• 조명전기설비학회논문지
• /
• 제27권7호
• /
• pp.67-75
• /
• 2013

In this paper, parallel input/serial output dual converter is designed appropriately for fuel cell hybrid power system. In case of proposed converter, zero voltage switching condition is designed without additional resonance device using leakage inductance of transformer and output capacitance of switch, and zero voltage switching method is used. Also, the system method is for increasing power by connecting half-bridge in parallel and increasing output voltage by connecting secondary output of transformer in serial. Through this method we can increase power and decrease volume of system. So in this paper, dual converter is designed. 1.5kW fuel cell hybrid power system was implemented, and system operation and stability was verified through experiment.

• KIEE International Transactions on Power Engineering
• /
• 제5A권4호
• /
• pp.378-384
• /
• 2005

This paper proposes a new series and parallel Sin+Cos PSS (power system stabilizer) for the purpose of improving the existing PSS1A's performance. The purpose of the PSS is to enhance the damping of power system oscillations through injection of auxiliary signals for an excitation control terminal. The proposed series and parallel Sin+Cos PSS is connected adding the Sin+Cos terms additionally with the serial and parallel connection in a conventional PSS1A. The proposed controller is aimed at considering the damping of oscillation when it changes parameter fluctuations or operational load variations in a power system. The electric power system used is the KEPCO system and the voltage of the power transmission line is 154kV and 345kV. The PSCAD/EMTDC package is used to authorize the effect of the proposed controller. Simulations were shown by and compared with the waveforms for frequency, voltage and electric power.

• 한국통신학회논문지
• /
• 제21권11호
• /
• pp.2991-3000
• /
• 1996

이 논문에서는 DS/SS 통신 시스팀에서의 초기 동기를 위한 효율적인 신경 시스팀이 제시된다. 이 시스팀은 주어진 의사잡음 수열을 이진 필드에서 기하학적으로 분석하여 학습하는 이진 신경회로망을 사용한다. 주어진 시스팀에서의 검출 확률과 오경보 확률을 얻고 실제 모의 시험과 비교하여 구한 식을 검증한다. 또한 초기 동기 시간의 식이 유도되고 직렬 탐색의 2중 적분 시간과 비교하여 더욱 나은 성능을 가짐을 보인다. 또한 동기 수열의 길이와 갯수에 따른 시스팀의 성능을 분석하여 동기 수열의 길이를 늘릴수록, 동기 수열의 갯수를 늘릴수록 성능이 향상됨을 보인다.

• Smart Structures and Systems
• /
• 제13권4호
• /
• pp.711-730
• /
• 2014

In this paper the system dynamic influences in actuators with variable stiffness as contemporary used in robotics for safety and efficiency reasons are investigated. Therefore, different configurations of serial and parallel elasticities are modeled by dynamic equations and linearized transfer functions. The latter ones are used to identify the characteristic behavior of the different systems and to study the effect of the different elasticities. As such actuation concepts are often used to reach energy-efficient operation, a power consumption analysis of the configurations is performed. From the comparison of this with the system dynamics, strategies to select and control stiffness are derived. Those are based on matching the natural frequencies or antiresonance modes of the actuation system to the frequency of the trajectory. Results show that exclusive serial and parallel elasticity can minimize power consumption when tuning the system to the natural frequencies. Antiresonance modes are an additional possibility for stiffness control in the series elastic setup. Configurations combining both types of elasticities do not provide further advantages regarding power reduction but an input parallel elasticity might enable for more versatile stiffness selection. Yet, design and control effort increase in such solutions. Topologies incorporating output parallel elasticity showed not to be beneficial in the chosen example but might do so in specific applications.

