나노 물질의 활용이 증가하면서, 환경 내 나노물질의 독성 및 거동에 관련 연구가 필수적인데, 나노독성평가의 신뢰도를 확보하기 위해서는 노출 배지 내 나노물질의 안정적인 분산방법에 대한 연구가 필요하다. 이에 본 연구에서는 National Institute of Standards and Technology (NIST)에서 제안한 천연유기물을 활용한 나노 분산액 제조 방법을 토대로 화장품 등 다양한 분야에서 널리 사용되고 있는 산화아연 나노입자 생태독성 평가를 위한 분산배지 조제방법을 정립하여 다양한 시험종에 대한 수생태시험 적용성 평가를 수행하였다. 천연유기물을 활용하여 분산성이 향상된 시험배지 내 나노 입자의 분산 안정성을 확인하기 위해 제조 후, 96시간까지의 동적광산란(Dynamic Light Scattering, DLS)측정 결과 입자 크기 분포의 평균값이 약 150-200 nm의 수준을 유지하면서 나노입자의 안정성을 확인할 수 있었다. 이를 통해 천연유기물을 활용하여 금속계 나노물질의 배지 내 분산력을 향상 시키는 방법이 수생태독성시험에 적용 가능성이 높을 것으로 판단되었고, 수생태독성 시험종(어류, 물벼룩, 깔따구, 조류 등)에서의 독성 영향을 확인한 결과 물벼룩 및 깔따구를 이용한 급성 독성 실험에 적합한 것으로 확인되어 향후 나노물질의 수생태독성평가에서 재현성 높은 결과 확보 방안을 도출에 활용할 수 있을 것으로 판단된다.
현재 다양한 종류의 니켈 티타늄 파일 시스템이 근관 치료에 사용되고 있지만, 한 종류의 기구로 복잡한 구조의 근관을 모두 치료하기는 어려운 실정이다. 따라서 여러가지 파일 시스템의 각기 다른 장점을 같이 이용하여 임상에서 더 쉽고, 정확하게 근관 성형을 하기 위해 hybrid method를 사용한다. ProTaper는 초기 근관 확대 효율성이 좋지만 근단부 성형에 여러가지 부적절함이 지적되어왔으며 근래에 이러한 문제점을 보완한 ProTaper Universal이 시판되었다. 본 연구의 목적은 ProTaper 및 ProTaper Universal과 ProTaper Universal의 S-series와 ProFile 혹은 Hero Shaper를 사용한 hybrid method의 근관성형 효율을 비교하는 것이다. 경력 10년의 근관치료전문의가 레진 블록 근관을 한 방법으로 25개씩, 모두 100개를 형성하였다. 근관성형 소요 시간 및 성형 전후의 근관 만곡이나 만곡 반경의 변화, 근관 이형성 여부 및 이미지 중첩을 통해 치근단으로부터 1, 2, 3, 4, 5 mm 위치에서 근관삭제량, 근관중심변위율을 산출, 비교하여 다음과 같은 결과를 얻었다. 1. 시술 시간의 경우, ProFile이 가장 많은 성형 시간을 필요로 하였고, ProTaper Universal이 ProTaper보다 더 빠른 성형 시간을 나타냈다(p < 0.05). 2. 근관 삭제량에 있어서도 ProFile이 가장 적은 삭제량을 나타냈으며, 전반적으로 ProTaper Universal이 ProTaper보다 적은 삭제량을 보였다(p < 0.05). 3. 근관 중심 변위율은 ProFile이 가장 좋은 중심 유지율을 보였으나(p < 0.05), 다른 군은 큰 차이가 발견되지 않았다. 4. 다른 관찰 항목에서도 유의할만한 차이를 보이지 않았다. 이 실험 조건하에, ProTaper Universal이 ProTaper에 비해 성형 시간이나 삭제 폭경 등 성형 효율이 개선된 면이 있는 것으로 판단되며 능숙한 술자의 경우 만곡도가 큰 근관에서 FroTaper Universal이 다양한 파일을 사용하는 hybrid technique만큼 충분한 효율성을 가진 것으로 추정된다.
