• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.8-16
• /
• 1999

In this paper, the performance of a hybrid DS/SFH-SS(direct-sequence/slow-frequency-hopped spread-spectrum) system with coherent BPSK modulation over Nakagami fading channel in the presence of multiple tone jamming is analyzed. Because the Nakagami m-distribution can describe not only Rayleigh fading but also more general fluctuations involving a specular component by adjusting the value of the fading index m. It is known that for m=1 corresponds to Rayleigh fading, for $1/2{\le}m{\le}1$ corresponds to the worst case fading condition, for m>1 corresponds to Rician fading, and for $m{\to}{\infty}$ corresponds to the nonfading condition. The bit error probability is derived over Nakagami model and numerical evaluations are presented for some combinations of system parameters. The results show that as m increases, the bit error probability is better. Also, at a low JSR(jamming-to-signal power ratio), a pure DS-SS system can achieve lower bit error probability than a hybrid DS/SFH-SS system. But at a high JSR, a hybrid DS/SFH-SS system is shown to be superior to a pure DS-SS system. Therefore, it is demonstrated that without increasing the total system bandwidth, the performance of a hybrid DS/SFH-SS is superior to that of a pure DS-SS system in the presence of multiple tone jamming.

• Journal of the Korea Computer Graphics Society
• /
• v.15 no.4
• /
• pp.1-11
• /
• 2009

In this paper, we present a prism-based mesh culling method to improve effectiveness of continuous collision detection which is a major bottleneck in a simulation using polygonal mesh models. A prism is defined based on two matching triangles between a sequence of times m a polygonal model. In order to detect potential colliding set(PCS) of prism between two polygonal models in a unit time, we apply the visibility test based on the occlusion query to two sets of prisms which are defined from two polygonal models in a unit time. Moreover, we execute the narrow band culling based on SAT(Separating Axis Test) to define potential colliding prism pairs from PCS of prisms extracted as a result of the visibility test. In the SAT, we examine one axis to be perpendicular to a plane which divides a 3D space into two half spaces to include each prism. In the experiments, we applied the proposed culling method to pairs of polygonal models with the different size and compared the number of potential colliding prism pairs with the number of all possible prism pairs of two polygonal models. We also compared effectiveness and performance of the visibility test-based method with those of the SAT-based method as the second narrow band culling. In an experiment using two models to consist of 2916 and 2731 polygons, respectively, we got potential colliding prism pairs with 99 % of culling rate.

• Radiation Oncology Journal
• /
• v.11 no.2
• /
• pp.321-330
• /
• 1993

Purpose: A retrospective analysis was performed to evaluate the incidence of radiation induced lung damage after the radiation therapy for the patients with carcinoma of the lung. Method and Materials: Sixty-six patients with lung cancer (squamous cell carcinoma 27, adenocarcinoma 14, large cell carcinoma 2, small cell carcinoma 13, unknown 10) were treated with definitive, postoperative or palliative radiation therapy with or without chemotherapy between July 1987 and December 1991. There were 50 males and 16 females with median age of 63 years (range: 33~80 years). Total lung doses ranged from 500 to 6,660 cGy (median 3960 cGy) given in 2 to 38 fractions (median 20) over a range or 2 to 150 days (median in days) using 6 MV or 15 MV linear accelerator. To represent different fractionation schedules of equivalent biological effect, the estimated single dose (ED) model, $ED=D{\dot}N^{-0.377}{\dot}T^{-0.058}$ was used in which D was the lung dose in cGy, N was the number of fractions, and T was the overall treatment time in days. The range of ED was 370 to 1357. The endpoint was a visible increase in lung density within the irradiated volume on chest X-ray as observed independently by three diagnostic radiologists. Patients were grouped according to ED, treatment duration, treatment modality and age, and the percent incidence of pulmonary damage for each group was determined. Result: In 40 of 66 patients, radiation induced change was seen on chest radiographs between 11 days and 314 days after initiation of radiation therapy. The incidence of radiation pneumonitis was increased according to increased ED, which was statistically significant (p=0.001). Roentgenographic changes consistent with radiation pneumonitis were seen in $100\%$ of patients receiving radiotherapy after lobectomy or pneumonectomy, which was not statistically significant. In 32 patients who also received chemotherapy, there was no difference in the incidence of radiation induced change between the group with radiation alone and the group with radiation and chemotherapy, among the sequence of chemotherapy No correlation was seen between incidence of radiation pneumonitis and age or sex. Conclusions: The occurrence of radiation pneumonitis varies. The incidence of radiation pneumonitis depends on radiation total dose, nature of fractionation, duration of therapy, and modifying factors such as lobectomy or pneumonectomy.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.135-135
• /
• 2017

