• 제목/요약/키워드: sequential-rotation technique

검색결과 11건 처리시간 0.026초

Design of Microstrip Array Antenna with Three-Element Sequential-Rotation Subarray for DBS

  • Jin, Kyung-Soo;Shin, Hye-Jung;Park, Byong-Woo
    • Journal of electromagnetic engineering and science
    • /
    • 제2권1호
    • /
    • pp.28-33
    • /
    • 2002
  • The LHCP circularly polarized antenna operating at DBS band is developed by employing the sequential-rotation technique in which each subarray is comprised the three truncated-corner patch square element. Antenna designed with sequentially-related technique whose M=3, p=2 has the effect of improved axial-ratio bandwidth, cross-polarization etc. And it is proved that the degradation of radiation pattern can be reduced significantly by minimizing the radiation loss of feeding line structure. Antenna designed shows extremely low side lobe level of below - 25 dB in the diagonal plane and cross-polarization level of below -20 dB in the all plane. And these performances comply with the array antenna specification for DBS.

모노펄스 급전 구조를 갖는 Ka 대역 우회선 원편파 마이크로스트립 패치 배열 안테나 설계 및 제작 (Design and Fabrication of Right Hand Circular Polarization Microstrip Patch Array Antenna for Ka Band with Mono-Pulse Feed)

  • 배기형
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
    • /
    • pp.297-302
    • /
    • 2005
  • Right hand circularly polarized Ka band microstrip patch array antenna was designed, manufacture and measurement were carried out. In order to lower axial ratio performance sequential rotation array technique was used. With mono-pulse feed There are sum and delta channel. Waveguide to microstrip transition was used. The 512 array antenna was performed which axial ratio is about 1.ldB in the half power beam width and also 1.ldB at the normal direction. Directivity gain of designed antenna is 32dB.

  • PDF

순차적 순환배열을 이용한 고온초전도 배열 안테나 설계 및 특성해석 (Design and Characterization of HTS antenna array with sequential rotation array)

  • 정동철;황종선;김영민;최효상
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
    • /
    • pp.77-81
    • /
    • 2006
  • We report the performance of a four-element, 11.67 GHz, high-Tc superconducting (HTS) microstrip antenna array with corporate feed network and circular polarization for direct broadcasting satellite (DBS) system. Our array antennas were designed and built on a 0.5 mm thick MgO substrate. To compare the superconducting antennas with normal conducting counterpart, One antenna pattern was fabricated from gold thin film, and a second pattern was fabricated from $YBa_2Cu_3O_{7-x}$ (YBCO) superconducting thin film. To improve the axial ratio of circularly polarized arrays, sequential rotation technique were used. Efficiency, radiation pattern, return loss and bandwidth were measured for both antennas at room temperature and at cryogenic temperature. The array produced good circular polarization, and the gain of the array at 77 K, relative to a copper array at room temperature was approximately 1.54 dB. The measured return loss of our HTS antenna array was 35.79 dB at the resonant frequency of 11.67 GHz and The total effective bandwidth was about 3.4 %. The results showed that high-temperature superconductors, when used in microstrip arrays, improved the efficiency of the HTS antenna array for circularly polarization.

  • PDF

시계열 해석을 이용한 팔운동 근전신호의 기능분리 (Functional Separation of Myoelectric Signal of Human Arm Movements Using Time Series Analysis)

  • 홍성우;남문현
    • 대한전기학회논문지
    • /
    • 제41권9호
    • /
    • pp.1051-1059
    • /
    • 1992
  • In this paper, two general methods using time-series analysis in the functional separation of the myoelectric signal of human arm movements are developed. Autocorrelation, covariance method and sequential least squares algorithm were used to determine the model parameters and the order of signal model to describe six arm movement patterns` the forearm flexion and extension, the wrist pronation and supination, rotation-in and rotation-out. The confidence interval to classify the functions of arm movement was defined by the mean and standard deviation of total squared error. With the error signals of autoregressive(AR) model, the result showed that the highest success rate was obtained in the case of 4th order, and success rate was decreased with increase of order. Autocorrelation was the method of choice for better success rate. This technique might be applied to biomedical and rehabilitation engineering.

