• YAKHAK HOEJI
• /
• v.32 no.1
• /
• pp.26-39
• /
• 1988

Eudragit $RS^{\circledR}$ polymer was used as a wall material for the microencapsulation of aspirin by a phase separation method from chloroform-cyclohexane system with 5% polyisobutylene (PIB) in cyclohexane, and microcapsules obtained were evaluated by particle size analysis, scanning electron microscopy (SEM), drug release and drug stability test. With PIB as a coacervation inducing agent, smooth and tight microcapsules with less aggregation were obtained. Below 1 : 0.3 core-wall ratio, it was possible to coat individual particle. Variation of production conditions showed that increasing the proportion of wall material, particle size and wall thickness of microcapsules and the concentration of paraffin wax in cyclohexane as a sealant sustained drug release rates effectively. SEM confirmed that larger microcapsules after drug release did not rupture into smaller particles but contained a few small pores on the surface. Aspirin release from Eudragit $RS^{\circledR}$ coated microcapsules was independent of the pH of medium, and the mechanism of drug release from non-sealed and sealed microcapsules appeared to fit Higuchi matrix model kinetics. Aspirin in the mixture of aspirin microcapsules and sodium bicarbonate was by far more stable than that in the mixture of pure aspirin and sodium bicarbonate.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.140-141
• /
• 2018

There are three types of high fluidity concrete: powder based, VMA based, and combined. In the case of the powder based high fluidity concrete mixture, according to the textbook, increased viscosity due to the replaced fly ash can prevent segregation of coarse aggregate. On the other hand, decreased density of the powder due to the fly ash replacement can causes segregation but there is no report on this issue. Therefore, in this research, the segregation resistance and segregation evaluation method for powder based high fluid concrete mixture are evaluated. As a result, with increased replacing ration of supplementary materials, EIS value was decreased and apparently segregation resistance was increased. However, from the compressive strength evaluation depending on height of the cylindrical specimen, it was confirmed that the different of strength difference between top and bottom part of the specimen. Thus, following research regarding vertical segregation should be studied.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.522-525
• /
• 2008

최근 세라믹 막은 우수한 화학적, 열적 안정성으로 기체 분리 공정에 각광을 받아 왔다. 특히 혼합기체에서 고 순도의 수소를 분리해 내는 기술은 연료전지 공정에서 화학 에너지를 전기화학 에너지로 전환시키는데 중요한 역할을 차지한다. 본 연구에서는MTES 템플레이팅 막을 이용하여 이 막 공정의 흡착 및 투과 특성을 규명하고, 이성분 혼합기체에서 고 순도의 수소를 추출해 낼 수 있는 최적 조건을 도출해 내었다. 또한, 기체 분리 거동을 살펴보기 위해 Gproms Dynamic Simulator를 이용하였으며, 이때 기체상의 물질전달을 모사하기 위해 Dust Gas Model(DGM)을, 표면 확산 거동을 모사하기 위해 Generalized Stefan-Maxwell(GSM)식을 적용하였다. 이를 통해 평형론적 흡착 뿐 아니라 속도론적 흡착을 동시에 적용할 수 있게 하였다. MTES 템플레이팅 막의 흡착 및 분리능을 규명하기 위해 본 연구에서는 혼합기체의 투과, 분리 실험이 선행되었다. 실험 조건은 온도범위 323$\sim$473 K, 압력범위 0$\sim$7 atm에서 수행되었으며, 혼합기체는2성분으로 수소-메탄, 수소-이산화탄소, 수소-질소로 기체의 구성비는 각각 50:50 이다. 본 연구를 통해 각 혼합 기체들이 정상상태에 도달하는 시간과 분리능을 계산해 내었으며, 이 분리능을 다시 온도와 압력에 따른 결과로 분석하여 어느 조건에서의 수소 분리도가 최고치를 보이는지를 규명했으며, 시뮬레이션과 비교,대조하여 예측도를 검사하였다.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.12-21
• /
• 2014

Nickel oxide ores are composed of two kinds of minerals; one is saprolite that is processed by smelting to obtain nickel products, and the other is limonite that is used in hydrometallugical processes. It is not efficient economically to process the mixture of limonite and saprolite, so the processes to saparate the ore mixture should be developed. In the present study, the mixture was separated by dry-classification after liberationg using grindability difference between limonite and saprolite. Consequently, it is possible to obtain the limonite with less than 10% of Mg+Si contents, which could be treated by hydrometallurgical processes, when the limonite contain less than 30% of saprolite.

