• 제목/요약/키워드: separation

검색결과 11,313건 처리시간 0.026초

임플란트 지대주 형태와 시멘트 종류에 따른 전부주조금관의 유지력 비교 (The Comparison of the Retention of the Full Veneer Casted Gold Crowns with Different Implant Abutment Shapes and Types of Cements)

  • 정재욱;김지환;김선재;문홍석;심준성
    • 구강회복응용과학지
    • /
    • 제25권4호
    • /
    • pp.403-415
    • /
    • 2009
  • 본 연구에서는 시멘트 유지형 임플란트에서 지대주의 수렴각과 시멘트 종류에 따라 보철물의 유지력에 미치는 영향에 대해 알아보고자 하였다. 임플란트 지대주와 유사한 외형을 갖는 금속 다이를 제작하였으며, 짧은 지대주(5mm)와 긴 지대주(10mm) 두가지로 설정하였으며, 각각 5, 10, 15, 25도의 수렴각을 갖는 금속 다이를 제작하였다. 금속 다이와 금속 다이로부터 제작한 금주조관을 Temp-bond, petroleum jelly를 일정 비율로 섞은 Temp-bond, ZPC, Premier implant cement로 합착시킨 후, 인장력에 대한 유지력을 측정하였다. 그 후 각각의 시멘트 군에서 수렴각의 변화가 유지력에 미치는 영향과 각 수렴각 군에서 시멘트의 변화가 유지력에 미치는 영향을 비교하였다. 또한 본 실험에서 사용된 시멘트 중 Premier implant cement의 변연 간격에 대한 연구를 추가적으로 시행하였으며, in-vitro 실험의 한계 내에서 다음과 같은 결론을 도출하였다. 1. Petroleum jelly를 첨가한 Temp-bond의 경우 각각 수렴각이 증가함에 따라 모든 경우에 유지력이 감소함을 보였으며, 시멘트 중 가장 낮은 유지력을 나타냈다. 2. ZPC의 경우 수렴각이 증가함에 따라 유지력의 감소를 보였으며, 수렴각이 5도인 경우 ZPC가 Premier implant cement보다 더 큰 유지력을 보였다. 3. Premier implant cement의 경우 수렴각이 5도일 때 가장 작은 유지력을 보이고 10도에서 가장 큰 값을 보인 후 수렴각이 증가할수록 유지력이 감소하는 양상을 보였다. 4. Premier implant cement의 경우 이번 실험의 조건 내에서 수렴각이 10도일 때보다 5도일 때 더 큰 변연 간격을 보였다.

효소적으로 합성된 대칭형과 비대칭형 Triacylglycerol 혼합물의 In Vitro Digestion에서의 소화율 비교 (Comparison of Hydrolysis from In Vitro Digestion Using Symmetric and Asymmetric Triacylglycerol Compounds by Enzymatic Interesterification)

  • 우정민;이기택
    • 한국식품영양과학회지
    • /
    • 제43권6호
    • /
    • pp.842-853
    • /
    • 2014
  • 본 연구는 고올레산 해바라기유(high oleic sunflower oil, HOSO), palmitic ethyl ester 및 stearic ethyl ester를 이용하여 대칭형 유지와 비대칭형 유지를 합성하였으며, 이를 이용하여 in vitro digestion에서의 소화율(%)을 비교하고자 하였다. 생성된 대칭형 유지와 비대칭형 유지는 acetone을 이용하여 분별함으로써 대칭형 유지는 I, II, III으로, 비대칭형 유지는 IV, V로 분별되었다. 그 후 분별물들을 이용하여 in vitro digestion을 진행함으로써 소화율(%)과 농도변화량(mg/mL/min)을 비교하였으며, 분별물들의 위치별 지방산 및 TAG 조성 분석, DSC를 통한 흡열 및 발열곡선 분석, solid fat index와 융점 측정을 통해 특성을 알아보고자 하였다. 위치별 지방산 조성 분석 결과 I, II, III은 sn-2 위치에 palmitic acid와 stearic acid의 합이 4.9~6.5 area%로 나타나 주로 대칭형 TAG로 이루어졌고, IV와 V는 41.9~43.9 area%로 나타나 주로 비대칭형 TAG로 구성되어 있는 것으로 확인되었다. 한편 in vitro digestion을 진행하여 분별물간의 가수분해율(%)을 비교한 결과, 반응시간 120분에서는 V만 다른 분별물에 비해 약 40% 정도 소화가 되지 않았으며, V의 융점이 $49^{\circ}C$로 반응온도($37^{\circ}C$)보다 높았다. 초기 반응시간(15분)에서는 I,II>IV>III>V 순으로 소화가 되지 않았으며, 각 분별물에서 ${\bigcirc}{\bigcirc}{\bigcirc}$와 POS/PSO의 가수분해율(%)을 비교해 본 결과 TAG 간의 가수분해율 차이가 없는 것으로 나타났다. 한편 III과 IV를 비교해 보았을 때, IV가 III에 비해 두 개의 포화지방산으로 구성된 TAG 함량이 약 40 area% 적지만 complete melting point가 III과 유사한 것으로 나타나 비대칭형 TAG가 대칭형 TAG에 비해 융점이 높다는 것을 알 수 있었다. 따라서 slip melting point가 in vitro digestion 결과에 가장 큰 영향을 미치며, 융점은 총지방산 조성에서의 포화지방산 함량이 높을수록, 두 개의 포화지방산으로 구성된 TAG의 함량이 높을수록, 비대칭형 TAG로 이루어질수록 높아짐을 알 수 있었다.

