• 제목/요약/키워드: sequential properties

검색결과 274건 처리시간 0.031초

Surface gloss, gloss retention, and color stability of 2 nano-filled universal resin composites

  • Gustavo Fabian Molina;Ricardo Juan Cabral;Ignacio Mazzola;Michael Burrow
    • Restorative Dentistry and Endodontics
    • /
    • 제47권4호
    • /
    • pp.43.1-43.13
    • /
    • 2022
  • Objectives: This study compared the surface gloss (SG), gloss retention (GR), and color stability (CS) of 2 universal resin composites after chemical (CA) and mechanical (MA) aging. Materials and Methods: Twenty disc-shaped samples of G-ænial A'Chord (GC-Europe) and Filtek Universal (3M-ESPE) were polished with sequential abrasive papers. For CA, specimens were stored in 1 mL of 75% ethanol for 15 days at 37℃, and readings (SG, GR, and CS) were obtained at baseline and 5, 10, and 15 days. For MA, specimens were subjected to 10,750 simulated brushing cycles. SG and CS were evaluated after every 3,583 cycles. SG was measured with a glossmeter (geometrical configuration: 60°), and values were expressed in gloss units. Color was measured with a spectrophotometer using the CIE-L*a*b* color system. The Student's t-test, 1-way analysis of variance, and Scheffé test were used for statistical analysis (α = 0.05). Results: G-ænial presented significantly higher SG values than Filtek (p = 0.02), with GR reductions of 5.2% (CA) and 5.3% (MA) for G-ænial and 7.6% (CA) and 7.2% (MA) for Filtek. The aging protocol had no statistically significant effect on SG or GR (p = 0.25) from baseline to the final readings. G-ænial-MA presented the lowest color difference (ΔE = 1.8), and G-ænial-CA and Filtek-CA had the largest changes (ΔE = 8.6 and ΔE = 11.8, respectively). Conclusion: G-ænial presented higher SG values and better CS. Both restorative materials demonstrated acceptable GR and CS. Aging protocols impacted these properties negatively.

A Study on Programming Concepts of Programming Education Experts through Delphi and Conceptual Metaphor Analysis

  • Kim, Dong-Man;Lee, Tae-Wuk
    • 한국컴퓨터정보학회논문지
    • /
    • 제25권11호
    • /
    • pp.277-286
    • /
    • 2020
  • 이 연구의 목적은 전문가 집단을 대상으로 프로그래밍 교육에 필요한 프로그래밍 개념의 구성원을 도출하여 학습자의 개념화를 돕는데 있다. 이를 위해 변수, 연산자, 제어 구조 등의 프로그래밍 요소를 질적 연구 방법인 개념적 메타포 분석 방법을 적용하여 프로그래밍 교육 전문가 집단이 형성한 개념의 전형적 속성을 확인하고 델파이 연구 방법을 통해 타당성을 확보하였다. 이 연구의 결과로 프로그래밍 개념의 전형적 속성 17가지를 도출하였다. 이를 바탕으로 내린 결론은 프로그래밍 교육에서 학습자가 1)변수 개념은 데이터를 저장하는 방법, 이름을 정하는 방법, 변수의 주소가 갖는 의미, 값을 변하게 하는 방법, 변수의 다양한 형태, 변수가 갖는 크기의 의미 등, 2)연산자 개념은 사칙 연산 방법, 논리적인 처리 방법, 우선순위에 따른 연결 방법, 연산 기호의 의미, 비교하는 방법 등, 3)제어 구조 개념은 실행 흐름 제어 방법, 참/거짓으로 논리적 판단 방법, 실행 규칙 설정 방법, 선택적 실행 방법, 순차적 실행의 의미, 반복적 실행 방법 등을 이해하도록 교육 내용을 보다 구체적으로 설정해야 한다는 것이다.

