600^{\circ}C$, presents the thermal change area corresponding to the change of high strength concrete. In compressive strength, regardless of intensity of concrete, all of them show the first intensity loss between normal temperature and $100^{\circ}C$, the dramatic loss beyond $400^{\circ}C$. The concrete weighing above 50 MPa shows a twice lower dramatic intensity loss than the one weighing $30{\sim}40MPa$. The concrete ranging from $60{\sim}80MPa$, shows the biggest diminution of modulus of elasticity under $400^{\circ}C$, which implies the structural unstability of temperature.

• 대한화장품학회지
• /
• 제48권3호
• /
• pp.245-254
• /
• 2022

본 연구에서는 655 nm에서 저출력 레이저와 625 ± 5 nm와 850 ± 10 nm에서 파장을 방출하는 LED를 이용한 복합 광선 요법이 탈모 및 두피에 나타나는 효능을 조사하고자 하였다. 이번 연구에는 총 33 명의 시험대상자가 등록되었다. 각 시험대상자는 Low-level laser therapy (LLLT)와 light-emitting diode (LED) 기기를 매일 10 min 씩 12 주간 두피와 모발에 사용했다. LLLT와 LED 기기를 사용한 지 12 주 후, 두피의 붉은기, 탄력, 수분 함량에서 상당한 개선이 있었으며, 모발의 윤기와 인장 강도, 탈락 모발 수가 개선되었다. 시험대상자가 시험 기기를 사용하는 기간 동안 특별한 피부 이상반응에 대한 보고는 없었다. LLLT와 LED를 이용한 복합 광선 요법은 탈모와 두피 상태 개선에 효과적인 요법임이 입증되었다.

• 한방비만학회지
• /
• 제23권2호
• /
• pp.78-85
• /
• 2023

Objectives: Weight gain is one of the symptoms of hypothyroidism and it could deteriorate thyroid function. Our objectives are to evaluate weight changes and analyze adverse events in overweight and obese women with hypothyroidism who were prescribed Gamitaeeumjowee-tang. Methods: A retrospective chart review was conducted using medical records of patients with hypothyroidism, who had body mass indexes (BMI) above 23 and were prescribed Gamitaeeumjowee-tang for 12 weeks between August 2017 and November 2022. Reported adverse events (AEs) were assessed by severity, causality and system-organ classes. Results: Thirty patients were included (mean±standard deviation, age 46.10±9.94 years, weight 70.52±11.18 kg, BMI 28.30±3.80 kg/m²). The mean total weight loss of hypothyroidism patients was 5.45±2.77 kg, while the mean weight loss rate and mean BMI change were 7.66±3.41% and 2.18±1.07 kg/m², respectively. Among evaluated causality of adverse events, 'Unlikely' was predominant (80.8%) and severity assessment showed most of the symptoms were mild (91.7%). Conclusions: Gamitaeeumjowee-tang could be an option for hypothyroidism patients, who are overweight or obese, to lose weight and no serious adverse events occurred. Further well-designed clinical studies are recommended.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.343-346
• /
• 2005

In this study, a basic concept of wavelet encoding and its advantages over Fourier based phase encoding application. Wavelet encoding has been proposed as an alternative way to Fourier based phase encoding in magnetic resonance imaging. In wavelet encoding, the RF pulse is designed to generate wavelet-shaped excitation profile of spins. From the resulting echo signals, the wavelet transform coefficients of spin distribution are acquired and an original spin density is reconstructed from wavelet expansion. Wavelet encoding has several advantages over phase encoding. By minimizing redundancy of the data acquisition in a dynamic series of images, we can avoid some encoding steps without serious loss of quality in reconstructed image. This strategy may be regarded as data compression during imaging. Although there are some limitations in wavelet encoding, it is a promising scheme in a dynamic imaging.

• International Journal of Fluid Machinery and Systems
• /
• 제2권1호
• /
• pp.21-30
• /
• 2009

Slurry wear with sand particles in rivers is a serious problem for pump operation. Therefore, a technique to predict wear volume loss is required for selecting wear resistant materials and determining specifications for the maintenance period. This paper reports a method for predicting the wear depth distribution on the blade of an impeller. Slurry wear tests of an aluminum pump impeller were conducted. Prediction results of wear depth distribution approximately correspond with the results of slurry wear tests. This technique is useful for industrial application.