• 한국입자에어로졸학회지
• /
• 제4권2호
• /
• pp.37-50
• /
• 2008

Concerns on centrifugal classifiers, of which have cut sizes are below few micrometers, have been increased and it is prospected to be used in extensive industries, such as manufacturing the fine minerals, cosmetics, advanced electric materials, and life science. This paper reviews the recent progress of research and development on the centrifugal classifiers. General categorization of classifiers for feeds was assessed and separation mechanism of the classifiers was followed. History of centrifugal classifiers was explored and some points to be improved were briefly indicated. Fundamental theory of the classification by centrifugal classifiers was pearly studied, and advanced and further understandings on factors affecting the separation or grading efficiency are described. Factors determining the classification precision and efficiency of centrifugal classifiers, such as geometry, rotational speed and inclined angle of rotating vanes, feed and air flow rates, and rotor dimensions are reviewed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.663-669
• /
• 2005

Performance characteristics of an axial flow fan having distorted inlet flow have been investigated using numerical analysis as well as experiment. Two kinds of hub-cap, round shape and right-angled front shape, are tested to investigate the effect of inlet flow distortion on the fan performance. In case of right-angled front shape, axisymmetric distorted inflow is induced by flow separation at the sharp edge of hub-cap, and the characteristics of the inflow depends on the distance between hub-cap and blade leading edge. Flow analysis of the blade passage is peformed by solving the three-dimensional Reynolds-averaged Navier-Stokes equations. numerical solutions are validated in comparison with experimental data measured by a five-hole probe downstream of the fan rotor. It is found from the numerical results that non-uniform axial inlet velocity profile near the hub results in the change of inlet flowangle. The changed inlet flow angle near the hub invokesa flow separation on the blade surfaces, thus deteriorating the fan efficiency. The effect of the distance between hub-cap and blade leading edge on the efficiency is also discussed.

• 공업화학
• /
• 제25권2호
• /
• pp.157-160
• /
• 2014

폐 젤리충진 통신케이블로부터 고순도 구리회수를 위하여 실리콘계 및 톨루엔계 합성 열매유와 폐식용유를 사용하여 적용성을 평가하였다. 실리콘계 오일의 경우 모든 조건에서 분리효율이 낮은 반면, 톨루엔계 오일 및 폐식용유의 경우 처리온도 및 시간을 조절함에 따라 높은 분리효율을 얻을 수 있었다. 폐식용유를 사용하는 50 kg급 밀폐형 대용량 설비를 이용하여 $300^{\circ}C$에서 60 min 이상 처리할 경우 99.2% 이상의 고순도 구리와이어를 100% 회수할 수 있었다.

• 한국축산시설환경학회지
• /
• 제1권1호
• /
• pp.47-53
• /
• 1995

An efficient Treatment of animal wastewater is one of the hot issues for preventing the environmental pollution. It should be established the design parameter in order to purify the animal wastewater. A test is carried on in the pilot plant as a simplified activated sludge process. A vibration sieve separator is deviced to keep the pollution load constant by means of separation of solid matter. The BOD removal efficiency of the vibration sieve showed over 50%. As the test results, the BOD contents of the influent was in average of 3,000 mg/I and that of the effluent 85 mg/I. So, the BOD removal rate showed 97% in average. The SS-contents in the primary chamber was about 3,300 mg/I and that of effluent 92 mg/I. The SS removal efficiency showed 97%. The removal rate of total nitrogen and phosphore were in average of 82% respectively. Carrying out in winter season, it showed relatively good results; The design parameter approved in this test can be applied to the full-time farmers.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1649-1654
• /
• 2009

Induction motors widely use in industry because structure is simple and hard and cost is generally cheap and they are easy to control. In recently, because of saving steel, ventilation and benefit of frame fixing, rectangular core type induction motors use in industry more and more. This paper presents current characteristic according to stator core cutting degree in three-phase induction motor (IM) with rectangular stator core. According to stator cutting degree, magnetic saturation and paths of flux are changed. Because of these situations, phase currents are unbalance and are produced harmonic components and they cause decrease of efficiency. We analyze each $10^{\circ}$ from $0^{\circ}$ to $30^{\circ}$ using 2-D finite element analysis (FEA). Optimal stator cutting core degree selection supplies stable currents and efficiency improvement. In this paper, loss separation test was executed by IEEE Std. 112-98 Method B and we compare with the result of loss separation by Simulation using FEM and by Experiment.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2978-2982
• /
• 2013

A doubly tethered $N-CH_3$ amide chiral stationary phase (CSP 4) based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was applied to the resolution of an antiarrythmic agent, tocainide, and its analogues and the chromatographic resolution results were compared with those on a singly tethered N-H amide CSP (CSP 1), a singly tethered $N-CH_3$ amide CSP (CSP 2) and a doubly tethered N-H amide CSP (CSP 3) under an identical aqueous mobile phase condition. CSP 4 was found to be generally better than other CSPs in terms of the separation factors (${\alpha}$) and resolutions (RS). The retention times of analytes denoted by the retention factors ($k_1$) on CSP 4 were quite long compared to those on other CSPs because of the improved lipophilicity of CSP 4. The long retention times of analytes on CSP 4 were successfully controlled by the addition of a small amount of ammonium acetate to aqueous mobile phase without hurting the chiral recognition efficiency. The variation of the content and type of organic and acidic modifier in aqueous mobile phase was found not to change the chiral recognition efficiency significantly.