고속충돌 시험용 지능형 다중 카메라 시스템 개발 (Development of Intelligent Multiple Camera System for High-Speed Impact Experiment)

  • 정동택;박치영;진두한;김태연;이주연;이인석
    • 대한기계학회논문집A
    • /
    • 제37권9호
    • /
    • pp.1093-1098
    • /
    • 2013
  • 방탄소재로서 사파이어 재료가 대두되고 있지만 고속 충돌관련 동적거동 및 파괴특성에 관한 연구는 부족한 실정이다. 탄자와 취성세라믹재료간의 상호작용을 연구하기 위해서는 고화질의 초고속 연속영상이 필수적이다. 본 연구에서는 고속충돌 및 관통 현상을 순차적으로 촬영할 수 있는 장치를 개발하였다. 이 장치는 속도측정장치, 마이크로프로세서를 사용한 카메라 구동장치 그리고 다수의 CCD카메라로 이루어져있다. 선형배열센서를 사용한 속도측정장치는 직경 1-2 mm 탄자의 마하 3 속도를 측정할 수 있다. 발사된 탄자가 속도측정장치를 통과하면 속도와 시간이 측정되고 탄자가 비행하는 동안 카메라 구동장치가 정확한 충돌시간을 계산하여 다수의 카메라에 순차적으로 트리거 신호를 보내서 충돌 전후의 형상을 순차적으로 촬영한다. 정확한 충돌시간 예측을 못하면 고해상도의 사진촬영이 거의 불가능하다. 본 연구에서 개발된 정밀 촬영장치를 사용하여 고해상도의 영상을 확보할 수 있었다.

3차원 영상복원 데이터를 이용한 HMM 기반 의도인식 시스템 (HMM-based Intent Recognition System using 3D Image Reconstruction Data)

  • 고광은;박승민;김준엽;심귀보
    • 한국지능시스템학회논문지
    • /
    • 제22권2호
    • /
    • pp.135-140
    • /
    • 2012
  • 대뇌 상의 mirror neuron system은 시각 정보에 기반한 모방학습 기능을 담당한다. 관측자의 mirror neuron system 영역을 관찰할 때, 행위자가 수행하는 목적성 행위의 전체가 아닌, 부분적으로 가려지거나 보이지 않는 영역을 포함하는 경우에도 해당 영역의 뉴런이 발화되는 과정을 통해 전체 행동의 의도를 유추할 수 있다. 이러한 모방학습 기능을 3D 비전 기반 지능 시스템에 적용하는 것이 본 논문의 목표이다. 본 연구실에서 선행 연구된 스테레오 카메라를 기반으로 획득된 3차원 영상에 대한 복원을 수행한다. 이 때 3차원 입력영상은 부분적으로 가려진 영역을 포함하는 손동작의 순차적 연속영상이다. 복원 결과를 기반으로 가려진 영역을 내포한 행위에 대하여 LK optical flow, unscented Kalman filter를 이용한 특징검출을 수행하고 의도인식의 수행을 위해, Hidden Markov Model을 활용한다. 순차적 입력데이터에 대한 동적 추론 기능은 가려진 영역을 포함한 손동작 인식 수행에 있어 적합한 특성을 가진다. 본 논문에서 제안하는 의도 인식을 위해 선행 연구에서 복원 영상에서의 객체의 윤곽선 및 특징 검출을 시뮬레이션 하였으며, 검출 특징에 대한 시간적 연속 특징벡터를 생성하여 Hidden Markov Model에 적용함으로써, 의도 패턴에 따른 손동작 분류 시뮬레이션을 수행하였다. 사후 확률 값의 형태로 손 동작 분류 결과를 얻을 수 있었으며, 이를 통한 성능의 우수함을 입증하였다.

토양특성별 중금속 유효도와 토양오염 평가방법의 개선점 (Availability of Heavy Metals in Soils with Different Characteristics and Controversial Points for Analytical Methods of Soil Contamination in Korea)