다분류 SVM을 이용한 DEA기반 벤처기업 효율성등급 예측모형 (The Prediction of DEA based Efficiency Rating for Venture Business Using Multi-class SVM)

  • 박지영;홍태호
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.139-155
    • /
    • 2009
  • For the last few decades, many studies have tried to explore and unveil venture companies' success factors and unique features in order to identify the sources of such companies' competitive advantages over their rivals. Such venture companies have shown tendency to give high returns for investors generally making the best use of information technology. For this reason, many venture companies are keen on attracting avid investors' attention. Investors generally make their investment decisions by carefully examining the evaluation criteria of the alternatives. To them, credit rating information provided by international rating agencies, such as Standard and Poor's, Moody's and Fitch is crucial source as to such pivotal concerns as companies stability, growth, and risk status. But these types of information are generated only for the companies issuing corporate bonds, not venture companies. Therefore, this study proposes a method for evaluating venture businesses by presenting our recent empirical results using financial data of Korean venture companies listed on KOSDAQ in Korea exchange. In addition, this paper used multi-class SVM for the prediction of DEA-based efficiency rating for venture businesses, which was derived from our proposed method. Our approach sheds light on ways to locate efficient companies generating high level of profits. Above all, in determining effective ways to evaluate a venture firm's efficiency, it is important to understand the major contributing factors of such efficiency. Therefore, this paper is constructed on the basis of following two ideas to classify which companies are more efficient venture companies: i) making DEA based multi-class rating for sample companies and ii) developing multi-class SVM-based efficiency prediction model for classifying all companies. First, the Data Envelopment Analysis(DEA) is a non-parametric multiple input-output efficiency technique that measures the relative efficiency of decision making units(DMUs) using a linear programming based model. It is non-parametric because it requires no assumption on the shape or parameters of the underlying production function. DEA has been already widely applied for evaluating the relative efficiency of DMUs. Recently, a number of DEA based studies have evaluated the efficiency of various types of companies, such as internet companies and venture companies. It has been also applied to corporate credit ratings. In this study we utilized DEA for sorting venture companies by efficiency based ratings. The Support Vector Machine(SVM), on the other hand, is a popular technique for solving data classification problems. In this paper, we employed SVM to classify the efficiency ratings in IT venture companies according to the results of DEA. The SVM method was first developed by Vapnik (1995). As one of many machine learning techniques, SVM is based on a statistical theory. Thus far, the method has shown good performances especially in generalizing capacity in classification tasks, resulting in numerous applications in many areas of business, SVM is basically the algorithm that finds the maximum margin hyperplane, which is the maximum separation between classes. According to this method, support vectors are the closest to the maximum margin hyperplane. If it is impossible to classify, we can use the kernel function. In the case of nonlinear class boundaries, we can transform the inputs into a high-dimensional feature space, This is the original input space and is mapped into a high-dimensional dot-product space. Many studies applied SVM to the prediction of bankruptcy, the forecast a financial time series, and the problem of estimating credit rating, In this study we employed SVM for developing data mining-based efficiency prediction model. We used the Gaussian radial function as a kernel function of SVM. In multi-class SVM, we adopted one-against-one approach between binary classification method and two all-together methods, proposed by Weston and Watkins(1999) and Crammer and Singer(2000), respectively. In this research, we used corporate information of 154 companies listed on KOSDAQ market in Korea exchange. We obtained companies' financial information of 2005 from the KIS(Korea Information Service, Inc.). Using this data, we made multi-class rating with DEA efficiency and built multi-class prediction model based data mining. Among three manners of multi-classification, the hit ratio of the Weston and Watkins method is the best in the test data set. In multi classification problems as efficiency ratings of venture business, it is very useful for investors to know the class with errors, one class difference, when it is difficult to find out the accurate class in the actual market. So we presented accuracy results within 1-class errors, and the Weston and Watkins method showed 85.7% accuracy in our test samples. We conclude that the DEA based multi-class approach in venture business generates more information than the binary classification problem, notwithstanding its efficiency level. We believe this model can help investors in decision making as it provides a reliably tool to evaluate venture companies in the financial domain. For the future research, we perceive the need to enhance such areas as the variable selection process, the parameter selection of kernel function, the generalization, and the sample size of multi-class.

