• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.476-476
• /
• 2009

Periodic vortex separations generate periodic vertical forces acting on a trailing edge of an airfoil. When a natural frequency of the trailing edge of the airfoil is close to a vortex shedding frequency, an amplitude of the edge oscillation becomes maximal; it makes intensive noise called singing. Motion of the trailing edge may also feedback to the vortex shedding so that self-sustained oscillation appear, and a resonant frequency is locked in some interval of the speed of the incident flow. In this study, a theoretical model is proposed and applied for modeling an airfoil singing. Results are compared with experimental measurements which are carried out in an anechoic wind tunnel.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.648-653
• /
• 2003

Optimized recovery of heavy minerals from the near shore sands of Korean Yellow Sea was investigated using physical processing technologies such as gravity concentration and magnetic separation. The head samples were subjected to the three stages effective separation; Head sample was first treated by a spiral separator to recover rough heavy mineral concentrates, which are contained minerals like ilmenite, zircon and rare earth minerals. Much higher beneficiation processes were subsequently taken by wilfley table and magnetic separation according to their magnetic field responses. Heavy minerals were effectively recovered by wilfley table and subsequent recleaning of heavy minerals by magnetic separations was conducted. Qualitative and relative-quantitative analyses of their constituent elements were doing using XRD and XRF.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.184-192
• /
• 2009

There are total eight degrees of freedom in designing a three-mirror system. If we correct four kinds of third order aberrations and the system should have the specified effective focal length, the remaining three degrees of freedom can be used for selecting a suitable configuration for a specific application. We suggest an analytic design procedure for a three-mirror telescope system which has a suitably sized secondary mirror and proper separations between mirrors, and is corrected for four kinds of third order aberrations, spherical aberration, coma, astigmatism, and field curvature. Two design examples are shown. One has a compact configuration with off-axial field, the other has relatively long configuration with annular ring field.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.2
• /
• pp.115-121
• /
• 2010

Periodic vortex separations generate periodic vertical forces acting on a trailing edge of an airfoil. When a natural frequency of the trailing edge of the airfoil is close to a vortex shedding frequency, an amplitude of the edge oscillation becomes maximal; it makes intensive noise called singing. Motion of the trailing edge may also feedback to the vortex shedding so that self-sustained oscillation appears, and a resonant frequency is locked in some interval of the speed of the incident flow. In this study, a theoretical model is proposed and applied for modeling an airfoil singing. Results are compared with experimental measurements which are carried out in an anechoic wind tunnel.

• Journal of Korean Society on Water Environment
• /
• v.21 no.4
• /
• pp.393-397
• /
• 2005

In this study, flow in a porous medium is analyzed using a computer-extended perturbation series solution. The flow is modelled as a creeping flow in a periodically constricted channel. The channel walls have a sinusoidally varying width and the flow is analyzed in terms of its vorticity and stream functions in the Stokes flow regime. The perturbation series in terms of a small parameter, average width to length ratio, is extended with a computer resulting in purely asymptotic series and Pade summation is used to obtain final results. Resulting flow shows flow separations in the widening section and immobile zones in the widest section of the flow regime with reattachment in the narrowing section. Analysis of the flow separation phenomena resulted in a correlation between the two geometric parameters of the channel walls to predict the onset of flow separation in the Stokes flow regime.

• Progress in Superconductivity
• /
• v.6 no.2
• /
• pp.99-103
• /
• 2005

For ac applications a detailed understanding of the ac power losses associated with different conductor configurations is of crucial importance. YBCO thin films were divided into parallel filaments with widths of 1, 2, and 4 mm to reduce hysteresis losses. The measured hysteresis losses show a linear relationship between the strip width and hysteresis loss as anticipated. The influence of different inter-filament separations on the hysteresis loss is investigated.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.59.1-59.1
• /
• 2017

Massive Population III black hole binary systems are one of the suggested candidate sources of the recently detected gravitational wave radiation (GWR). GWR detection from a black hole binary system requires a sufficiently short orbital separation at the time of their formation, such that they would undergo coalescence within the Hubble time. This condition cannot be simply fulfilled by a short initial period, because binary interactions such as mass transfer and common envelope evolution can largely change the orbital parameters and the masses of stellar components. Here, we discuss the possibility of black hole binary mergers from massive Pop III binary systems, using a new grid of Pop III binary evolutionary models with various initial primary masses ($20M_{\odot}{\leq}M{\leq}100M_{\odot}$) and initial separations, for different initial mass ratios (q = 0.5 - 0.9).

• Korean Journal of Child Studies
• /
• v.26 no.6
• /
• pp.17-28
• /
• 2005

To understand further the differences in the distribution of attachment classifications assigned to 12-15 month old infant raised in Korea(N=85) and the U.S.(N=104), detailed analyses of maternal and infant behavior during the Strange Situation was undertaken. Indices of infants' attachment behavior with their mothers and distress during separations were rated. The percentage of Korean infants classified as secure versus insecure mirrored the global distribution, however, fewer Korean babies were classified as avoidant, As predicted, secure Korean babies were less likely than secure U.S. babies to approach their mothers, maintain contact or show resistant behavior and more often displayed distress during the second separation from their mother. Resistant Korean babies, however, did not significantly differ from resistant U.S. babies with respect to their attachment behavior but more often displayed distress when left with a stranger. These findings are discussed with respect to cultural differences in caregiving.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.420-427
• /
• 2011

In this study, numerical simulations of transonic aircraft configurations are performed with various turbulence models and the effect of turbulence models on flow separation are examined. A three-dimensional RANS code and three turbulence models are used for the study. The turbulence models incorporated to the code include Menter's ${\kappa}-{\omega}$ model, Coakley's $q-{\omega}$, and Huang and Coakley's ${\kappa}-{\omega}$, model. Using the code, numerical simulations of DLR-F6 configurations obtained from AIAA CFD Drag Prediction Workshop are conducted. Flow separations on the wing-body juncture and the wing lower surface near pylon are observed. and flow features of the regions are compared with experimental data and other numerical results.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1258-1269
• /
• 2004

The fluid dynamic characteristics of a circular arc type sea anchor were calculated by a discrete vortex method. The flow for the surface of the sea anchor was represented by arranging bound vortices at adequate intervals. The simulations were performed by assuming that the separations occur at edges. With time, the drag coefficient was almost constant but the lift coefficient oscillated in a cycle due to von Karman's vortex street. As the camber ratios increase, the drag coefficient and Strouhal number were almost constant but the oscillating amplitude of the lift coefficient increased largely.