  • 정구복;김원일;이종식;신중두;김진호;윤순강
    • 한국환경농학회지
    • /
    • 제24권2호
    • /
    • pp.106-116
    • /
    • 2005
  • This experiment was conducted to investigate available extraction capacity and potential mobility of heavy metal according to the distribution property and contamination level of heavy metals in soils and to suggest a reform measure of soil environment assessment methodology applied with soil quality and the official soil heavy metal test methods in domestic and foreign countries. The soils were collected from the natural forest paddy with long-term application of same type fertilizer, and paddies near metal mine and industrial complex. The post-treatment methods of soil were partial extraction, acid digestion and sequential extraction methods. For the heavy metal contents with different soil properties, it was shown that their natural forest and paddy soil were slightly low and similar to the general paddy soil, while their paddies near metal mine and industrial complex were higher than the standard level of Soil Environment Protection Act. Heavy metal concentrations in the soils with different soil properties had difference between $HNO_3\;and\;HNO_3+HCl$ extractant by US-EPA 3051a method. There were highly significant positive relationships in both two methods. It was appeared that the higher extractable concentration ratio with 0.1N-HCl to total heavy metal content with $HNO_3+HCl$ extractant the greater total heavy metal content. There were highly significant positive correlationship between total heavy metal content and extractable content with 0.1N-HCl. For extractable capacity of soil extractable solution compared to the total heavy metal content it was appeared that it extractable method with 0.1N-HCl was higher than those with EDTA and DTPA. In extractable ratio with 0.1N-HCl in the contaminated paddy soils near mine and industrial complex, it was shown that the lower soil pH, the higher total heavy metal content. The order of a potential mobility coefficient by distribution of heavy metal content with ie different typies in the soil was Cd>Ni>Zn>Cu>Pb. It could be known that contamination characteristics of heavy metals with different types of soils were affected by different heavy metal components, contamination degree and soil chemical properties, and heavy metal concentration with different extractable methods had great variations with adjacent environment. To be compared with assessment methodology of soil environment impact at domestic and foreign countries with our results, it might be considered that there was necessary to make a single analysis method based on total heavy metal content with environmental overloading concept because of various analysis methods for total heavy metal content and present analysis method with great variation according to soil environment. In spite of showing higher concentration of heavy metal with acidic digestion than the extractable method, it might be considered that there is need to be adjusted the national standard of soil heavy metal contamination.

보다 정확한 동적 상황인식 추천을 위해 정확 및 오류 패턴을 활용하여 순차적 매칭 성능이 개선된 상황 예측 방법 (Context Prediction Using Right and Wrong Patterns to Improve Sequential Matching Performance for More Accurate Dynamic Context-Aware Recommendation)

  • 권오병
    • Asia pacific journal of information systems
    • /
    • 제19권3호
    • /
    • pp.51-67
    • /
    • 2009
  • Developing an agile recommender system for nomadic users has been regarded as a promising application in mobile and ubiquitous settings. To increase the quality of personalized recommendation in terms of accuracy and elapsed time, estimating future context of the user in a correct way is highly crucial. Traditionally, time series analysis and Makovian process have been adopted for such forecasting. However, these methods are not adequate in predicting context data, only because most of context data are represented as nominal scale. To resolve these limitations, the alignment-prediction algorithm has been suggested for context prediction, especially for future context from the low-level context. Recently, an ontological approach has been proposed for guided context prediction without context history. However, due to variety of context information, acquiring sufficient context prediction knowledge a priori is not easy in most of service domains. Hence, the purpose of this paper is to propose a novel context prediction methodology, which does not require a priori knowledge, and to increase accuracy and decrease elapsed time for service response. To do so, we have newly developed pattern-based context prediction approach. First of ail, a set of individual rules is derived from each context attribute using context history. Then a pattern consisted of results from reasoning individual rules, is developed for pattern learning. If at least one context property matches, say R, then regard the pattern as right. If the pattern is new, add right pattern, set the value of mismatched properties = 0, freq = 1 and w(R, 1). Otherwise, increase the frequency of the matched right pattern by 1 and then set w(R,freq). After finishing training, if the frequency is greater than a threshold value, then save the right pattern in knowledge base. On the other hand, if at least one context property matches, say W, then regard the pattern as wrong. If the pattern is new, modify the result into wrong answer, add right pattern, and set frequency to 1 and w(W, 1). Or, increase the matched wrong pattern's frequency by 1 and then set w(W, freq). After finishing training, if the frequency value is greater than a threshold level, then save the wrong pattern on the knowledge basis. Then, context prediction is performed with combinatorial rules as follows: first, identify current context. Second, find matched patterns from right patterns. If there is no pattern matched, then find a matching pattern from wrong patterns. If a matching pattern is not found, then choose one context property whose predictability is higher than that of any other properties. To show the feasibility of the methodology proposed in this paper, we collected actual context history from the travelers who had visited the largest amusement park in Korea. As a result, 400 context records were collected in 2009. Then we randomly selected 70% of the records as training data. The rest were selected as testing data. To examine the performance of the methodology, prediction accuracy and elapsed time were chosen as measures. We compared the performance with case-based reasoning and voting methods. Through a simulation test, we conclude that our methodology is clearly better than CBR and voting methods in terms of accuracy and elapsed time. This shows that the methodology is relatively valid and scalable. As a second round of the experiment, we compared a full model to a partial model. A full model indicates that right and wrong patterns are used for reasoning the future context. On the other hand, a partial model means that the reasoning is performed only with right patterns, which is generally adopted in the legacy alignment-prediction method. It turned out that a full model is better than a partial model in terms of the accuracy while partial model is better when considering elapsed time. As a last experiment, we took into our consideration potential privacy problems that might arise among the users. To mediate such concern, we excluded such context properties as date of tour and user profiles such as gender and age. The outcome shows that preserving privacy is endurable. Contributions of this paper are as follows: First, academically, we have improved sequential matching methods to predict accuracy and service time by considering individual rules of each context property and learning from wrong patterns. Second, the proposed method is found to be quite effective for privacy preserving applications, which are frequently required by B2C context-aware services; the privacy preserving system applying the proposed method successfully can also decrease elapsed time. Hence, the method is very practical in establishing privacy preserving context-aware services. Our future research issues taking into account some limitations in this paper can be summarized as follows. First, user acceptance or usability will be tested with actual users in order to prove the value of the prototype system. Second, we will apply the proposed method to more general application domains as this paper focused on tourism in amusement park.

