• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.809-818
• /
• 2007

Generally, carriers on which microwave circuits are mounted are used as building blocks of MIC module for the convenience of MIC assembly and the unit module characterization. However the interconnection of the microstrip-based carriers by wire bonding causes the serious problem of mismatch and results in the higher insertion loss as frequency becomes higher. The gap and the depth between carriers are considered as the main reason of the degradation. The CPW can be the solution to cope with such problem considering its field are dominantly concentrated on the top plane. In this paper, we propose and demonstrate the CBFGCPW to microstrip transition with the low insertion loss that can be applied without causing the MIC carrier interconnection problem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9A
• /
• pp.1295-1305
• /
• 1999

In this paper, we present the implementation and performance analysis of H.324M mobile multimedia terminal which s under standardization. The H.324M is the mobile extension of H.324 which is the standard for low bit rate multimedia terminals operating over GSTN. For H.324M, the multiplexing protocol (H.223) of H.324 is enhanced to protect data from the transmission errors over mobile channels. The multiplexing protocol of H.324M is classified into Levels 0, 1, 2, and 3 depending on the level of error protection. Each Level is analyzed according to different types of the data loss elements. Simulation results show that the loss caused by the corrupted flag and header produces the most serious performance degradation. Levels 1 and 2 which protect the header and flag are effective in reducing the total loss. Furthermore, the optimal flag length and threshold value for Levels 1 and 2 are determined.

• Journal of Broadcast Engineering
• /
• v.4 no.1
• /
• pp.76-85
• /
• 1999

The degradation of image quality by block loss is more serious in fractal coded images with the error propagation due to mapping from the lost blocks than in DCT coded images. Therefore. a new algorithm is presented for recovering the blocks lost in the transmission through the lossy network as A TM network of the images coded by Jacquins fractal coding. Jacquins fractal code is divided into two layers of header code and main code according to its importance. The key technique of the proposed BLRA (block loss recovery algorithm) is a fractal extrapolation that estimates the lost pixels by using the contractive mapping parameters of the neighboring range blocks whose characteristics are similar to a lost block. The proposed BLRA is applied to the lost blocks in the iteration of decoding. Some experimental results show the proposed BLRA yields excellent performance in PSNR as well as subjective quality.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.2
• /
• pp.170-179
• /
• 2005

Electrolyte loss is considered as one of the major obstacles limiting the life time of molten carbonate fuel cells (MCFCs). Unit cells with an effective area of 100 $cm^2$ were prepared and were operated to determine the optimum matrix thickness which contains the maximum amount of electrolyte without serious preformance loss caused by high resistance. Matrices with different thickness, 1.45, 1.8, and 2.3 mm, were used in unit cells and those cells were operared about 5000, 10000, and 4000 hrs. The unit cell used 1.8 mm thick matrix showed 0.85 V (at 150 mA/$cm^2$) as the intial performance and this cell voltage is not lower than the cell voltage obtained in the cell with 1 mm thick matrix. This cell was operated for 10000 hrs. The cell used 1.45 mm thick matrices showed 16.6 % in the electrolyte loss after 5000 hr operation. In the case of the cell with 2.3 mm thick matrix, the initial cell voltage was below 0.80 V (at 150 mA/$cm^2$). For thermal cycle test, the gas crossover amount of unit cell used 1.8 mm thick matrix was much less than that of the cell with 1.0 mm thick matrix.

• Journal of Yeungnam Medical Science
• /
• v.24 no.1
• /
• pp.79-84
• /
• 2007

Sphenoid sinus aspergillosis is notorious for its serious complications, such as permanent cranial nerve deficits and possible death. The most common associated symptoms are headache, followed by visual changes, and cranial nerve palsies. Because of an insidious onset, frequently resulting in missed and delayed diagnosis, sphenoid sinus aspergillosis is a potentially lethal medical condition. We report a case of visual loss secondary to isolated sphenoid sinus aspergillosis. A 69-year-old man presented to our hospital with the complaint of headache. The headache started one year previously and was described as severe dull pain localized bilaterally to the temporo-orbital region. The patient took daily NSAIDs for the pain. The neurological examination was normal. The MRI of the brain showed a left sphenoid sinusitis. A transnasal endoscopic superior meatal sphenoidotomy was performed. Aspergillosis was confirmed after a surgical biopsy was obtained. The patient was discharged from hospital without antifungal therapy. One month later, the patient complained of headache and loss of vision bilaterally. The orbital MRI showed a left cavernous sinus and bilateral optic nerve invasion. The loss of visions was permanent. In our case, the diagnosis was delayed; antifungal agents were not administered after surgery and the patient lost his vision as a result. Therefore, early diagnosis and proper treatment are important. Although the treatment of an invasive type of aspergillus has not been established, surgical removal of a nidus and aggressive antifungal therapy are recommended.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6B
• /
• pp.538-547
• /
• 2004