터널 굴진면 전방에 위치한 연약대 폭과 이격거리에 따른 이완영역에 대한 실험적 연구 (Experimental study on the relaxation zone depending on the width and distance of the weak zone existing ahead of tunnel face)

  • 함현수;이상덕
    • 한국터널지하공간학회 논문집
    • /
    • 제20권5호
    • /
    • pp.855-867
    • /
    • 2018
  • 터널 굴진면 전방에 연약대가 존재할 때에는 종방향 아칭에 의해서 굴진면 직전영역에 응력이 증가되어 터널의 안정성이 영향을 받는다. 따라서 굴진면 전방에 연약대 존재 여부 및 연약대의 특성을 파악하여 이에 대한 대비책을 마련하는 것이 중요하다. 굴진면 전방 연약대의 예측 방법은 물리탐사 및 수치해석적 방법과 터널지보 및 보강방안에 대한 연구는 많이 이루어 졌으나 굴진면 전방 연약대의 폭과 이격거리에 따른 이완영역에 대한 연구는 미비한 실정이다. 본 연구에서는 굴진면 전방에 연약대 존재 시 연약대의 폭과 이격거리에 따른 이완영역에 대하여 실내모형실험을 통해 규명하였다. 모형시험기에 주문진 자연사를 이용하여 함수비 3.8%로 모형 원지반을 조성하였으며 모형 연약대는 모형 원지반과 같은 자연건조 상태의 주문진 자연사를 샌드커튼 방식으로 강사하여 조성하였다 연약대 폭과 굴진면과 연약대 간 이격거리를 변화시키며 실험을 수행하였다. 모형시험기는 상하반단면 굴착이 구현 가능하도록 제작하였으며, 토조 바닥에 로드셀을 설치하고 지표에 변위계를 설치하여 터널굴착에 따른 연직응력 및 지표변위를 측정하였다. 지표침하는 연약대의 폭에 상관없이 굴진면과의 이격거리가 0.25D 이내에서 급격히 증가하였고, 수직응력 및 수평응력 또한 이격거리가 0.5D 이내에서부터 증가하는 경향이 나타났다. 실험결과 종방향 아칭의 영향은 터널 전방 1.0D 영역 내부터 형성된다고 판단된다.

한의 진단의 추론형식과 실재성 (Inferential Structure and Reality Problem in Diagnosis of Oriental Medicine)