• 한국환경과학회지
• /
• 제19권1호
• /
• pp.89-96
• /
• 2010

The separation of $TiO_2$ wastewater carried out by an electrocoagulation/flotation process, which had various operating parameters. The effect of electrode material (aluminum and four dimensionally stable electrode), applied current (0.07~0.5 A), electrolyte concentration (0~1 g/L), solution pH (3~11), initial turbidity (1000~20000 NTU) and suspended solid concentration (5000~25000 mg/L) were evaluated. Turbidity removal efficiency of the soluble anode (aluminum), which could produce metal ions, was higher than that of the dimensionally stable electrode. Considering operation time, turbidity removal and electric power, optimum current was 0.19 A. The more NaCl dosage was high, the less electric power was required. However, optimum NaCl concentration was 0.125 g/L considered removal efficiency, operation time and cost. Initial $TiO_2$ concentration did not affected turbidity removal on the electrocoagulation/flotation operation. The electrocoagulation/flotation process was proved to be a very effective separation method in the removal of $TiO_2$ from wastewater.

• 전기전자학회논문지
• /
• 제21권3호
• /
• pp.288-296
• /
• 2017

The enhancement of photoluminescence of Au-$TiO_2$ nanoparticles by surface plasmon resonance has been studied extensively by experiment in recent years. For the purpose of optimizing the photoluminescence property of Au-$TiO_2$ nanoparticles, the manufacturing parameters related to the Au nanoparticles and $TiO_2$ nanoparticles need to be considered. In this paper, Drude model and Maier's effective volume method are used to analyze the variation of the metal nanoparticle radius, separation between metal nanoparticle and dielectric molecule, and total absorption cross-section with original radiative efficiency on the photoluminescence property of Au-$TiO_2$ nanoparticles. The results show that to obtain the optimized enhancement factor for photoluminescence process, the size of Au nanoparticle is about 13 - 20 nm, the separation between Au nanoparticle and $TiO_2$ molecule is about 5 -15 nm, the total absorption cross-section of $TiO_2$ molecules is about $1-100nm^2$ and the original radiative efficiency of $TiO_2$ molecule is weak about 0.001- 0.1. With these fabrication parameters, the photoluminescence property of Au-$TiO_2$ nanoparticles can be enhanced several thousand times compared to traditional $TiO_2$ nanoparticles.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제16권1호
• /
• pp.71-81
• /
• 2011

Cause of contamination in the study area nearby Jang Hang Refinery is dust scattering in refinery stack, and soil washing treatment is one of the proper technologies for soil remediation in this area. Site conditions frequently limit the selection of a treatment process. A treatment technology may be eliminated based on the soil classification or physicochemical characteristics of soil. This study was assessed the soil washing efficiency by conducting of soil characteristic analysis in the vicinity of Jang Hang Refinery Stack within a 2 km radius. Also, it was decided about remedial range with comparative analysis of As in soil by Korean Standard Test Method before/after revision, whereupon As concentration in soil showed a increasing tendency after revision. As a result, the soil washing using the size separation of soil was determined through identifying of As species in the soil. In this site, only particle size distribution and water content of soil can provide the initial means of screening for the potential use of soil washing.

• 한국표면공학회지
• /
• 제52권5호
• /
• pp.258-264
• /
• 2019

Assembling heterostructures by combining dissimilar oxide semiconductors is a promising approach to enhance charge separation and transfer in photoelectrochemical (PEC) water splitting. In this work, the CuO nanorods array/$Cu_2O$ thin film bilayered heterostructure was successfully fabricated by a facile method that involved a direct electrodeposition of the $Cu_2O$ thin film onto the vertically oriented CuO nanorods array to serve as the photoelectrode for the PEC water oxidation. The resulting copper-oxide-based heterostructure photoelectrode exhibited an enhanced PEC performance compared to common copper-oxide-based photoelectrodes, indicating good charge separation and transfer efficiency due to the band structure realignment at the interface. The photocurrent density and the optimal photocurrent conversion efficiency obtained on the CuO nanorods/$Cu_2O$ thin film heterostructure were $0.59mA/cm^2$ and 1.10% at 1.06 V vs. RHE, respectively. These results provide a promising route to fabricating earth-abundant copper-oxide-based photoelectrode for visible-light-driven hydrogen generation using a facile, low-cost, and scalable approach of combining electrodeposition and hydrothermal synthesis.