조사지역은 해안과 인접한 경기도 화성군 석천리에 위치하고 있으며, 그 면적은 약 1$km^2$이다. 이 지역은 기아 자동차 화성공장 건설 이전에 이미 해수침투에 의해 오염된 지역으로 알려져 왔으나, 지구물리적 또는 지구화학적 방법을 통하여 해수침투에 의한 오염분포 현황과 오염의 계속적인 진행 여부가 체계적으로 연구되지 않은 지역이다. 그러므로 본 연구에서는 지구물리적 방법(슐럼버져배열의 전기비저항 수직탐사, 쌍극자-쌍극자배열의 2차원 전기비저항탐사)을 사용하여 해수침투에 의해 오염된 범위 및 해수침투의 주 경로를 파악하고자 하였으며, 또한 해수침투의 진행 여부를 판단할 수 있는 하나의 증거인 조석운동에 의한 해수의 유동을 확인하기 위하여 슐럼버져배열을 사용한 전기비저항 모니터링도 수행하였다. 전기비저항 수직탐사의 결과로부터 조사지역은 2개의 영역, 즉 $\~30$ ohm-m 이하 그리고 그 이상의 전기비저항 분포를 나타내는 영역으로 구분된다. 여기서, $\~30$ ohm-m 이하의 낮은 전기비저항을 보이는 부분은 조사지역의 천부에 존재하는 점토층의 분포와 일치하며, 구 해안선으로 갈수록 점토층의 전기비저항은 매우 낮은 값을 갖는다. 수리 지질학적 분석에 의하면 구 해안선으로부터 약 200 m내에 분포하는 점토층은 해수에 의해 이미 오염되었으며, 이 같은 점토층은 하부에 존재하는 사질층의 전기전도도보다 약 8배 정도 높은 것으로 확인되었다. 북서-남동방향으로 평행하게 설정된 2개의 측선에서 수행된 2차원 전기비저항탐사의 해석 결과에 의하면 구 해안선으로부터 북동방향으로 서로 평행하게 발달된 2개의 가능한 해수침투 경로가 확인되었으며, 그 중 상대적으로 남쪽에 존재하는 침투경로는 심부 80 m이상까지 낮은 전기비저항대가 연장 발달된 것으로 해석되었다. 구 해안선으로부터 내륙으로 약 260 m되는 지점(2차원 전기비저항탐사로부터 심부 80 m 이상까지 연장 발달된 것으로 해석된 침투경로 상의 한 측점)에서 실시한 전기비저항 모니터링 자료에서 조석운동에 의한 12시간의 주기를 갖는 겉보기비저항의 변화를 확인할 수 있었다. 이 같은 사실로 보아 2차원 전기비저항탐사에서 해석된 낮은 전기비저항 이상대는 암반 내에 발달한 파쇄대로서, 조석운동에 의한 해수의 유동통로이며, 이같은 파쇄대를 따라 현재에도 해수침투가 진행되고 있다는 결론을 유추할 수 있다.
인삼이 중추신경계에 대한 작용을 검토하기 위한 일련의 연구로 본 연구에서는 전하 와 마우스를 사용하여 다음과 같은 몇 가지 행동연구를 행하였다. 1) 수면과 일반행동 분석 흰쥐를 사용하여 음식물이 충분한 정상상태와 96∼120시간 굶주린 절식상태에서 나타내는 일반행동을 분석하였다. 정상상태에서 100mg/kg 인삼투여 군은 대조 군에 비해 음식 먹는 회수가 유의성 있게 증가하였고, 반면 몸치장활동이 유의성 있게 감소 되었다, 96∼120시간의 절식상황에서는 두 인삼투여를 모두 대조 군에 비해 이동행동, 탐색행동과 같은 활동성이 유의성 있게 많고 장자기와 같은 무 활동성은 유의성 있게 감소되었다. 2) 조건 회피 반응 흰쥐를 사용하여 왕복 회피형 shuttle box에서 전기충격(VS)을 받지 않고 불빛(CS)에 의해 회피한 조건반응(CR)의 수를 학습의 지표로 삼아, 인삼 사포닌 2.5, 5.0, 50, 및 100mg/kg 투여 군과 식염수 군간에 성적을 비교하였다. 모든 인삼 사포닌투여 군의 성적이 식염수 대조 군에 비해 앞서는 경향이 뚜렷하지만 통계적으로 유의성 있는 경우는 2.5mg/kg경우 뿐이었다. 3) 공격적 정서반응 전기충격을 마우스의 발바닥에 가해 일어난 싸움에 인삼 사포닌이 어떠한 영향을 미치는가를 알아 보았다. 인삼 사포닌을 400 mg/kg로 투여 하면 chlorpromazine 2 mg/kg로 투여한 동물처럼 공격적 행동이 유의성 있게 감소되었다. 그러나 100mg/kg의 경우에는 이렇다 할 변화를 초래하지 못하였다.