  • 박경모;최승훈;안규석
    • 제3의학
    • /
    • 제2권1호
    • /
    • pp.55-84
    • /
    • 1997
  • Inferential structure and reality problem is a serious issue to O.M.(oriental medicine). The study will analyze this issue through a philosophical and historical comparative study of W.M.M(Western modern medicine) and O.M. First, I presuppose some basic ideas. The first is the division of the 'the philosophy of medicine' and 'the medicine itself'. Second, there is a 'visibility' that discriminate between 'the abstractive concept' and 'the concrete object' in diagnostic terminology. The third is the separation of disease, the entity and disease, the phenomenon. Finally, the distinction between the cause of disease and the nature of disease. Through these basic concepts, this study will analyze O.M's diagnostic methodology, 'Pattern identification of the S.A.S(sign and symptom)'. The results are follows: 1. O.M's views disease as a phenomenon. So, the S.A.S, which is visible, is the disease itself. Tough the analysis and inference of the S.A.S, 證(zheng) the essence is derived. 2. 證(zheng) can be considered as 'the abstractive concept' reflecting the essence of a disease. 3. 證(zheng) is not arrived through causal sequence reasoning but rather by analogical reasoning. 4. 證(zheng) is 'the non-random correlative combination of S.A.S', pattern. These patterns secure the abstractive deduction in reality. that is, The causality, the positivism, the view of disease as entity, and anatomical knowledge are the traits peculiar to W.M.M. But, these properties can not be applied universally to every medical systems. Also, these properties do not indicate the superiority or inferiority of any medical system. 5. 證(zheng) summarizes the patients condition simultaneously with the S.A.S. However, 證(zheng) doesn't necessarily indicate the knowledge about the actual internal organ. That is, Early in O.M.'s history, the diagnostic terminologies including 證(zheng) were analogical reflections of a naive knowledge of internal organs and external environmental factors. Later, the naive knowledge in 證(zheng) changed int new nature, an abstractive concept. The confusion of the concept of disease, the indiscriminate acceptance of Western anatomical knowledge, and the O.M.'s theoretical evolution et are the challenge facing modern O.M. To find solutions, this study looks at the sequence of the birth of W.M.M. and then compares it's system with the O.M. system. The confusion of the concept of disease, the indiscriminate acceptance of Western anatomical knowledge, and the O.M.'s theoretical evolution et are the challenge facing modern O.M. To find solutions, this study looks at the sequence of the birth of W.M.M. and then compares it's system with the O.M. system. It is recommended that O.M. diagnostics should pay close attention to the ambiguity of the diagnostic methodology in order to further development. At present time, the concept and the system peculiar to O.M. can not be explained by common language. but O.M.'s practitioner can not persist in this manner an: longer. Along with the internal development of O.M., the adjustment of O.M.'s diagnostic terminology needs to be adopted.

  • PDF

X-ray Diffraction and Infrared Spectroscopy Studies on Crystal and Lamellar Structure and CHO Hydrogen Bonding of Biodegradable Poly(hydroxyalkanoate)

  • Sato Harumi;Murakami Rumi;Zhang Jianming;Ozaki Yukihiro;Mori Katsuhito;Takahashi Isao;Terauchi Hikaru;Noda Isao
    • Macromolecular Research
    • /
    • 제14권4호
    • /
    • pp.408-415
    • /
    • 2006
  • Temperature-dependent, wide-angle, x-ray diffraction (WAXD) patterns and infrared (IR) spectra were measured for biodegradable poly(3-hydroxybutyrate) (PHB) and its copolymers, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) P(HB-co-HHx) (HHx=2.5, 3.4, 10.5, and 12 mol%), in order to explore their crystal and lamellar structure and their pattern of C-H...O=C hydrogen bonding. The WAXD patterns showed that the P(HB-co-HHx) copolymers have the same orthorhombic system as PHB. It was found from the temperature-dependent WAXD measurements of PHB and P(HB-co-HHx) that the a lattice parameter is more enlarged than the b lattice parameter during heating and that only the a lattice parameter shows reversibility during both heating and cooling processes. These observations suggest that an interaction occurs along the a axis in PHB and P(HB-co-HHx). This interaction seems to be due to an intermolecular C-H...O=C hydrogen bonding between the C=O group in one helical structure and the $CH_3$ group in the other helical structure. The x-ray crystallographic data of PHB showed that the distance between the O atom of the C=O group in one helical structure and the H atom of one of the three C-H bonds of the $CH_3$ group in the other helix structure is $2.63{\AA}$, which is significantly shorter than the sum of the van der Waals separation ($2.72{\AA}$). This result and the appearance of the $CH_3$ asymmetric stretching band at $3009 cm^{-1}$ suggest that there is a C-H...O=C hydrogen bond between the C=O group and the $CH_3$ group in PHB and P(HB-co-HHx). The temperature-dependent WAXD and IR measurements revealed that the crystallinity of P(HB-co-HHx) (HHx =10.5 and 12 mol%) decreases gradually from a fairly low temperature, while that of PHB and P(HB-co-HHx) (HHx = 2.5 and 3.5 mol%) remains almost unchanged until just below their melting temperatures. It was also shown from our studies that the weakening of the C-H...O = C interaction starts from just above room temperature and proceeds gradually increasing temperature. It seems that the C-H...O=C hydrogen bonding stabilizes the chain holding in the lamellar structure and affects the thermal behaviour of PHB and its copolymers.