  • PDF

자기회귀 모델을 이용한 팔 운동 근전신호의 기능분리 (Functional Separation of Myoelectric Signal of Human Arm Movements using Autoregressive Model)

  • 홍성우;손재현;서상민;이은철;이규영;남문현
    • 전자공학회논문지B
    • /
    • 제30B권4호
    • /
    • pp.76-84
    • /
    • 1993
  • In this thesis, general method using autoregressive model in the functional separation of the myoelectric signal of human arm movements are suggested. Covariance method and sequential least squares algorithm were used to determine the model parameters and the order of signal model to describe six arm movement patterns` the forearm flexion and extension, the wrist pronation and supination, rotation-in and rotation out. The confidence interval to classify the functions of arm movement was defined by the mean and standard deviation of total squares error. With the error signals of autoregressive(AR) model, the result showed that the highest success, rate was abtained in the case of 4th order, and success rate was decreased with increase of order. This technique might be applied to biomedical-and rehabilitation-engi-neering.

  • PDF

HTS Broadband-Array Antenna for Satellite Communication

  • 정동철
    • Progress in Superconductivity
    • /
    • 제3권2호
    • /
    • pp.178-182
    • /
    • 2002
  • Superconducting four-element patch array antenna was designed and fabricated using $high-T_{c}$ superconducting (HTS) thin film. The array antenna has single-feed circularly polarization and a resonance frequency of 11.85 GHz fur satellite communication system. To fabricate this antenna $YBa_2$$Cu_3$$O_{7-x}$(YBCO) superconducting thin films were deposited using rf-magnetron sputtering technique. Sequential rotation technique based on radiation elements($0^{\circ}$ , $90^{\circ}$, 1$80^{\circ}$, $270^{\circ}$ phase delay) was utilized to achieve circularly polarization. Simulated and measured results, the analysis on resonant frequency(fr), return loss, and bandwidth are presented. The results show that 10 dB return loss bandwidth of the array antenna is 11.04 GHz~12.59 GHz (13.15%) and 3dB axial ratio bandwidth is 11.42~12.52 GHz (9.2%).).).

  • PDF

64 채널 Multi-Detector Computed Tomography를 이용한 관상동맥검사의 선량 : 검사 프로토콜 다변화에 따른 환자선량 감소 (Doses of Coronary Study in 64 Channel Multi-Detector Computed Tomography : Reduced Radiation Dose According to Varity of Examnination Protocols)

  • 김문찬
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제32권3호
    • /
    • pp.299-306
    • /
    • 2009
  • MDCT의 시간분해능 향상과 등방성 해상능(isotrophic resolution) 영상의 획득, 그리고 지능적인 심전도 동조를 바탕으로 하여 심혈관 질환의 효과적인 진단검사로 인정받고 있는 후향적 심전도 동조화(retrospective ECG gating) 하의 coronary CT angiography는 상대적으로 많은 환자선량을 제공함으로 인해 우수한 진단방법으로서의 장점을 반감시키고 있다. 이에 각 장치 제조사에서는 환자선량을 감소시키는 방법의 연구가 활성화되어 왔으며, 이의 일환으로 지능적인 cardiac dose modulation 기술과 전향적 심전도 동조화(prospective ECG gating)를 사용한 sequential scan이 도입되고 있다. 이에 본 연구에서는 64 채널 MDCT에서 54 kg, 163 cm인 여성 인체모형팬텀을 대상으로 하고 형광유리선량계를 사용하여 후향적 심전도 동조화 하의 coronary CT angiography 프로토콜에서 환자선량의 정량적 평가와 환자선량 감소를 위해 본원에서 선택적으로 적용하고 있는 5가지 검사 프로토콜을 적용하였을 경우의 effective dose와 중요 부위의 organ dose를 측정 비교하여 다음과 같은 결과를 얻었다. 1) Dose modulation없이 120 kVp와 210 mAs의 노출조건으로 retrospectively ECG gated helical scan으로 시행한 conventional coronary CT angiography 프로토콜의 effective dose는 17.8 mSv였으며, 심장의 organ dose는 103.8 mGy였다. 2) 관전압을 120 kVp에서 100 kVp로 낮추었을 경우 effective dose는 11.0 mSv로 conventional coronary CT에 비해 38.2%가 감소하였으며, 심장은 67.3 mGy로 45.2%가 감소하였다. 3) Cardiac dose modulation을 적용한 경우 effective dose는 13.3 mSv로 conventional coronary CT에 비해 25.3%가 감소하였으며, 심장은 80.0 mGy로 22.9%가 감소하였다. 4) 100 kVp의 저관전압과 cardiac dose modulation을 적용한 경우 effective dose는 8.1 mSv로 conventional coronary CT angiography에 비해 54.5%가 감소하였으며, 심장은 49.5 mGy로 52.3%가 감소하였다.