[논문 철회] 유화중합에 의한 Methyl methacrylate/styrene계 Core-shell 라텍스 입자 제조에 관한 연구 ([Retraction] Preparation of Methyl methacrylate/styrene Core-shell Latex by Emulsion Polymerization)

  • 강돈오;이내우;설수덕;이선룡
    • Elastomers and Composites
    • /
    • 제37권1호
    • /
    • pp.21-30
    • /
    • 2002
  • 개시제 ammonium persulfate(APS)와 유화제 sodium dodecyl benzene sulfonate(SDBS)를 이용하여 methyl methacrylate(MMA), styrene(St), ethyl acrylate(EA)등의 단량체를 core(내부)와 shell(외부)의 폴리머성분이 다른 core-shell 폴리머를 합성하고 각 core-shell 폴리머에 대한 구조를 연구하였다. 한 입자의 내부와 외부의 고분자 조성이 다른 composite 라텍스는 고분자 블렌딩과 공중합의 물성과는 달리 한 입자 내에서도 상반된 두 가지 물성을 동시에 나타내는 특성으로 인하여 여러 산업 분야에 응용이 가능하다. 그러나, core-shell 라텍스를 제조할 때 반응중입자가 성장하는 과정에서 입자의 응집과 중합율이 떨어지고, 라텍스의 응용시 기계적 안정성이 문제점으로 되고 있다. 따라서 shell 중합시에 새로운 입자의 생성이 적고 중합중 안정성이 우수한 라텍스를 제조하기 위해 유화제농도, 개시제농도, 중합온도가 PMMA/PSt과 PSt/PMMA의 core-shell 구조에 미치는 영향과 중합 후 입도분석기(particle size analyzer; PSA) 및 투과전자현미경(transmission electron microscope; TEM)을 이용하여 실제 입자측정과 입자형태 특성을 확인하였으며 시차주사열량계(differential scanning calorimeter, DSC)를 이용하여 유리전이온도($T_g$)의 측정, 최저성막온도(minimum film formation temperature; MFFT), NaOH 첨가에 의한 가수 분해에 따르는 pH를 측정하여 core-shell의 새로운 특성을 확인하였다.