Optical Burst Switched (OBS) networks usually employ one-way reservation by sending a burst control packet (BCP) with a specific offset time, before transmitting each data burst frame (BDF). Therefore, The quality of service may be degraded because contentions may lead to loss of BDFs. Especially, this phenomenon becomes more serious when burst size is longer. This necessitates an effective method of prevention to avoid burst collision in nodes. OBS networks can employ several methods to avoid such burst losses. One is that burst size is cut short to reduce burst loss probability during scheduling time. In this paper, we evaluate the burst generation and transmission using Sub-Carrier Multiplexting (SCM) in OBS networks. We propose an appropriate burst assembly architecture and transmission scheme based on SCM in OBS networks. The performance of SCM in OBS networks is examined in terms of number of Sub-Carriers per wavelength, burst loss probability, throughput, and total bandwidth of an optical fiber.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.1
• /
• pp.81-86
• /
• 1996

This study was performed to evaluate the reduction in bending properties of radiata pine sapwood associated with incipient brown-rot decay. Decayed bending specimens by Tyromyces palustris and Gloeophyllum trabeum for varoious periods were tested destructively. Brown-rot decay by T. palustris and G. trabeum caused serious reduction in bending properties at very early stages of decay, with about 30 percent decrease in bending strength observed for only 1~2 percent weight loss. In general, the reduction in bending properties caused by T. palustris was somewhat greater than that by G. trabeum. Work to maximum load was reduced most severely and rapidly from the onset of decay, while modulus of elasticity showed a much more moderate rate of reduction. Modulus of rupture was affected by decay to a greater extent than was modulus of elasticity. Since a relatively strong correlation between weight loss and bending strength was observed, the residual strength of decayed wood can be predicted by weight loss due to decay. The results of this study indicate that very early stages of brown-rot decay reduce the bending strength significantly. Thus, it is recommended that all load-bearing members in wooden structures, especially those that are periodically wetted, should be inspected regularly to prevent a sudden failure even though there are no definite signs of decay.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.425-428
• /
• 2006

In order to estimate the reduction of laodbearing capacity, followed by the attributive change of heat while high strength concrete structure is revealed on fire it is necessary to evaluate, it is necessary to evaluate the property of material under high temperature such as thermal conductivity, specific heat, compressive strength, modulus of rigidity and diminution figure. Therefore, this study is for the purpose of presenting evaluation data for the analysis of thermal behavior about the high strength concrete material under high temperature, through the experiment by manufacturing concrete(40, 50, 60, 80, 100 MPa) commonly used in the construction field. As a result of the study, in the case of physical attribute, it demonstrates a greater fluctuation of change than the one of 30 MPa concrete. In case of specific heat, the high strength concrete, shown the serious diminution between $500{\sim}600^{\circ}C$, presents the thermal change area corresponding to the change of high strength concrete. In compressive strength, regardless of intensity of concrete, all of them show the first intensity loss between normal temperature and $100^{\circ}C$, the dramatic loss beyond $400^{\circ}C$. The concrete weighing above 50 MPa shows a twice lower dramatic intensity loss than the one weighing $30{\sim}40MPa$. The concrete ranging from $60{\sim}80MPa$, shows the biggest diminution of modulus of elasticity under $400^{\circ}C$, which implies the structural unstability of temperature.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.3
• /
• pp.245-254
• /
• 2022

In this study, we tried to investigate the efficacy of combined light therapy using low-power lasers at 655 nm and LEDs emitting wavelengths at 625 ± 5 nm and 850 ± 10 nm in hair loss and scalp. A total of 33 subjects were enrolled in this clinical trial. Each subject used the LLLT and LED device on the scalp for 10 min on a daily basis for 12 weeks. After 12 weeks of LLLT and LED device use, there were significant improvements in redness, elasticity, and hydration of the scalp. Additionally, hair luster and tensile strength were improved. A remarkable decrease in total shed hairs was observed in all subjects at 4, 8, and 12 weeks without any serious adverse event. Combined light therapy using LLLT and LEDs proved to be an effective treatment for reducing hair loss and improving scalp condition.

• Journal of Korean Medicine for Obesity Research
• /
• v.23 no.2
• /
• pp.78-85
• /
• 2023

Objectives: Weight gain is one of the symptoms of hypothyroidism and it could deteriorate thyroid function. Our objectives are to evaluate weight changes and analyze adverse events in overweight and obese women with hypothyroidism who were prescribed Gamitaeeumjowee-tang. Methods: A retrospective chart review was conducted using medical records of patients with hypothyroidism, who had body mass indexes (BMI) above 23 and were prescribed Gamitaeeumjowee-tang for 12 weeks between August 2017 and November 2022. Reported adverse events (AEs) were assessed by severity, causality and system-organ classes. Results: Thirty patients were included (mean±standard deviation, age 46.10±9.94 years, weight 70.52±11.18 kg, BMI 28.30±3.80 kg/m²). The mean total weight loss of hypothyroidism patients was 5.45±2.77 kg, while the mean weight loss rate and mean BMI change were 7.66±3.41% and 2.18±1.07 kg/m², respectively. Among evaluated causality of adverse events, 'Unlikely' was predominant (80.8%) and severity assessment showed most of the symptoms were mild (91.7%). Conclusions: Gamitaeeumjowee-tang could be an option for hypothyroidism patients, who are overweight or obese, to lose weight and no serious adverse events occurred. Further well-designed clinical studies are recommended.