기록물의 등록과 기술은 기록물의 생산배경과 업무행위 관련 정보를 제공함과 동시에 그 이용을 가능하게 하고 검색을 편리하게 하는 데 있어 중요한 항목이다. 전자문서체제에서는 기록물이 일정기간 생산기관에서 활용되다가, 준활용단계가 되거나 비활용단계가 되어 기록물을 처리할 때에도 등록시 입력되었던 data 요소들이 그대로 활용되기 때문에, 전자기록체제 하에서 기록물의 등록사항은 과거 어느 때보다 중요한 요소가 되었다. 본고에서는 한국에서의 기록물 등록 및 기술사항을 국제표준과 비교 분석하여 다음과 같이 제안하였다. 우선 등록부분에서는 기본등록단계에 내용기술을 넣어, 첨부여부 쪽수 결재사항 등을 기술하도록 하고, 각기 항목으로 되어 있는 첨부번호, 결재권자, 확인란 등은 생략한다. 세부등록단계에서는 발송방법, 발송등록 분류등록 전체 수정, 특수목록 등을 생략하되, 등록할 필요가 있는 것은 내용기술에서 서술한다. 다음으로 체제 판본 문서링크 적요 등 기록물의 구조와 등록된 체제가 어떤 것인지에 대한 정보 즉 생산맥락 및 링크 등을 등록항목에 넣도록 한다. 기술부분에서는 우선 다층기술을 채택하되, 퐁과 시리즈 계층의 기술을 도입한다. 국제표준정리기술규칙인 ISAD(G)와 ISAAR(CPF)를 적용하여 전거통제 정보 및 비고영역과 마찬가지로 체계와 구조에 관한 정보, 예컨대 기록물의 범위 및 내용, 기술단위의 한도 및 매체, 행정 기관연혁 검색도구 등과 아키비스트의 주기 및 기록물 이력 기록물처리 기록(Documentation)을 기술할 수 있는 새로운 기술표준을 마련하되, 전자기록물 관리에 필수적으로 요구되는 항목들을 편입한다. 또한 제안된 사항을 실행하기 위해 법령개정이나 통합적으로 자동화도니 영구보존기록물관리 시스템을 조정하며, 등록과 기술을 수행할 훈련받은 전문인을 배치한다.
Arbitration means the procedure that a party inquires a third party arbitrator for a resolution on the dispute on certain matters of interest to follow through with the commitment of the arbitration, and a series of procedures performed by the arbitrator of the Korean Commercial Arbitration Board. Arbitration is implemented in accordance with the procedure determined by the Arbitration Act and Arbitration Regulations. In the event the parties reach to the reconciliation during the process of arbitration, the reconciliation is recorded in the form of arbitration award(decision), and in the event a reconciliation is not made, the arbitrator shall make the decision on the particular case. The arbitration award(decision) for reconciliation during the arbitration procedure (Article 31 of Arbitration Act, hereinafter referred to as the 'Act') or the mediation under the Arbitration Regulation of the Korean Commercial Arbitration Board (Article 18 of the Arbitration Regulations) shall have the same effectiveness with the decision rendered by a court that, in the event a party does not perform the obligation, the enforcement document is rendered under the Rules on Enforcement Document on Mediation Statement of various dispute resolution committees of the Supreme Court to carry out the compulsory enforcement. However, in the event that the party to take on the obligation to perform under the arbitration award (decision) rendered by the arbitrator (Article 32 of the Act) does not perform without due cause, a separate enforcement decision in accordance with the procedure determined under the Civil Enforcement Act shall be obtained since the arbitration award(decision) cannot be the basis of enforcement under the Civil Enforcement Act. And, in order to enforce the judgment compulsorily in accordance with the regulations under the Civil Enforcement Act under the foreign arbitration judgment (Article 39 of the A.1), it shall fulfill the requirement determined under the Civil Litigation Act (article 217 of Civil Litigation Act) and shall obtain a separate enforcement decision in accordance with the procedure determined under the Civil Enforcement Act (Article 26 and Article 27 of Civil Enforcement Act) since the arbitration judgment of foreign country shall not be based on enforcement under the Civil Enforcement Act. It may be the issue of legislation not to recognize the arbitration award(decision) as a source of enforcement right, and provide the compulsive enforcement by recognizing it for enforcement right after obtaining the enforcement document with the decision of a court, however, not recognizing the arbitration award(decision) as the source of enforcement right is against Clause 3 of Article 31 of the Act, provisions of Article 35, Article 38 and Article 39 that recognized the validity of arbitration as equal to the final judgment of a court, and the definition that the enforcement decision of a court shall require the in compulsory enforcement under Clause 1 of Article 37 of the Act which clearly is a conflict of principle as well. Anyhow, in order to enforce the arbitration award(decision) mandatorily, the party shall bring the litigation of enforcement decision claim to the court, and the court shall deliberate with the same procedure with general civil cases under the Civil Litigation Act. During the deliberation, the party obligated under the arbitration award(decision) intended to not to undertake the obligation and delay it raises the claim and suspend the enforcement of cancelling the arbitration award(decision) on the applicable arbitration decision within 3 months