• Journal of the Korean Society of Tobacco Science
• /
• v.16 no.2
• /
• pp.172-180
• /
• 1994

This study was carried out to separate and identify the acidic compounds in tobacco leaves. Izmir tobacco leaves was extracted with isopropyl ether and the extract was concentrated. The concentrate was extracted with 6% NaHCO3 aqueous solution. The aqueous extract was acidified with sulfuric acid, and extracted with diethyl ether. The acidic material was fractionated on silicic acid column using a benzene-methanol mixture with a stepwise increasing methanol concentration. The resulting fractions were esterified with diazomethane, and then identified by GC, GC/MS using SPB -5 fused silica capillary column. Most of acidic compounds in Izmir tobacco leaves were elected from fraction B which was benzene-methanol(98 : 2) mixture on silicic acid column chromatography. The identified acidic compounds of Izmir tobacco leaves were 18 saturated acids, 8 unsaturated acids, 5 dicarboxylic acids, 13 aromatic acids and 7 terpenoid acids. The major acidic compounds of lzmir tobacco leaves were 2- methylbutanoic, 3-methyl butanoic, 3- methylpentanoic, hexanoic, nonanedioic, phenylacetic, benzoic, 4- methoxybenzoic, 3, 5- dimethoxybenzoic, methoxycinnamic and 3, 4- dimethoxycinnamic acid. Key Words : Izmir tobacco, Acidic compounds, GC/MS.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.487-492
• /
• 2007

Using the selective host-guest inclusion of $G_2$[naphthalene disulfonate], the structural isomers of 1,2-dibromobenzene and 1,3-dibromobenzene were separated. As such, 1,3-dibromobenzene was selectively included as guest into the host framework in mixture isomers over 30% fraction of 1,3- dibromobenzene ($X_{1,3-DBB}=0.3$) whereas 1,2-dibromobenzene as guest was selective to the inclusion below $X_{1,3-DBB}=0.3$. This was due to the selectivity of host framework toward the guest molecules playing a role of template to the host framework. From the powder pattern XRD of inclusion compounds crystallized in pure isomer and mixture solutions, the template roles of guest molecules to the host framework were confirmed. Using the DSC, it was found that the more energy was required to release 1,3-dibromobenzene of guest from the host framework than 1,2-dibromobenzene due to the higher thermal stability. The thermal stability of the $G_2NDS$-1,3-dibromobenzene inclusion compound was consistent with the high selectivity of 1,3- dibromobenzene to the host framework in broad range of fraction in the isomer mixture

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.562-569
• /
• 1994

In this study improvement of transient analysis model, KOTRAC, for the passive reactor has been performed. In the KOTRAC, mixture drift flux model is adopted to simulate thermal hydraulic behavior, which can simulate ECCS injection in the passive plant. However, there is a difficulty to handle complete phase separation phenomena due to the near-zero density, which may occur in the pressurizer surge line or horizontal flow paths. In this study, a couple of model changes to over-come Courant limit feilure has been examined. One of key features is to substitute flow distribution parameters with Ishii's correlation. Corrected results are nil compared to those of RELAP/MOD3 analysis.

• Membrane Journal
• /
• v.26 no.4
• /
• pp.291-300
• /
• 2016

Techniques for selectively separating molecules of gas and liquid states using various separation membranes have been widely used in variety of applications such as chemical, biological, pharmaceutical, and petrochemical industries. As the nanochannel diameter, inter-channel distance and length of the nanochannel of the anodic aluminum oxide (AAO) membranes can be precisely controlled, various studies to effectively separate mixture of various molecules using AAO membrane have been widely carried out. In this study, we fabricated AAO membranes of cylindrical nanochannels of various diameter sizes and of through-hole structure, that is, nanochannels of which both ends of each nanochannel are open. Using those AAO membranes of through-hole nanochannel structure, we studied the selective permeation polymer chains dissolved in a solvent based on hydraulic volume of the polymer chains. We found a precise, quantitative relationship between the radius of gyration of polymer chains that permeated through nanochannels inside AAO membrane and the diameter of nanochannels. In addition, we demonstrate that the behavior of the polymer solution flowing through nanochannel of the AAO membrane can be successfully described with the Hagen-Poiseuille relationship. It is, therefore, possible to theoretically interpret the nanoflow of the solution flowing inside the cylindrical nanochannel.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.1941-1945
• /
• 2008

A new chromatographic stationary phase has been prepared by cross polymerization between allylsilica and perallyloxycucurbit[6]uril and characterized by elemental analysis and FT-IR spectroscopy. The double endcapping has been proven to improve the separation efficiency of the cucurbituril-based stationary phase material. The first end-capping was carried out when allylsilica was made. The second end-capping was done as the final step of the whole process, and the use of a mixture of hexamethyldisilazane (HMDS) and trimethylchlorosilane (TMCS) as an end-capping reagent was found better than the use of only HMDS or TMCS. Our stationary phase has shown generally good results in separation of nonpolar and polar analytes. This phase showed even better separation performance than the commercial C18 phase for the case where hostguest chemistry was properly incorporated in solute retention.

• Korean journal of applied entomology
• /
• v.16 no.4 s.33
• /
• pp.221-227
• /
• 1977

Polychlorinated Biphenyls (PCBs) interfere with gas chromatographic analysis of multiple organochlorine pesticide residues. In the present work, existing Florisil column chromatographic method has been modified as to improve separation of organochlorine pesticides and their metabolites from PCBs. It was amply demonstrated that separation of $\alpha-BHC,\; \gamma-BHC$ Heptachlor epoxide Dieldrin, p.p-DDD, p.p'-DDT from PCBs such as Aroclor 1254 is complete and recovery of the pesticides is found quantitative. Aldrin and Heptachlor in the Aroclor eluant can be separately analyzed by comparison of the chromatographic pattern of standard Aroclor 1254 with that of Aroclor 1254 a dmixed with the two pesticides. The Florsil column technique can be utilized in the routine evaluation of the organochlorine pesticide residues by gas chromatography.