랫드에 투여된 규회석이 호흡기계에 미치는 영향 연구 (Toxicity study of Wollastonite to the Respiratory Systems in Sprague-Dawely Rats)

  • 정용현;한정희;강민구;이성배;김종규;김현영;양정선
    • 한국산업보건학회지
    • /
    • 제20권4호
    • /
    • pp.263-273
    • /
    • 2010
  • Occupational exposure to wollastonite can occur during its mining, processing and using. Wollastonite was analyzed for its physicochemical properties by transmission electron microscope and scanning electron microscope equipped with energy dispersive X-ray spectrometer. Wollastonite fibers were 3.3${\mu}m$ in diameter(av.) and were 30.5${\mu}m$ in length(av.). The atomic composition of wollastonite was Si 56.41% and Ca 43.59%. Respiratory toxicity of wollastonite has been studied in term sequential in Sprague-Dawely rats. UICC chrysotile (average diameter 0.03${\mu}m$, average length 2.93${\mu}m$) was applied as the positive control. The effects of 2mg wollastonite on respiratory system and pathological changes were evaluated after 1, 4, 8, 12 weeks instilled into rat lungs. Inflammation response broke out from 1 week after instilled with wollastonite and the pathological examination further showed increased legions of granulomatous inflammation after 4 weeks, but decreased granulomatous inflammation after 8 weeks, whereas chrysotile induced progressive interstitial granulomatous inflammation and fibrosis as a function of time.

다채널 동시측정을 적용한 호모다인 주파수영역 확산 광 이미징 시스템의 구현 (Implementation of Multi-channel Concurrent Detection Homodyne Frequency-domain Diffuse Optical Imaging System)

  • 전영식;백운식
    • 한국광학회지
    • /
    • 제23권1호
    • /
    • pp.23-31
    • /
    • 2012
  • 본 논문에서는 근적외선(NIR, near-infrared) 영역의 레이저 광원 및 광검출기를 이용한 주파수영역(frequency-domain) 확산 광이미징(DOI, diffuse optical imaging) 시스템을 구현하였다. 검출신호의 진폭 및 위상 추출에는 70MHz의 단일 변조주파수를 사용하는 호모다인(homodyne) 검출기법을 적용하였으며, 4개의 검출기를 이용해 동시측정이 가능하도록 시스템을 최적화하였다. 각 검출기들이 서로 다른 결합계수(coupling coefficient)를 가짐으로써 발생하는 진폭 및 위상의 편차를 보정하였다. 본 논문에서 제작한 DOI 시스템을 이용하여, 생체조직을 모사한 액체팬텀에 이형성분(anomaly)을 삽입하여 흡수 및 산란 분포에 대한 영상을 복원함으로써 이형성분의 위치 및 광학적 특성에 대한 정보를 획득하였으며, 단일 광검출기를 사용하는 순차적인 측정에 의한 결과보다 영상복원 성능이 개선되었음을 보였다. 또한, 동일한 액체팬텀에 대해서, 측정위치를 이동해가며 각 단층 슬라이스에 대한 흡수계수 및 산란계수 분포영상을 복원함으로써 구현된 시스템을 이용해 단층촬영이 가능함을 보였다.

고도불포화지방산 생합성: 식물에서의 대사공학적 응용 (Biosynthesis of Polyunsaturated Fatty Acids: Metabolic Engineering in Plants)

  • 김순희;김소연;김종범;노경희;김영미;박종석
    • Journal of Applied Biological Chemistry
    • /
    • 제52권3호
    • /
    • pp.93-102
    • /
    • 2009
  • Polyunsaturated fatty acids (PUFA), especially eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) have significantly beneficial effects on health in relation to cardiovascular, immune, and inflammatory conditions and they are involved in determining the biophysical properties of membranes as well as being precursors for signaling molecules. PUFA biosynthesis is catalyzed by sequential desaturation and fatty acyl elongation reactions. This aerobic biosynthetic pathway was thought to be taxonomically conserved, but an alternative anaerobic pathway for the biosynthesis of PUFA is now known to contain analogous polyketide synthases (PKS). Certain fish oil can be a rich source of PUFA although processed marine oil is generally undesirable as food ingredients because of the associated objectionable flavors that are difficult and cost-prohibitive to remove. Oil-seed plants contain only the 18-carbon polyunsaturated fatty acid alpha-linolenic acid, which is not converted in the human body to EPA and DHA. It is now possible to engineer common oilseeds which can produce EPA and DHA and this has been the focus of a number of academic and industrial research groups. Recent advances and future prospects in the production of EPA and DHA in oilseed crops are discussed here.