from the date of receiving the authentic copy of the arbitration award(decision) or the date of receiving the authentic copy of correction, interpretation or additional decision under the Regulation of Article 34 of the Act (Clause 3 of Article 36 of the Act). This legislation to delay the sentencing of the enforcement and then to sentence the enforcement decision brings the difficulties to a party to litigation costs and time for compulsory enforcement where there is a requirement of an urgency. With the most of cases for arbitration being the special field to make the decision only with the specialized knowledge that the arbitrator shall be the specialists who have appropriate knowledge of the system and render the most reasonable and fair decision for the arbitration. However, going through the second review by a court would be most important, irreparable and serious factor to interfere with the activation of the arbitration system. The only way to activate the arbitration system that failed to secure the practicality due to such a factor, is to revise the Arbitration Act and Arbitration Regulations so that the arbitration decision shall have the right to enforce under the Rules on Enforcement Document on Mediation Statement of various dispute resolution committees of the Supreme Court.
A comprehensive numerical study is carried out to investigate for the understanding of the flow evolution and flame development in a supersonic combustor with normal injection of ncumally injecting hydrogen in airsupersonic flows. The formulation treats the complete conservation equations of mass, momentum, energy, and species concentration for a multi-component chemically reacting system. For the numerical simulation of supersonic combustion, multi-species Navier-Stokes equations and detailed chemistry of H2-Air is considered. It also accommodates a finite-rate chemical kinetics mechanism of hydrogen-air combustion GRI-Mech. 2.11[1], which consists of nine species and twenty-five reaction steps. Turbulence closure is achieved by means of a k-two-equation model (2). The governing equations are spatially discretized using a finite-volume approach, and temporally integrated by means of a second-order accurate implicit scheme (3-5).The supersonic combustor consists of a flat channel of 10 cm height and a fuel-injection slit of 0.1 cm width located at 10 cm downstream of the inlet. A cavity of 5 cm height and 20 cm width is installed at 15 cm downstream of the injection slit. A total of 936160 grids are used for the main-combustor flow passage, and 159161 grids for the cavity. The grids are clustered in the flow direction near the fuel injector and cavity, as well as in the vertical direction near the bottom wall. The no-slip and adiabatic conditions are assumed throughout the entire wall boundary. As a specific example, the inflow Mach number is assumed to be 3, and the temperature and pressure are 600 K and 0.1 MPa, respectively. Gaseous hydrogen at a temperature of 151.5 K is injected normal to the wall from a choked injector.A series of calculations were carried out by varying the fuel injection pressure from 0.5 to 1.5MPa. This amounts to changing the fuel mass flow rate or the overall equivalence ratio for different operating regimes. Figure 1 shows the instantaneous temperature fields in the supersonic combustor at four different conditions. The dark blue region represents the hot burned gases. At the fuel injection pressure of 0.5 MPa, the flame is stably anchored, but the flow field exhibits a high-amplitude oscillation. At the fuel injection pressure of 1.0 MPa, the Mach reflection occurs ahead of the injector. The interaction between the incoming air and the injection flow becomes much more complex, and the fuel/air mixing is strongly enhanced. The Mach reflection oscillates and results in a strong fluctuation in the combustor wall pressure. At the fuel injection pressure of 1.5MPa, the flow inside the combustor becomes nearly choked and the Mach reflection is displaced forward. The leading shock wave moves slowly toward the inlet, and eventually causes the combustor-upstart due to the thermal choking. The cavity appears to play a secondary role in driving the flow unsteadiness, in spite of its influence on the fuel/air mixing and flame evolution. Further investigation is necessary on this issue. The present study features detailed resolution of the flow and flame dynamics in the combustor, which was not typically available in most of the previous