• 대한화학회지
• /
• 제29권2호
• /
• pp.144-150
• /
• 1985

스티렌과 디비닐벤젠을 이용한 공중합체의 합성에 희석제로서 헵탄과 톨루엔을 사용하여 다공성 및 미세구조에 미치는 영향을 조사하였다. 스티렌디비닐벤젠 공중합체를 아미노화하여 음이온 교환수지를 합성하였으며 이 수지의 이온교환용량과 알코올 수용액에서 붕산에 대한 분포계수 값을 구하였고 이온교환 크로마토그래피와 질량분석기를 이용하여 붕소의 동위원소 분리효과를 연구하였다.

• 공업화학
• /
• 제4권3호
• /
• pp.583-590
• /
• 1993

키토산 유도체 중 약한 음이온 교환기를 갖는 O-Diethylaminoethyl 키토산을 제조하여, 이를 크로마토그래피의 고정상으로 이용하여 생체단백질의 하나이며 등전점이 서로 다른 알부민과 라이소자임의 분리에 응용하였다. 우선 산성 염료와 염기성 염료를 이용하여 고정상으로서의 응용 가능성을 검토하였고 용매에 의한 극성효과도 검토하였다. 이것을 토대로 하여 크로마토그래피의 분리에 미치는 제반인자를 구하였다. 용매로써는 물과 메탄을 공용매를 사용하였고 이 경우 극성값이 증가할수록 분리능이 증가하였으며 가장 좋은 분리능은 치환도가 0.23인 경우 분리도가 1.42였다.

• 한국광학회지
• /
• 제8권4호
• /
• pp.260-266
• /
• 1997

DCG(dichromated gelatin : 7.mu.m 두께) 필름을 이용하여 홀로그래픽 편광분리(Holographic Polarization Separation : HPS)소자를 설계 제작하였다. 제작한 HPS소자의 편광특성을 노출시간, 입사각, 편광각 등의 몇가지 물리적 변수들을 이용하여 조사하였다. 실험결과가 Kogelnik의 결합 파동이론에 기초한 이론적 결과와 잘 일치함을 알 수 있었다. 제작한 HPS소자는 633 nm 파장에서 편광 회절 강도비가 500:1(S편광:P편광)이상이였다. 또한 HPS소자의 광 스위치 및 자유공간 광 연결소자로서의 응용 가능성을 제시하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권4호
• /
• pp.613-631
• /
• 2013

Cognitive radio (CR) is proposed as a key solution to improve spectral efficiency and overcome the spectrum scarcity. Spectrum sensing is an important task in each CR system with the aim of identifying the spectrum holes and using them for secondary user's (SU) communications. Several conventional methods for spectrum sensing have been proposed such as energy detection, matched filter detection, etc. However, the main limitation of these classical methods is that the CR network is not able to communicate with its own base station during the spectrum sensing period and thus a fraction of the available primary frame cannot be exploited for data transmission. The other limitation in conventional methods is that the SU data frames should be synchronized with the primary network data frames. To overcome the above limitations, here, we propose a spectrum sensing technique based on blind source separation (BSS) that does not need time synchronization between the primary network and the CR. Moreover, by using the proposed technique, the SU can maintain its transmission with the base station even during spectrum sensing and thus higher rates are achieved by the CR network. Simulation results indicate that the proposed method outperforms the accuracy of conventional BSS-based spectrum sensing techniques.

• Journal of Microbiology and Biotechnology
• /
• 제9권4호
• /
• pp.522-524
• /
• 1999

A discontinuous Percoll gradient was used to separate islets from the collagenase-treated mouse pancreas easily and rapidly. Since the osmolality of Percoll is very low, adjustment of its osmolality to 340 mOs/kg $H_2$O was essential for securing the optimal separation. A discontinuous gradient layering with Percoll solution of 1.09 g, 1.07g, and1.05g/m, respectively, when centrifuged at 800$\times$g for 10 min, resulted in an optimal condition for separation and yielded a banding pattern with an even distribution of islet cells. No significant difference was observed in the morphological features between the Percoll-isolated and the manually-isolated islets. In conclusion, the discontinuous Percoll gradient can be effectively used to isolate the pancreatic islets from mice with four-fold higher efficiency compared to the handpicking method.

