• Journal of the Korean Geotechnical Society
• /
• v.22 no.10
• /
• pp.165-172
• /
• 2006

This study describes a series of model tests on instrumented pile groups embedded in HAP-CHEN sand undergoing lateral movement. We tried to find the effect of group piles dependent on a number of factors, including the position of the pile in a group, the pile spacing, and the pile arrangement. The results of test are as follows. For the group piles, the bending moment profile for each pile is similar in shape to that of single pile, although the magnitude and the position of the maximum bending moment are different. $R_M$ (the ratio of maximum bending moment) and $R_F$ (the ratio of resistance to lateral soil movement) were found to increase with increasing pile spacing. When a pile is in a group under lateral soil movement, RM increased in the order of the middle row, front row, back row, according to the direction of lateral deformation, and the outer pile has a larger RM than the inner pile.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.146-153
• /
• 2000

The rubber crawler system for farm machine is composed of driving units such as track rollers, driving sprockets and rubber crawlers. Vibration characteristics of the rubber crawler system varies by driving speed, center of gravity, mass□moment of inertial□location arrangement of track rollers and dynamic parameters such as dynamic spring constant (k) and viscous damping coefficient (c) of a rubber crawler. In general, vibration of the rubber crawler system occurs by reason for mechanical interaction between the rubber crawler and track rollers. Because the dynamic spring constant and viscous damping coefficient vary periodically by mechanical characteristics(deformation characteristics) of the rubber crawler when track rollers drive on the between lugs of the rubber crawler. Therefore, both dynamic parameters k and c were expressed as Fourier series by authors through the shaking test of the rubber crawler and further, vibration characteristics of the rubber crawler system could be simulated analytically. However, actual values of dynamic parameters k and c are different from those obtained by the shaking test because dynamic characteristics of the rubber crawler vary by the effect of variable tension and driving resistance of track rollers. So, actual values of k and c should be identified in the condition of actual driving test. In this study, dynamic parameters such as k and c of the rubber crawler system, which are expressed as Fourier series, were identified using the Gauss-Newton Method. Therefore, validity of identified parameters k and c was discussed through the simulation using experimental data of actual driving test. As a result, in the Fourier series of dynamic parameters of spring constant k and viscous damping coefficient c, excellent parameter convergence and simulation were observed using the Fourier series' zero order and first term of the dynamic model. Furthermore, it was clarified that identification for model parameters which are fitted to actual dynamic motion (vibration) wave of the crawler system was possible by using the time series data observed in vertical and pitching motion of the crawler system.

• Korean Journal of Plant Taxonomy
• /
• v.31 no.4
• /
• pp.321-341
• /
• 2001

Phytoliths of leaf blades of Oryza were studied by light and scanning electron microscopy in order to assign the diagnostic character and taxonomic key for the genus. Some phytoliths such as stomatal apparatus, long-cell and short-cell, existing at the same position on the abaxial side of leaf blade, were intensively investigated because of their various forms documented in a previous study. These characters have value either for testing infrageneric classification or for identifying taxa within the genus. Stomatal phytolith is formed by integration of several kinds of sources, such as the guard and subsidiary cell and the papillae. The stomatal phytolith, characterized by not only the absence and presence of phytolith originated by the papillae developed on the guard and subsidiary cell but also their pattern of arrangement, shows various morphologies, and these features have congruent with the infrageneric classification such as section and/or series. Long-cell phytolith is characterized by the absence/presence, arrangement and morphology of phytoliths originated by the papillae on the cell surface. These features may hardly have any systematic relevance within the genus, but contain some informations for identifying of species. All of short-cell phytoliths found are silica body. They form various shapes like cross, bilobate, saddlelike and trilobate, and these features are consistent with infrageneric classification such as section and/or series. Also, some characters, the absence/presence of band of short cell phytolith within costal strip, the absence/presence of saddlelike phytolith within intercostal strip and the number of band of short cell phytolith within costal strip are various according to taxa, but these features do not fall into infrageneric classification. Some taxonomic keys on the phytoliths of stomatal, long-cell and short-cell were developed by their features, and the agreement between these characters and infrageneric classifications was also discussed.