works. In particular, the oscillatory flow characteristics are captured at a scale sufficient to identify the underlying physical mechanisms. Much of the flow unsteadiness is not related to the cavity, but rather to the intrinsic unsteadiness in the flowfield, as also shown experimentally by Ben-Yakar et al. [6], The interactions between the unsteady flow and flame evolution may cause a large excursion of flow oscillation. The work appears to be the first of its kind in the numerical study of combustion oscillations in a supersonic combustor, although a similar phenomenon was previously reported experimentally. A more comprehensive discussion will be given in the final paper presented at the colloquium.
This article was intended to survey whether Roy' Adapation model ('Roy Model') can be applied to family health assessment and to study whether application of the Roy Model to a Korean family is feasible. under the Roy Model, a family is viewed as an adaptation system having a series of process of input. process, feedback, and output. Further, the Roy Model indicates that a family contains Physiolosical, self-concept. role function and interdependent mode in respect of internal or external stimuli. In the event where the family health assessed, the adaptation mode of that family must be assess at the first stage. Then, the focal, contextual, residual stimuli affecting the family must be assessed. In 1984 Hanson suggested four types of family adaptation mode based upon the Roy Model and thereby enhanced the possibility for family health assessment. In order survey whether the Roy Model can be applied to the Korean family, the author of this article contracted adults of 169 who live in 'A' city to make open questions regarding family and then analyzed responses from them by utilizing Roy model. This study categorized family Adaptation mode based upon the' four types of family adaptation mode developed by Hanson. As a result of this study, family adaptation mode was categorized into 117 concepts. Those 117 concepts are consisted or Physiolosical mode of 47. selfconcept mode of 56, role function mode of 9 and interdependent mode of 5. Further. stimuli affecting family were classified based upon Roy's definition as to three types of stimuli. Stimuli on a family are comprised focal stimuli concept of 19, contextual stimuli concepts of 19, one residual stimuli concept. this result implies that the Roy's Model can be applied to Korean family. Physiological mode shows meaning of survival. while self-concept mode reflects meaning of growth and emphasizes harmony among the family based on the familism. The role function mode shows continuity rather control of family member. By contrast, interdependent mode shows interaction with community to which the family belongs. but the degree of interaction does not appear too high. The analysis of family stimuli led this study to conclude that troubles within a family. changes in family structure and diease of family member generate stimuli. However, an application of the Roy Model contains the following problems: First, Roy argued that the family adaptation mode should be assessed at the first level family health assessment and then stimuli affecting family adaptation should be adaptation assessed at the second stage. To the belief of the author of this article. however, for checking family adaptation level. focal, contextual, residual stimuli should be confirmed by assessing stimuli at first stage. Then, the family adaptation mode in respect of such stimuli should be assessed. The rationale for this is that the family adaptation level is determined depending on degree of strength of focal. contextual. residual stimuli. Second. Whall (1991) raised a question 'Does one assess family adaptation mode and intervene in the stimuli?' 'Likewise, assessment of the family adaptation should be made in the following manner in order for family health to be enhanced. Third. Roy believes that additional stimuli (such as contextual and residual) are same as internal process (including nurturance. support, and socialization). However, the basis for this Roy's belief is not too clear. In spite of these problems which the author indicated above, it can be concluded that the Roy Model can serve as a good device for an assessment of family health and that the Roy Model can be applied to a Korean family. Finally, further research of family adaptation theory and family nursing theory is required for a development of these theories.