셀룰로식 (Cellulosic) 에탄올 생산 (Cellulosic Ethanol Production)

  • 정장호
    • KSBB Journal
    • /
    • 제23권1호
    • /
    • pp.1-7
    • /
    • 2008
  • 비록 전 세계적으로 많은 수의 소규모 시범 셀룰로식 에탄올 생산연구가 보고되고 있으며 셀룰로식 에탄올 생산을 위한 많은 연구들이 진행되고 있지만 현재까지 전분계나 설탕계 에탄올과 경쟁할 수 있을 정도의 경제적 생산이 가능한 상용화된 셀룰로식 에탄올 생산시설은 현재까지 보고 된 바 없다. 또한 일부 환경경제학자들은 옥수수 작물자체가 수확기까지 많은 양의 수분과 에너지를 필요로 하고 매년 토양을 침출시키는 작물이어서 환경적인 문제점을 불러 올 수 있다는 점, 이후 옥수수 바이오매스로부터 에탄올을 생산할 때까지 들어가는 에너지의 양이 높다는 점등을 지적하며 옥수수로부터의 에탄올대량생산에 신중해야 한다는 의견도 있다(24). 하지만 가까운 장래에 석유를 대체할 액체연료 중 에탄올이 가장 적합하다는 미국이나 유럽의 목표에 따라 옥수수 줄기나 잎을 이용한 셀룰로식 에탄올 생산계획은 계속해서 추진될 것으로 보이며 상용화도 미국정부의 계획대로라면 수년 내에 이루어 질 것으로 보인다. 셀룰로식 에탄올의 상용화를 위해서는 여러 점들을 고려하여야 한다. 첫째로, 분자 및 유전자 수준까지의 식물에 대한 이해가 필요하다. 왜냐하면 이러한 지식의 바탕에서 바이오매스를 효과적으로 정제할 수 있는 방안들이 가능하기 때문이다. 이를 위해서는 셀룰로스보다 상대적으로 덜 알려진 식물체 내에서의 리그닌 합성경로 및 결합구조나 헤미셀룰로스의 합성 및 리그닌과의 결합관계 둥에 대한 연구가 더욱 필요하다. 둘째로는 셀룰로식 에탄올생산의 상용화를 위해서는 화석연료의 수요를 대체할 수 있는 작물의 개발과 수확작물을 처리하여 공장이나 공업단지까지 경제적으로 수송할 수 있는 방법이 개발되어야 한다. 현재 거론되고 있는 셀룰로식 에탄올공장의 생산규모를 연간 1억 내지 1억 8천만 리터 정도의 규모로 생각하고 연간 250-300일 작업 기준으로 생각한다면 적어도 하루 2000톤 정도의 biomass를 처리하여야 됨으로 이 정도의 바이오매스가 지속적이고, 경제적으로 공급되어야 한다. 미국의 경우, 옥수수작물이 셀룰로식 에탄올 생산을 위해 가장 적합한 원료물질로 거론되고 있다. 이는 현재 옥수수 열매 는 전분이나 에탄올 생산을 위해 공장으로 수송되지만 엄청난 양의 잎과 줄기는 밭에 남겨져 있기 때문이다. 이들 corn stover로 통칭되는 식물원료 물질이 바이오매스 중 연간 생산량이 가장 많은 1억 건조 톤 이상으로 현재로도 공급이 가능하고 잠재적으로는 10억 톤까지도 생산될 수 있다고 전망하기 때문이다. 따라서 미국의 경우 셀룰로식 에탄올의 생산은 corn stover의 이용이 불가피해 보인다. 더불어 톱밥이나 임업부산물의 경우는 현재 3800만 건조 톤 정도의 공급이 가능하며 미래 3억 7000만 건조 톤이 공급될 수 있을 것으로 예상하고 있다(25). 하지만 이러한 자원은 부피가 크고 무게가 가벼워 수송밀도가 낮아 고밀도 형태로 운송할 수 있는 방법이 모색되어야 한다. 또한 원료물질을 처리 시설까지 운반하는 운송비를 줄일 수 이는 다른 방법들도 모색되어야한다. 셋째로는 바이오매스의 구조를 당화과정과 발효과정에 적합하게 변환시킬 수 있는 경제성 있는 전처리 방법의 개발이 필수적이다. 이상적 전처리 방법은 리그닌을 효과적으로 분리해내 이를 이용한 공정에 필요한 에너지로 사용하거나 차후 부가가치가 높은 물질의 원료로 사용할 수 있게 하여야 한다. 또한 헤미셀룰로스와 셀룰로스의 손실을 최소화하여 차후 이들 식물탄수화물을 이용한 에탄올 생산을 극대화할 수 있는 방법이어야 하며 이와 함께 경제성을 담보하여야 한다. 이러한 전처리방법의 개발은 현재까지 개발된 여러 전처리 방법들의 장단점들을 파악하고 이를 극복할 수 있는 방법들을 모색하는 노력으로 가능할 수 있겠다. 마지막으로 5탄당과 6탄당을 동시에 발효할 수 있는 미생물 균주의 개발이나 효소비용을 획기적으로 줄일 수 있는 생산방법이 개발되어야 하겠다. 이는 셀룰로식 에탄올이 90% 이상의 높은 수율과 시간당 1.5-2.5 g/L의 생산성을 보이고 있는 전분이나 설탕으로부터 생산되는 에탄올과 경쟁력을 갖기 위한 필수적인 요소이기 때문이다.