• 대한의용생체공학회:의공학회지
• /
• 제10권1호
• /
• pp.33-42
• /
• 1989

도플러 효과는 혈관의 혈류속도를 측정하는데 이용된다. 대부분의 도플러 시스템은 측정위치에 대한 정보를 제공하는 펄스 도플러 시스템이다. 본 논문에서는 2차 샘플링 방식과 직렬 신호 처리를 이용한 새로운 2차원 펄스 도플러 시스템을 제안한다. 제안된 시스템은 직각 위상 검파 방식에서 동상과 $90^{\circ}$ 지연된 위상신호의 불평형성을 해결하고, 또한 직렬 신호 처리를 사용하므로서 2차원 도플러 시스템에서의 채널 간의 평형성 문제를 해결했다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.29-32
• /
• 2000

In this paper, we present an extension of the multi-code CDMA (code division multiple access) systems based on bi-orthogonal modulation by employing a convolutional encoder and an interleaver before serial-to-parallel conversion in the modulator. Bandwidth expansion by the convolutional encoder can be compensated for by the bi-orthogonal modulation, and the interleaver in the system scrambles the convolutionally encoded data bits so that, after serial-to-parallel conversion, each code channel conveys those bits far apart in time. The result is that the proposed system with several order of magnitude less implementational complexity, achieves quite close performance of the conventional systems comprised of Walsh modulation and multiple convolutional encoders and interleavers in all the code channels.

• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.341-350
• /
• 2005

In this study, fault diagnosis and monitoring of serial wound pre-engaged starter motors have been carried out. Starter motors are DC motors that enable internal combustion engine (ICE) to run. In case of breakdown of a starter motor, internal combustion engine can not be worked. Starter motors have vital importance on internal combustion engines. Kohonen network based fault diagnosis system is proposed for fault diagnosis and monitoring of starter motors. A graphical user interface (GUI) software has been developed by using Visual Basic 6.0 for fault diagnosis. Six faults, seen in starter motors, have been diagnosed successfully by using the developed fault diagnosis system. GUI software makes it possible to diagnose the faults in starter motors before they occur by keeping fault records of past occurrences.

• Structural Engineering and Mechanics
• /
• 제16권1호
• /
• pp.83-99
• /
• 2003

The aim of this paper is to develop the ISCOSTFUN (Intelligent System for Prediction of Concrete Strength by Functional Networks) in order to provide in-place strength information of the concrete to facilitate concrete from removal and scheduling for construction. For this purpose, the system is developed using Functional Network (FN) by learning functions instead of weights as in Artificial Neural Networks (ANN). In serial functional network, the functions are trained from enough input-output data and the input for one functional network is the output of the other functional network. Using ISCOSTFUN it is possible to predict early strength as well as 7-day and 28-day strength of concrete. Altogether seven functional networks are used for prediction of strength development. This study shows that ISCOSTFUN using functional network is very efficient for predicting the compressive strength development of concrete and it takes less computer time as compared to well known Back Propagation Neural Network (BPN).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.68.4-68
• /
• 2001

In the area of factory automation (FA), a lot of researches are being executed about intelligent system using network. Conventional industry controllers are implemented the connection with other controllers by using asynchronous serial communications. These methods of communication have an advantage of easy implementation but have disadvantages of lack of real-time characteristics needed in motion control, slow baud rate too low to exchange required data sufficiently and low integrity because of different communication protocol. Serial real-time communication system (SERCOS) provides international standard communication specifications (IEC 61491) for interfacing between control units and drives from different manufacturers, has real-time ...

• 한국광학회지
• /
• 제5권2호
• /
• pp.212-216
• /
• 1994

원적외선 영역인 $8-12.\mu$m 대역의 열상장비 주사광학계를 설계 제작하였다. 검출기로 5개 소자의 SP-RITE HgCdTe를 사용하는 직병렬 주사를 위해 수평 및 수직주사에는 각각 회전다면거울과 진동평면거울을 사용하였으며, 주사연결거울로는 구면거울을 사용하여 주사거울의 크기 및 입사동에서의 동수차를 최소화 하였다. 주사광학계는 $40^{\circ}\times26.67^{\circ}$의 넓은 주사시야를 갖는다. 회절 변조전달함수의 계산결과 회절한계의 성능을 만족하였으며 제작 및 시험 결과 고분해능의 열영상을 얻을 수 있었다.