• Water for future
• /
• v.25 no.1
• /
• pp.93-100
• /
• 1992

A study on the Derivation of the Unit Hydrograph using Multiple Regression Moe이. The purpose of this study is to deriver an optimal unit hydrograph suing the multiple regression model, particularly when only small amount of data is available. The presence of multicollinearity among the input data can cause serious oscillations in the derivation of the unit hydrograph. In this case, the oscillations in the unit hydrograph ordinate are eliminated by combining the data. The data used in this study are based upon the collection and arrangement of rainfall-runoff data(1977-1989) at the Soyang-river Dam site. When the matrix X is the rainfall series, the condition number and the reciprocal of the minimum eigenvalue of XTX are calculated by the Jacobi an method, and are compared with the oscillation in the unit hydrograph. The optimal unit hydrograph is derived by combining the numerous rainfall-runoff data. The conclusions are as follows; 1)The oscillations in the derived unit hydrograph are reduced by combining the data from each flood event. 2) The reciprocals of the minimum eigen\value of XTX, 1/k and the condition number CN are increased when the oscillations are active in the derived unit hydrograph. 3)The parameter estimates are validated by extending the model to the Soyang river Dam site with elimination of the autocorrelation in the disturbances. Finally, this paper illustrates the application of the multiple regression model to drive an optimal unit hydrograph dealing with the multicollinearity and the autocorrelation which cause some problems.

• The Korean Journal of Cytopathology
• /
• v.8 no.1
• /
• pp.1-10
• /
• 1997

The fine needle aspiration biopsy(FNAB) has become a popular method to diagnose mass lesions of the liver. Although many reports have listed FNAB criteria to be used to diagnose hepatocellular carcinoma(HCC), a diagnostic dilemma still exists at the extreme ends of the spectrum, particularly for well differentiated HCC. The authors reviewed a series of FNAB specimens of the liver to distinguish well differentiated HCC from nonneoplastic liver. Fifteen cytologic features were examined in this study: high cellularity, large sheet formation, trabecular pattern, acinar pattern, dispersed pattern, irregular arrangement, increased nuclear/cytoplasmic ratio, naked nuclei, irregular chromatin, irregular nuclear contour, multinucleation, uniform macronucleoli, multiple nuclei, uniform small cytoplasm and monotony of atypia. These features were examined in a series of 76 FNAB specimens. Fifty two specimens were from patients with HCC and 24 specimens were from patients with nonneoplastic lesion or tumors other than HCC containg adequate amount of nonneoplastic hepatocytes in smear. All specimens were coded as to the presence or absence of the above cytologic features. With the use of step-wise logistic regression analysis, three features were identified as the key cytologic features predictive of HCC: irregular chromatin, monotony of atypia and absence of large sheet formation. When these criteria were used, the sensitivity diagnosing HCC by FNAB was 94.2%, specificity 100%, positive predictive value 100% and negative predictive value was 88.9%.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.201-204
• /
• 2002

The rates of the aminolysis of S-phenyl substituted-acetate series $(RC(=O)SC_6H_4Z$, with R=Me, Et, i-Pr, t-Bu and Bn) with benzylamines $(XC_6H_4CH_2NH_2)$ are not correlated simply with the Taft's polar $({\sigma}^{\ast})$ and/or steric effect constants $(E_s)$ of the substituents due to abnormally enhanced rate of the substrate with R=Et. Furthermore, the cross-interaction constant, ${\rho}x_z$ , is the largest with R=Et. These anomalous behaviors can only be explained by invoking the vicinal bond $({\sigma})$-antibond $({\sigma}^{\ast})$ charge transfer interaction between C-$C{\alpha}$ and C-S bonds. In the tetrahedral zwitterionic intermediate, $T^{\pm}$ , formed with R=Et the vicinal ${\sigma}_{c-c}-{\sigma}^{\ast}_{c-s}$ delocalization is the strongest with an optimum antiperiplanar arrangement and a narrow energy gap, ${\Delta}{\varepsilon}={\varepsilon}_{{\sigma}^{\ast}}-{\varepsilon}_{\sigma}$. Due to this charge transfer interaction, the stability of the intermediate increases (with the concomitant increase in the equilibrium constant K (= $k_a/k_{-a}$)) and also the leaving ability of the thiophenolate leaving group increases (and hence $k_b$ increases) so that the overall rate, $k_n\;=\;Kk_b$, is strongly enhanced. Theoretical support is provided by the natural bond orbital (NBO) analyses at the B3LYP/6-31+$G^{\ast}$ level. The anomaly exhibited by R=Et attests to the stepwise reaction mechanism in which the leaving group departure is rate limiting.