저유전체 고분자 접착 물질을 이용한 웨이퍼 본딩을 포함하는 웨이퍼 레벨 3차원 집적회로 구현에 관한 연구 (A Study on Wafer-Level 3D Integration Including Wafer Bonding using Low-k Polymeric Adhesive)

  • 권용재;석종원
    • Korean Chemical Engineering Research
    • /
    • 제45권5호
    • /
    • pp.466-472
    • /
    • 2007
  • 웨이퍼 레벨(WL) 3차원(3D) 집적을 구현하기 위해 저유전체 고분자를 본딩 접착제로 이용한 웨이퍼 본딩과, 적층된 웨이퍼간 전기배선 형성을 위해 구리 다마신(damascene) 공정을 사용하는 방법을 소개한다. 이러한 방법을 이용하여 웨이퍼 레벨 3차원 칩의 특성 평가를 위해 적층된 웨이퍼간 3차원 비아(via) 고리 구조를 제작하고, 그 구조의 기계적, 전기적 특성을 연속적으로 연결된 서로 다른 크기의 비아를 통해 평가하였다. 또한, 웨이퍼간 적층을 위해 필수적인 저유전체 고분자 수지를 이용한 웨이퍼 본딩 공정의 다음과 같은 특성 평가를 수행하였다. (1) 광학 검사에 의한 본딩된 영역의 정도 평가, (2) 면도날(razor blade) 시험에 의한 본딩된 웨이퍼들의 정성적인 본딩 결합력 평가, (3) 4-점 굽힘시험(four point bending test)에 의한 본딩된 웨이퍼들의 정량적인 본딩 결합력 평가. 본 연구를 위해 4가지의 서로 다른 저유전체 고분자인 benzocyclobutene(BCB), Flare, methylsilsesquioxane(MSSQ) 그리고 parylene-N을 선정하여 웨이퍼 본딩용 수지에 대한 적합성을 검토하였고, 상기 평가 과정을 거쳐 BCB와 Flare를 1차적인 본딩용 수지로 선정하였다. 한편 BCB와 Flare를 비교해 본 결과, Flare를 이용하여 본딩된 웨이퍼들이 BCB를 이용하여 본딩된 웨이퍼보다 더 높은 본딩 결합력을 보여주지만, BCB를 이용해 본딩된 웨이퍼들은 여전히 칩 back-end-of-the-line (BEOL) 공정조건에 부합되는 본딩 결합력을 가지는 동시에 동공이 거의 없는 100%에 가까운 본딩 영역을 재현성있게 보여주기 때문에 본 연구에서는 BCB가 본딩용 수지로 더 적합하다고 판단하였다.