The Gramene database (http://www.gramene.org) is a powerful online resource for agricultural researchers, plant breeders and educators that provides easy access to reference data, visualizations and analytical tools for conducting cross-species comparisons. Learn the benefits of using Gramene to enrich your lectures, accelerate your research goals, and respond to your organismal community needs. Gramene's genomes portal hosts browsers for 44 complete reference genomes, including crops and model organisms, each displaying functional annotations, gene-trees with orthologous and paralogous gene classification, and whole-genome alignments. SNP and structural diversity data, available for 11 species, are displayed in the context of gene annotation, protein domains and functional consequences on transcript structure (e.g., missense variant). Browsers from multiple species can be viewed simultaneously with links to community-driven organismal databases. Thus, while hosting the underlying data for comparative studies, the portal also provides unified access to diverse plant community resources, and the ability for communities to upload and display private data sets in multiple standard formats. Our BioMart data mining interface enable complex queries and bulk download of sequence, annotation, homology and variation data. Gramene's pathway portal, the Plant Reactome, hosts over 240 pathways curated in rice and inferred in 66 additional plant species by orthology projection. Users may compare pathways across species, query and visualize curated expression data from EMBL-EBI's Expression Atlas in the context of pathways, analyze genome-scale expression data, and conduct pathway enrichment analysis. Our integrated search database and modern user interface leverage these diverse annotations to facilitate finding genes through selecting auto-suggested filters with interactive views of the results.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.3
• /
• pp.219-227
• /
• 2005

Purpose: Abnormalities in the p53 gene are regarded as the most consistent genetic abnormalities detected in head and neck squamous cell carcinogenesis. Two new members of the p53 gene family, p73 and p63 have recently been identified. They share considerable sequence homology with p53 in the transactivation, DNA binding, and oligomerization domains, indicating possible involvement in carcinogenesis. Disruption of the homeostatic balance between proliferation and apoptosis is widely believed to contribute to human oral carcinogenesis. The aim of this study was to analyze expression of p63 in squamous cell carcinogenesis and to compare with immunochemical markers representing cell proliferation and apoptosis. Materials and Methods: Using the Syrian hamster oral cancer model, the fraction of apoptotic (apoptotic index-AI), proliferating (mitotic index-MI) and p63 expressing keratinocytes were examined at normal, dysplastic and malignant oral epithelium using the TUNEL assay, PCNA and p63 immunostaining. Results: p63 significantly increased between normal and dysplastic epithelium and between dysplastic and malignant epithelium. PCNA significantly increased between normal and dysplastic epithelium and between normal and malignant epithelium. However, increase between dysplastic and malignant epithelium, though still increasing, was not statistically significant. The percentage of TUNEL positive cells increased from normal to dysplastic epithelium and returned to normal keratinocyte level in the malignant epithelium. However, differences between tissue types were not significant. The ratio of MI:AI increased significantly only in the dysplastic-malignant epithelial transition. The increase of p63 expression closely reflected the change in the MI:AI ratio during oral carcinogenesis. Conclusion: The p63 may be associated with the regulation of epithelial proliferation and apoptosis in DMBA-induced hamster buccal pouch squamous cell carcinogenesis. Further study is required to investigate which p63 isoforms are involved in hamster buccal pouch carcinogenesis.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1428-1433
• /
• 2012