• Journal of the Korean Society of Food Culture
• /
• v.28 no.1
• /
• pp.41-47
• /
• 2013

The purpose of this study is to obtain basic materials to complement the 'time series table serving' by analyzing external color elements. We selected traditional Korean restaurants in two five-star hotels and two famous traditional Korean style restaurants and analyzed their colors and the coloration of the Korean table settings. The results are as follows. By using strong luminosity contrast, restaurant A made its customer focus on the food and used red as the principal point (highlighted) color. Desserts, which have small dimensions, were served in 'Buncheong' ware with 'bakji' method, which has strong contrast; this broke the color balance. The use of small patterned dishes with 'johwa' method would achieve color harmony. Restaurant B used a stronger color for the tables than the foods, making the point color inconspicuous. Lowering the brightness and saturation of the table color would be beneficial. In restaurant C, thick green napkins provided the point color, making the atmosphere of the restaurant dull and dark and interfering with the overall bright atmosphere of the restaurant. Using lower saturation, high luminosity, and yellowish colors would bring harmony to the overall atmosphere. In restaurant D, the point colors were divided into three groups; their diversification during the entire course of the meal made the flow of the meal more natural. However, the use of the violet color, which gives a cold feeling, in the middle of the meal courses broke the overall flow of warm color in the meal. Considering the already-present contrast between red and green, it would be better not to use the violet chrysanthemum in the course of the meal. As mentioned above, there are several issues in terms of the color arrangement, the usage of table pads, and the natural flow of colors. Those issues indicate the necessity for an overall plan for the banquet table set-up in terms of color.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.32-42
• /
• 1990

The method using Rankine Soure distribution over the hull surface and undisturbed free surface was applied to calculate the free surface flow around a ship. The ship hull as well as a local portion of the undisturbed free surface arc geometrically represented by quadrilateral panels and the source density is determined so as to satisfy the linearized free surface condition based on the double model flow. The pressure distribution, wave resistance, wave profile and hydrodynamic sinkage force and trim moment for the Wigley hull and the Series 60 hull with $C_B=0.60$ were calculated in the fixed condition. The calculated results were compared with the measured values. The dependance of the solution on the panel arrangement, particularly on the free suraface, was also studied through 11 numerical test cases for the Wigley hull.

• Journal of Theoretical and Applied Mechanics
• /
• v.3 no.1
• /
• pp.45-65
• /
• 2002

A constitutive model on oorthotropic thermo-elasto-viscoplasticity for fiber-reinforced composite materials Is illustrated, and their thermomechanical responses are predicted with the fully-coupled finite element formulation. The unmixing-mixing scheme can be adopted with the multipartite matrix method as the constitutive model. Basic assumptions based upon the composite micromechanics are postulated, and the strain components of thermal expansion due to temperature change are included In the formulation. Also. more than two sets of mechanical variables, which represent the deformation states of multipartite matrix can be introduced arbitrarily. In particular, the unmixing-mixing scheme can be used with any well-known isotropic viscoplastic theory of the matrix material. The scheme unnecessitates the complex processes for developing an orthotropic viscoplastic theory. The governing equations based on fully-coupled thermomechanics are derived with constitutive arrangement by the unmixing-mixing concept. By considering some auxiliary conditions, the Initial-boundary value problem Is completely set up. As a tool of numerical analyses, the finite element method Is used with isoparametric Interpolation fer the displacement and the temperature fields. The equation of mutton and the energy conservation equation are spatially discretized, and then the time marching techniques such as the Newmark method and the Crank-Nicolson technique are applied. To solve the ultimate nonlinear simultaneous equations, a successive iteration algorithm is constructed with subincrementing technique. As a numerical study, a series of analyses are performed with the main focus on the thermomechanical coupling effect in composite materials. The progress of viscoplastic deformation, the stress-strain relation, and the temperature History are careful1y examined when composite laminates are subjected to repeated cyclic loading.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.257-262
• /
• 2004

A series of preliminary model tests are performed to find out the wave attenuating effect of the pneumatic breakwater of environment friendly type, which is a bubble screen generated by releasing compressed air from a submerged multiple parallel manifold Rising bubbles induce vertical current, which produces horizontal currents flowing away from the bubble-screen area in both directions. Near bottom, the corresponding currents flow toward the bubble screen, thus completing the circulation pattern. The surface current moving against the direction of wave propagation causes some attenuation of the waves. It becomes more effective as the relative depth (d/ L) increases (short-period waves in deep water). With the same air-discharge, the multiple parallel manifold can be more effective for the attenuation of longer waves through optimum arrangement of manifold number. installation depth, manifold gap, etc. The pneumatic breakwater will give a wide utilization as a device for protecting harbor facilities and as a simple, mobile breakwater.