왕겨/모래/왕겨 회재의 유동 및 혼합 특성 연구 (Flow Behavior and Mixing Characteristics of Rice Husk/Silica Sand/Rice Husk Ash)

  • 김보화;서명원;국진우;최희망;라호원;윤상준;문태영;김용구;이재구;이영우
    • Korean Chemical Engineering Research
    • /
    • 제54권4호
    • /
    • pp.533-542
    • /
    • 2016
  • Lab-scale 기포유동층 반응기(D=0.1 m, H=1.5 m)에서 왕겨와 모래를 혼합하여 가스화를 통해 합성가스를 얻고 남은 왕겨 회재는 고부가가치 물질로 사용하기 위한 연구의 선행연구로서 왕겨/유동사/왕겨 회재(실리카)의 혼합 및 유동 특성을 규명하였다. 왕겨/유동사를 5:95, 10:90, 20:80, 30:70의 부피비로 유속 범위(0~0.63 m/s)조건으로 수행하였으며, 또한 왕겨 회재는 왕겨를 기준으로 부피비 6%로 결정하였다. 왕겨/유동사, 왕겨/유동사/왕겨 회재의 혼합실험을 통해 왕겨 부피비 0%, 5%, 10%에서는 최소유동화속도가 0.19~0.21m/s임을 확인하였고, 20%일때는 0.3m/s로 증가하였으며, 30%일때는 분리현상이 나타나 최소유동화속도가 측정 되지 않았다. 또한, 실험데이터에 따라 Brereton과 Grace의 mixing index를 이용하여 각 조건 별로 mixing index값을 도출한 결과 왕겨/유동사의 혼합은 0.8~1, 왕겨/유동사/왕겨 회재의 혼합은 0.88~1 사이임을 확인하였다. 이를 통하여 왕겨/유동사의 혼합과 왕겨/유동사/왕겨 회재 혼합의 최적 조업조건을 도출할 수 있었으며, 운전조건을 결정할 수 있었다.

간 이식편의 체적 예측을 위한 2점 이용 간 분리 (Liver Splitting Using 2 Points for Liver Graft Volumetry)

  • 서정주;박종원
    • 정보처리학회논문지B
    • /
    • 제19B권2호
    • /
    • pp.123-126
    • /
    • 2012
  • 본 논문은 생체간이식 전에 복부 MDCT(Multi-Detector Computed Tomography) 영상에서 간 이식편의 체적을 간단하고 정확하게 계산하기 위하여 좌간과 우간을 나누는 방법을 제안하였다. 본 알고리즘은 기증자와 수혜자의 안전을 보장하기 위하여 시스템과 의료진의 상호작업을 최소화 하여 의료진이 수술 전 이식편의 판단을 정확하게 처리할 수 있도록 하였다. 간이 추출된 영상에 좌간과 우간을 나눌 수 있는 2점(중간 정맥(MHV: Middle Hepatic Vein) 내부의 한 점과 좌우문맥(PV: Portal Vein) 분지부에서 한 점)을 선택한다. 선택된 중간정맥 내부의 점을 이용하여 중간정맥을 자동 인식한 후 중간정맥을 기준으로 절개선을 결정하여 문맥 분지부의 한 점을 연결하는 절개면을 형성한다. 좌간과 우간의 체적과 간 전체에 대한 좌우간의 비율을 계산한다. 계산된 체적의 정확성을 입증하기 위해 진단 방사선과 의사가 수동으로 처리하여 계산한 체적과 함께 수술 중 획득한 실측무게와 비교하였다. 실측무게와 수동으로 예측된 체적 사이의 오차에 대한 평균${\pm}$표준편차는 $162.38cm^3{\pm}124.39$이고, 실측무게와 2점을 이용하여 예측된 체적과의 오차에 대한 평균${\pm}$표준편차는 $107.69cm^3{\pm}97.24$이다. 실측무게와 수동으로 예측된 체적의 상관관계는 0.79이고, 실측무게와 2점을 이용하여 예측된 체적의 상관관계는 0.87이다. 그리고 2점을 선택한 후 좌우간을 분할하여 체적을 계산하는 시간을 측정하여 수술실에서 실시간으로 처리 가능한지의 여부를 확인하였다. 한 데이터세트($149.17pages{\pm}55.92$) 당 처리 시간의 평균${\pm}$표준편차는 $57.28sec{\pm}32.81$이다.