북서태평양에서 발생하는 열대 저기압의 이동경로에 대한 변화패턴을 1951-2007년의 열대 저기압 경로 자료에 경험적 직교함수(Empirical Orthogonal Function, EOF)법을 적용하여 분석하였다. 북서태평양을 $5^{\circ}\times5^{\circ}$의 격자간격으로 나뉘어 연별 열대 저기압의 이동빈도를 각 격자에서의 변수로 정의하였다. 첫번째 모드는 동서성분(동경125도 기준)을, 두번째 모드는 남북성분(필리핀 동쪽해상에서 남지나해를 가로지르는 축 중심)을, 그리고 세번째 모드는 대각성분(타이완 동쪽 해상을 중심으로 동북방향과 동남방향을 축으로 하는)으로 나누어짐을 알 수 있었다. 첫번째와 두번째 모드의 주성분 시계열에서 각각 1997년과 1991년 부근을 기점으로 해서 주성분들의 부호가 교차되는 데, 이는 1990년대 이전 약 20년 동안에 남중국해 부근지역에서의 열대 저기압 이동 빈도가 동아시아 중위도 지역에서는 최근 20년 동안에 더 높았던 것과 관련성이 있는 것으로 보였다. 열대 저기압 발생의 경우, 첫번째와 두번째 모드에서 고유벡터 값이 음이고 진로가 북서태평양으로 주로 이동했던 열대 저기압은 고유벡터가 양의 값을 보였던 열대 저기압보다 더 동쪽에서 발생했던 것으로 나타났다. 이동특성에 있어 첫번째 모드는 바이칼호 남쪽에서 형성되는 기압 패턴에, 두번째 모드는 $30^{\circ}N$ 부근을 중심으로 남과 북 사이에 형성된 진동패턴에, 세번째 모드는 일본 부근에 위치한 기압패턴에 의해 열대 저기압의 이동경향이 많은 영향을 받는 것을 알 수 있었다. 또한, 해수면 온도 아노말리 값과 상관분석결과 첫번째 모드는 $Ni\tilde{n}o$-3.4 지수와 높은 음의 상관관계를 보여 ENSO의 영향을 받고 있음을 알 수 있었다.
한국에너지기술연구원에서는 중온 ($700{\sim}800^{\circ}C$) 작동용 연료극 지지체 평관형 SOFC 스택을 구성하는 단위 번들을 개발했다. 연료극 지지체 평관형 셀은 Ni/YSZ 서밋 연료극 지지체 튜브, 8몰% $Y_2O_3$ stabilized $ZrO_2$ (YSZ) 전해질, $LaSrMnO_3$ (LSM)과 LSM-YSZ composite 및 $LaSrCoFeO_3(LSCF)$로 구성된 다중층 공기극으로 구성됐다. 제조된 연료극지지체 평관형 셀은 유도 브레이징 법에 의해 페리틱 (ferritic) 금속 캡에 접합됐고, 공기극의 전류집전을 위해 공기극 외부에 Ag 선 및 $La_{0.6}Sr_{0.4}CoO_3(LSCo)$ paste를 이용했으며, 연료극의 전류집전은 Ni felt, wire, 그리고 paste를 이용했다. 단위 번들을 만들기 위한 연료극 지지체 평관형 셀의 반응 면적은 셀 당 $90\;cm^2$ 이었으며, 2개의 셀이 병렬로 연결되어 1개의 단위 번들이 됐고, 총 12개의 단위 번들이 직렬로 연결되어 스택을 구성한다. 공기 및 3%의 가습된 수소를 산화제 및 연료로 사용한 단위 번들의 운전 결과 최대 성능은 $800^{\circ}C$에서 $0.39\;W/cm^2$의 출력이 나타났다. 본 연구를 통해 연료극 지지체 평관형 SOFC 셀의 기본 기술과 KIER 만의 독특한 연료극 지지체 평관형 SOFC 스택을 구성하는 단위 번들의 개념을 확립할 수 있었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.