  • PDF

삼각형 격자를 갖는 순차 회전 배열 안테나의 설계 (Design of Sequentially-Rotated Array Antenna with Triangular Lattice)

  • 진경수;정치현;박병우
    • 한국전자파학회논문지
    • /
    • 제11권7호
    • /
    • pp.1282-1290
    • /
    • 2000
  • 모서리-절단 사각형 패치를 격자 형태로 배열하고 순차 회전 기법을 이용하여 위성방송수신 대역에서 동작하는 LHCP 원형 편파 안테나를 설계한다. 삼각형 격자 현태의 순차 회전 기법을 사용한 안테나는 축비 대역폭, 교차 편파 특성등을 개선하는 효과가 있으며, 급전 선로에 의한 방사를 최소로 하여 방사 패턴에 미치는 영향을 줄일 수 있다. 설계된 안테나는 $\Phi$45$^{\circ}$평면에서 DBS 배열 안테나의 부엽 준위 규격(-27dB)과 교차 편파 준위(-20dB)를 만족하고 있다.

  • PDF

직접 위성방송 수신용 원편파 HTS 배열 안테나 관한 연구 (Study on HTS Antenna Array with Circularly Polarization for DBS Receiver)

  • 정동철;윤창훈;최효상
    • 한국전기전자재료학회논문지
    • /
    • 제17권7호
    • /
    • pp.776-781
    • /
    • 2004
  • We report the performance of a four-element, 11.67 GHz, $high-{T}_c$ superconducting (HTS) microstrip antenna array with corporate feed network. The HTS antenna array used in this work had a circular polarization for direct broadcasting satellite (DBS) system. Our array antennas were designed and built on a 0.5 mm thick MgO substrate. To compare the superconducting antennas with normal conducting counterpart, One antenna pattern was fabricated from gold thin film, and a second pattern was fabricated from ${YBa}_2{Cu}_3{O}_7-x(YBCO)$ superconducting thin film. To improve the axial ratio of circularly polarized arrays, sequential rotation technique were used. Efficiency, radiation pattern, return loss and bandwidth were measured for both antennas at cryogenic temperature and room temperature. The array produced good circular polarization, and the gain of the array at 77 K, relative to a copper array at room temperature was approximately 1.54 dB. The measured return loss of our HTS antenna array was 35.79 dB at the resonant frequency of 11.67 GHz and The total effective bandwidth was about 3.4 %. The results showed that high-temperature superconductors, when used in microstrip arrays, improved the efficiency of the HTS antenna array for circularly polarization.

원형편파의 축비 대역폭 개선을 위한 직렬 급전 십자개구 결합 마이크로스트립 안테나 (A Series Feeding Cross-Aperture Coupled Microstrip Antenna for Improving Axial Ratio Bandwidth of Circular Polarization)

  • 김형락;윤영중
    • 한국전자파학회논문지
    • /
    • 제13권4호
    • /
    • pp.393-400
    • /
    • 2002
  • 본 논문에서는 원형편파를 발생시키기 위한 여러 가지 방법 중 단일 급전 십자개구 결합 방식이 가지는 협대역의 축비 대역폭을 개선하기 위해 단일 급전으로 하이브리드 급전의 효과를 가져을 수 있는 직렬 급전 십자개구 결합 마이크로스트립 안테나를 제안하고, 기존에 발표된 단일 급전 십자개구 결합 안테나와의 축비 대역폭, 이득, 방사패턴, 그리고 임피던스 대역폭 등과 비교하여 개선된 축비 대역폭 특성을 제시하여 제안된 안테나의 타당성을 보였다. 또한 제안된 단일 안테나를 이용해 2$\times$2 배열 안테나로 확장하는 과정에서 시퀀셜 로테이션 기법을 적용함으로써 더욱 넓은 축비 대역폭을 화보할 수 있도록 하였다. 직렬급전 단일 안테나와 2$\times$2 배열 안테나의 측정된 축비 대역폭은 110 MHz(4.6 %)와 420 MHz(17.5 %)를 보였고, 측정된 임피던스 대역폭 (VSWR<1.5)은 240 MHz(10%)와 500 MHz(20.8%)출 가졌으며, 이득 측정결과에서는 단일 안테나와 2$\times$2 배열 안테나 모두 3 dB 이득 대역폭에서 400 MHz(16.7%) 이상의 평탄 특성을 가지며 최대이득에서는 8.2 ㏈i와 12.5 ㏈i의 이득특성을 보여주었다.