Longevity is an exciting but difficult subject to study because it is determined by complex processes that require the coordinated action of several genetic factors as well as physiological and environmental influences. Genetic approaches have been applied to animal models to identify the molecular mechanism responsible for longevity. Several experimental model organisms obtained over the last decades suggest that the complete deletion of a single gene by gene targeting has proven to be an invaluable tool for the discovery of the mechanisms underlying longevity. The first discovery of long-lived mutants came from Caenorhabditis elegans research, which identified the insulin/IGF-1 pathway as responsible for longevity in this worm. IGF-1 is a multifunctional polypeptide that has sequence similarity to insulin and is involved in normal growth and development of cells. Several factors in the IGF-1 system have since been studied by gene targeting in the control of longevity in lower species, including nematode and fruit fly. In addition, significant progress has been made using mice models to extend the lifespan by targeted mutations that interfere with growth hormone/IGF-1 and IGF-1 signaling cascades. A recent finding that IGF-1 is involved in aging in mice was achieved by using liver-specific knockout mutant mice, and this clearly demonstrated that the IGF-1 signal pathway can extend the lifespan in both invertebrates and vertebrate models. Although the underlying molecular mechanisms for the control of longevity are not fully understood, it is widely accepted that reduced IGF-1 signaling plays an important role in the control of aging and longevity. Several genes involved in the IGF-1 signaling system are reviewed in relation to longevity in genetically modified mice models.

• Composites Research
• /
• v.35 no.5
• /
• pp.303-308
• /
• 2022

PIC (Piecewise Integrated Composite) is a new concept for designing a composite structure with mosaically assigning various types of stacking sequences in order to improve mechanical properties of laminated composites. Also, machine learning is a sub-category of artificial intelligence, that refers to the process by which computers develop the ability to continuously learn from and make predictions based on data, then make adjustments without further programming. In the present study, the tapered box beam type PIC robot arm for carrying and transferring wide and thin LCD display was designed based on the machine learning in order to increase structural stiffness. Essential training data were collected from the reference elements, which were intentionally designated elements among finite element models, during preliminary FE analysis. Additionally, triaxiality values for each finite element were obtained for judging the dominant external loading type, such as tensile, compressive or shear. Training and evaluating machine learning model were conducted using the training data and loading types of elements were predicted in case the level accuracy was fulfilled. Three types of stacking sequences, which were to be known as robust toward specific loading types, were mosaically assigned to the PIC robot arm. Henceforth, the bending type FE analysis was carried out and its result claimed that the PIC robot arm showed increased stiffness compared to conventional uni-stacking sequence type composite robot arm.

• Korean Journal of Animal Reproduction
• /
• v.20 no.4
• /
• pp.453-458
• /
• 1997

It is known that the incorporation of genes into transgenic mice is generally stable and is p passed on to succeeding generations in a Mendelian fashion. In this report, transgenic mice were set as a model to evaluate whether the transgenes are transmitted in a Mendelian principle in a successive generations and how they are tran s smitted into their offspring. A 3.0 kb linear DNA fragment, containing the MMTV LTR, bovine aSI casein cDNA and SV 40 splicing and polyadenylation site; was microinjected into fertilized mouse embryos. The tail DNAs of the resulting pups were subjected to dot and Southern hybridizations to screen transgenic founders. The DNAs of their offspring were anlyzed by PCR to confirm the transmission of the transgene from F0. Out of 72 live pups four pups (5.6%), 3 males and 1 female, were positive for the transgene. The rates of transmission from F0 into F1 were 33.3, 7.7, 0, and 62.5%. Those from F1 into F2 were 63.6, 5.9, and 68.8% and those from F2 into F3 were 85.7, and 88.2%. In this report, the transmission pattern of transgenes in transgenic mice into their offspring was demonstrated. It either follows or does not follow in a Mendelian fashion. Deletion or loss of the transgenes from F0 in some lines became apparant to the succeeding generations.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.626-635
• /
• 2015