• 한국환경과학회지
• /
• 제17권11호
• /
• pp.1235-1241
• /
• 2008

Membrane separation is extensively used for water/wastewater treatment because of its efficiency separation processes. However, particles in the feed water can deposit and accumulate on the membrane surface to created cake layer. As a consequence, the selectivity of the membrane and flux through the membrane are decreased, which is called fouling/blocking phenomenon. In order to solve fouling problem, we developed a novel membrane named Carbon Whisker Membrane (CWM) which contains vapor-grown carbon fibers/whiskers on the surface of the membrane and a layer of carbon film coated on the ceramic substrate. We firstly employed polymethyl methacrylate (PMMA) as a testing material to investigate the fouling mechanism. The results suggested that Carbon Whiskers on the surface of the membrane can prevent the directly contact between the membrane body and particles so that the fouling/blocking could not occurred easily compared to the membrane without carbon whiskers. We also researched the relationship with the diameter, density of carbon whisker on the membrane surface and total flux of solutions. Finally, we will be able to control the diameter and density of carbon whiskers on the membrane and existence of carbon whiskers on the membrane, it is important factor, might be prevent fouling/blocking in the water treatment.

• Mass Spectrometry Letters
• /
• 제2권3호
• /
• pp.65-68
• /
• 2011

The effects of column length and particle size on the efficiency of separation and characterization of phospholipids (PLs) are investigated using nanoflow liquid chromatography-electrospray ionization-tandem mass spectrometry (nLC-ESI-MS-MS). Since PLs are associated with cell proliferation, apoptosis, and signal transduction, it is of increasing interests in lipidomics to establish reliable analytical methods for the qualitative and quantitative profiling of PLs related to biomarker development in adult diseases. Due to the complexity of PLs, the preliminary separation of PLs is necessary prior to MS analysis. In this study, length of capillary column and the particle size of reversed phase ($C_{18}$) packing materials are varied to find a reliable condition for the high speed and high resolution separation using 8 PL standard mixtures. From experiments, it was found that a capillary column of nLC-ESI-MS-MS analysis for PL mixtures can be minimized to a 5 cm long pulled tip column packed with 3 ${\mu}m$ $C_{18}$ particles without losing resolution.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2005년도 추계학술발표회 논문집
• /
• pp.141-145
• /
• 2005

DME (Di-Methyl Ether) is a new clean fuel and an environmental-friendly energy resource, also is recently increasing with an alternative interest because of the industrial use. DME has been shown to have excellent properties as a diesel fuel giving emission level better than ULEV standard. So it has been attracting considerable as an alternative diesel fuel. In this study, we carried out simulation of separation and purification process of demo plant for 101on per day DME production, which cause the effect that is important in productivity, from operation results of pilot plant for 50kg per day DME production. The liquefied stream, which was separated by gas-liquid separator after DME reactor, includes $CO_2$, DME, Methanol and $H_2O$. We established three distillation columns for separation and purification of the stream. $CO_2$ was extracted from the stream by first distillation column, DME was extracted by second column and Methanol was extracted by third column. We investigated and analyzed the effect which the actual operation variables cause in efficiency of process and optimized process, finally we got the DME of purity $100\%$.

• 한국포장학회지
• /
• 제16권1호
• /
• pp.9-18
• /
• 2010

For screening test of the non-volatile compounds which migrate from food packaging materials into foodstuffs, the traditional high performance liquid chromatography (HPLC) systems suffer from the lack of universal detector with high sensitivity and universality and high efficiency HPLC separation column which provides complete separation of complex mixtures into all individual substances. In this work, the use possibility of online two-dimensional liquid chromatography (2D-LC) system coupled with a charged aerosol detector (CAD), a universal detector, was reviewed. 2D-LC system permits to improve peak capacity and resolving power for complex mixtures. Charged aerosol detector (CAD) offers a new feasibility for detection of any non-volatile compounds with high sensitivity and constant response factor in a calibration range. The combination of size exclusion chromatography (SEC) and normal phase HPLC (NP-HPLC) is most frequently used for the separation of the natural and synthetic polymers which are mainly used as raw materials for the manufacture of food packaging materials. However, there is no commercial software available for data acquisition and handling and therefore the quantification in 2D-LC analysis is still rare.

• 한국소음진동공학회논문집
• /
• 제23권3호
• /
• pp.267-273
• /
• 2013

Recently, turbine-generators have been replaced for the integrity reinforcement and the efficiency improvement, also, the blade's failures of LP turbines due to torsional vibration have been reported. Excessive torsional vibrations can result in failures of components. The severity of torsional oscillations and stress depends upon the separation margin between the excitation frequencies and torsional natural frequencies. Therefore it is needed to measure the torsional natural frequencies after replacement of the components to conform the separation margin of torsional natural frequencies. In this study torsional vibration measurements were performed after LP turbine and generator replacement and the torsional natural frequencies for the turbine-generator train were calculated to evaluate the effects of generator replacement on torsional natural frequencies of turbine-generator train. It is expected that these evaluation results will be used effectively to identify the root causes of torsional vibration problems.