• Communications for Statistical Applications and Methods
• /
• v.14 no.1
• /
• pp.183-193
• /
• 2007

This paper shows that a response function for the center of fuzzy output nay not be the same as that for the spread in a fuzzy linear regression model and then suggests a separate fuzzy regression model makes a distinction between response functions of the center and the spread of fuzzy output. Also we use a least squares method to estimate the separate fuzzy regression model and compare an accuracy of proposed model with another fuzzy regression model developed by Diamond (1988) and Kao and Chyu (2003).

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.226-233
• /
• 1999

When we numerically model the bridge under seismic condition, the full model combining the super-structure and the sub-structure is considered for the more accurate results than the separate model. In this case, the super-structure is connected with the sub-structure by the elastic pad shoe that is difficult to model, because it has the three translational elastic stiffness and the three rotational elastic stiffness. The two-node General Link element is derived in finite element equation representing such a pad shoe, and it is verified by comparing the one General Link element model with the corresponding three legacy spring element model. It is easy to model the pad shoe, if the General Link finite element is used. And the seismic analysis result of the bridge full model structure, which is modeled with the General Link element, has been compared with the one of the separate model structure. The present study gives. more conservative result than that of the separate model, which does not consider the dynamic behaviour of the sub-structure.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1372-1375
• /
• 2006

The simplified impedance model which can consider a combined flow condition was suggested. Although the strength and position of the shear layer cannot be obtained by a linear sum of two separate contributions when both flows occur together, it was simply assumed that the impedance under the combined flow follows from summing the separate flow impedance. To validate the simplified impedance model, acoustic properties of a concentric resonator was predicted and measured. The predicted transmission loss using the simplified model shows reasonable agreements with measurements. One can find that the simplified impedance model obtained by the superposition of the separate flow impedances can be adjusted to predict the acoustic properties of a concentric resonator.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.2
• /
• pp.301-314
• /
• 2007

The aim of this paper is to deal with a method to construct a separate fuzzy regression model with crisp input and fuzzy output data using a best response function for the center and the width of the predicted output. Also we introduce the crisp mean and variance of the predicted fuzzy value and also give some examples to compare a performance of the proposed fuzzy model with various other fuzzy regression model.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.1
• /
• pp.19-28
• /
• 2016

In the case of structural analysis for building structures, the super-structure and the sub-structure are analyzed by using separate structural models in the field because of time saving, facile result interpretation and easy analysis of dynamic behavior. However this separate structural model violated the compatibility condition of structural analysis and it can not consider the interaction of superand sub- structures. In the present study, the analysis results of this separate model were compared to those of the unified model of super- and sub- structures which can consider the interaction of super- and sub- structures and reflect the realistic boundary conditions. According to the comparison results, the the analysis model using separate models can underestimate the member force and deflection of structural members in the super-structures and overestimate the deflection and member force of sub-structures. Therefore, in the case of high-rise buildings, irregular shaped buildings, buildings which are expected to be affected by large differential settlement and remodeling buildings, the unified structural model for super- and sub- structures was recommended for structural analysis instead of the separate structural model.

• English Language & Literature Teaching
• /
• v.12 no.3
• /
• pp.123-145
• /
• 2006

The purpose of this study is to propose an efficient vocabulary assessment model in task-based language learning and to verify the viability of this assessment model. Bachman and Palmer (1996) pointed out the fact that many language tests focus on just one of the areas of language knowledge. However, researchers suggested that it is necessary to acknowledge the needs of several analytic scales, which can provide separate ratings for different components of the language ability to be tested. Although there were many studies which tried to evaluate the various aspects of vocabulary ability, most of them measured only one or two factors. Based on previous research, this study proposed an assessment model of general construct of vocabulary ability and tried to measure vocabulary ability in four separate areas. The subjects were two classes of university level Korean EFL students. They participated in small group discussion via synchronous CMC. One class used a lexically focused task, which was proposed by Kim and Jeong (2006) and the other class used a non-lexically focused task. The results showed that the students with a lexically focused task significantly outperformed those with a non-lexically focused task in overall vocabulary ability as well as four subdivisions of vocabulary ability. In conclusion, the assessment model of separate ratings is a viable measure of vocabulary ability and this can provide elaborate interpretation of vocabulary ability.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.16 no.2
• /
• pp.33-33
• /
• 1991

The management of enterprise knowledge has been increasingly important because knowledge emerges as the new basis of competition in postcapitalist society. One of the key issues in knowledge management is to put knowledge into a repository where it can be easily stored, reused, and recreated. This paper proposes a model repository and the corresponding knowledge management framework. The emphases of model repository is on abstraction knowledge in the form of schematic models. Two major benefits are model independence and model integration. A metaschema is constructed according to six conceptual components: separate unit, external link, internal link, separate unite descriptor, link descriptor, and composite descriptor, which can be applied for a variety of models. A prototype system with a case illustrates the practical usefulness of model repository for knowledge management

• Korean Management Science Review
• /
• v.16 no.2
• /
• pp.33-49
• /
• 1999

The management of enterprise knowledge has been increasingly important because knowledge emerges as the new basis of competition in postcapitalist society. One of the key issues in knowledge management is to put knowledge into a repository where it can be easily stored, reused, and recreated. This paper proposes a model repository and the corresponding knowledge management framework. The emphases of model repository is on abstraction knowledge in the form of schematic models. Two major benefits are model independence and model integration. A metaschema is constructed according to six conceptual components: separate unit, external link, internal link, separate unite descriptor, link descriptor, and composite descriptor, which can be applied for a variety of models. A prototype system with a case illustrates the practical usefulness of model repository for knowledge management.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.5
• /
• pp.225-234
• /
• 2018

Control flow errors are caused by the vulnerability of memory and result in system failure. Signature-based control flow monitoring is a representative method for alleviating the problem. The method commonly consists of two routines; one routine is signature update and the other is signature verification. However, in the existing signature-based control flow monitoring, monitoring target application is tightly combined with the monitoring code, and the operation of monitoring in a single thread is the basic model. This makes the signature-based monitoring method difficult to expect performance improvement that can be taken in multi-thread and multi-core environments. In this paper, we propose a new signature-based control flow monitoring model that separates signature update and signature verification in thread level. The signature update is combined with application thread and signature verification runs on a separate monitor thread. In the proposed model, the application thread and the monitor thread are separated from each other, so that we can expect a performance improvement that can be taken in a multi-core and multi-thread environment.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2622-2624
• /
• 2001

In this thesis, speaker separation is employed when speech from two talkers has been summed into one signal and it is desirable to recover one or both of the speech signals from the composite signal. This paper proposed the method that separated the summed speeches and proved the similarity between the signals by the cross correlation between the signals for exact between original signal and separated signal. This paper uses frequency sampling method based on sinusoidal model to separate the composite signal with vocalic speech and vocalic speech and noise masking method based on psycoacoustics model to separate the composite signal with vocalic speech and nonvocalic speech.