Along with the social interests and needs for health, the U-Healthcare Service as a new model to control individual dietary life and to prevent chronic diseases is now drawing the public attention. In this study, the characteristics of the requirement of U-Healthcare Service were investigated from subjects aged over 50 years old. As parts of the expectation to the U-Healthcare service, the customized clinical care & control (37.7%) and the systematic understanding of individual health state (21.4%) appeared significantly. And for the application of the U-Healthcare Service to the field of healthcare, the control of dietotherapy (43.9%) appeared higher than anything else and thus the customized service for individual dietotherapy seemed to be needed. Regarding the field of searching for health information, the disease control (35.6%), food materials (28.6%), and recipe for health foods (22.7%) appeared in sequence and revealed that the majority over 50% of subjects were interested in foods. The requirements for the information of dietary formula were also investigated through 5 points scaled questionnaires on respective topics of nutritive components, menus customized for corresponding health states (diseases), and the results obtained from surveys on respective topics all showed the needs for all information by representing each point value exceeded 3.9. Through the results obtained from this study, the provision of customized information enabling the nutritional control in accordance with individual states of health or disease was estimated to be needed for the popularization of U-Healthcare Service providing contents for dietary life of clients especially those of aged over 50 years.

• International Journal of High-Rise Buildings
• /
• v.1 no.1
• /
• pp.37-51
• /
• 2012

New generation of tall and complex buildings systems are now introduced that are reflective of the latest development in materials, design, sustainability, construction, and IT technologies. While the complexity in design is being overcome by the availability and advances in structural analysis tools and readily advanced software, the design of these buildings are still reliant on minimum code requirements that yet to be validated in full scale. The involvement of the author in the design and construction planning of Burj Khalifa since its inception until its completion prompted the author to conceptually develop an extensive survey and real-time structural health monitoring program to validate all the fundamental assumptions mad for the design and construction planning of the tower. The Burj Khalifa Project is the tallest structure ever built by man; the tower is 828 meters tall and comprises of 162 floors above grade and 3 basement levels. Early integration of aerodynamic shaping and wind engineering played a major role in the architectural massing and design of this multi-use tower, where mitigating and taming the dynamic wind effects was one of the most important design criteria established at the onset of the project design. Understanding the structural and foundation system behaviors of the tower are the key fundamental drivers for the development and execution of a state-of-the-art survey and structural health monitoring (SHM) programs. Therefore, the focus of this paper is to discuss the execution of the survey and real-time structural health monitoring programs to confirm the structural behavioral response of the tower during construction stage and during its service life; the monitoring programs included 1) monitoring the tower's foundation system, 2) monitoring the foundation settlement, 3) measuring the strains of the tower vertical elements, 4) measuring the wall and column vertical shortening due to elastic, shrinkage and creep effects, 5) measuring the lateral displacement of the tower under its own gravity loads (including asymmetrical effects) resulting from immediate elastic and long term creep effects, 6) measuring the building lateral movements and dynamic characteristic in real time during construction, 7) measuring the building displacements, accelerations, dynamic characteristics, and structural behavior in real time under building permanent conditions, 8) and monitoring the Pinnacle dynamic behavior and fatigue characteristics. This extensive SHM program has resulted in extensive insight into the structural response of the tower, allowed control the construction process, allowed for the evaluation of the structural response in effective and immediate manner and it allowed for immediate correlation between the measured and the predicted behavior. The survey and SHM programs developed for Burj Khalifa will with no doubt pioneer the use of new survey techniques and the execution of new SHM program concepts as part of the fundamental design of building structures. Moreover, this survey and SHM programs will be benchmarked as a model for the development of future generation of SHM programs for all critical and essential facilities, however, but with much improved devices and technologies, which are now being considered by the author for another tall and complex building development, that is presently under construction.