• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.11
• /
• pp.1291-1299
• /
• 2003

In order to design the better brassiere in terms of appearance and functions, various parameters of the materials should be considered; in this study, fatigue properties and subjective sensation of wing materials and its relation to the preference for a brassiere was investigated. After the survey of commercially available products, five elastic fabrics such as cotton, Modal, polyester, nylon, and Tactel, all of which contain 10% polyurethane, were chosen as specimens. Fabric growth were determined to evaluate fatigue properties. Qmax was determined to evaluate the warm-cool feeling. For the sensory test, semantic differential scale which contains 15 adjectives were developed. Fatigue properties were very similar at the 20% elongation irrespective of the duration of tension, but at 40% and 100% elongation, man made fabric showed less growth than cellulose fabrics. The factor analysis showed four factors such as sense of warmth, smoothness, weight and elasticity. Preference of the specimens was ranked in the order of Tactel>Modal>cotton>nylon>polyester.

• Food Science of Animal Resources
• /
• v.33 no.3
• /
• pp.363-368
• /
• 2013

The main attributes of yogurt that affect consumer satisfaction are taste, consistency, and a firm texture. This study evaluates the influence of xanthan gum, barley beta-glucan, and guar gum in concentrations of 0.05%, 0.1%, 0.2%, and 0.3% on probiotic yogurt. The set-type yogurt samples were prepared by using raw cow's milk. The statistical analysis showed that none of these gum additions had any marked effect on pH, titratable acidity, total solids content, and probiotic bacteria counts of yogurt samples. Evaluations for syneresis and water-holding capacity (WHC) in the yogurt samples were affected by the type and concentration of the stabilizer. Yogurts treated with 0.1% xanthan gum and 0.3% beta-glucan recorded the highest WHC and the least syneresis. The largest amount of gel firmness was recorded in yogurt samples treated with 0.2% xanthan gum and 0.3% beta-glucan. Yogurt samples treated with 0.1% xanthan gum and 0.3% beta-glucan were considered acceptable by trained panelists and gained the highest scores in sensory evaluations. The correlation coefficient between the amount of syneresis, WHC and stiffness of texture was significant compared to scores for sensory evaluation (p<0.01). Results for effects of guar gum on the tested parameters were contrary to the results expected from a gum. According to this study, the use of xanthan gum and beta-glucan are highly recommended for low-fat yogurt production.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.286-293
• /
• 2003

In cosmetic formulations, texture plays a key role in ingredient choice and formulation optimization. But texture parameters are often measured by sensorial analysis in the last stages of formulation development. Rheology or texture analysis, used separately, has the benefit of characterizing the behavior of raw materials (e.g. polymers) and controlling and predicting the stability of formulations. SEPPIC has developed rheology and texture analysis protocols to obtain a better understanding of the influence of raw materials on the cosmetic texture of formulations. When used in combination, these two methodologies are complementary and provide useful data regarding the impact of raw material choice on all the development steps: manufacturing procedure, formulation stability, skin feeling.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.2
• /
• pp.323-331
• /
• 2020

Objective: The present work was undertaken to determine the possibility of using xanthan and guar gums as stabilizers to enhance the yogurt quality. Methods: Yogurt was manufactured from standardized milk (3.5% fat, 8.5% solid-not-fat contents) with the addition of 2% to 3% starter culture. Enzyme-hydrolyzed xanthan gum (0.1%, 0.5%, 1.0%) and guar gum (0.1%, 0.5%, 1.0%) were added to the yogurt as stabilizers. Prepared yogurt samples were kept at refrigeration temperature (4℃±2℃) for 21 days and various quality and sensory parameters were studied at regular intervals (7 days). Results: Results showed that yogurt with 0.5% xanthan gum (T5) was best in terms of preventing syneresis and improving the viscosity, water holding capacity and texture of the product. Additionally, adding gums did not adversely affect the sensorial attributes of the product. Conclusion: Modified gums were found useful in augmenting yogurt quality and therefore addition of gums is highly recommended for manufacturing yogurt.

• Food Science of Animal Resources
• /
• v.41 no.6
• /
• pp.983-996
• /
• 2021

This study explored the physicochemical, textural, and sensorial properties of a meat analog (MA) as compared to beef and pork meats. Results illustrate that MA patties had lower moisture, fat, and protein content, as well as higher ash and crude fiber than beef and pork. Likewise, MA patties had a higher pH, lightness (L^*), and redness (a^*) than either beef or pork. Pork meat exhibited the highest released water (RW) and cooking loss (CL) values, followed closely by MA with beef displaying the lowest values. Regardless of patty type, the post-cooking diameter patties were reduced significantly (p<0.05). However, the Warner-Bratzler shear force (WBSF), hardness, chewiness, and gumminess of beef were significantly higher than that of either pork or MA. The visible appearance of MA patties had more porous and loose structures before and after cooking. Consequently, based on sensory parameters, MA patties demonstrated the higher values for appearance and firmness, followed by beef and pork respectively, although the difference was not statistically significant. Therefore, the current study demonstrated that some physicochemical, textural, and sensory characteristics of beef and pork exhibited the most similarity to MA.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.5
• /
• pp.702-708
• /
• 2016

Aloe vera has been used worldwide for pharmaceutical, food, and cosmetic industries due to its wide biological activities. However, quality improvement of low fat meat products and their acceptability with added Aloe vera gel (AVG) is scanty. The aim of this study was to explore the feasibility of using fresh AVG on physicochemical, textural, sensory and nutritive qualities of goat meat nuggets. The products were prepared with 0%, 2.5%, and 5% fresh AVG replacing goat meat and were analyzed for proximate composition, physicochemical and textural properties, fatty acid profile and sensory parameters. Changes in lipid oxidation and microbial growth of nuggets were also evaluated over 9 days of refrigerated storage. The results showed that AVG significantly (p<0.05) decreased the pH value and protein content of meat emulsion and nuggets. Product yield was affected at 5% level of gel. Addition of AVG in the formulation significantly affected the values of texture profile analysis. The AVG reduced the lipid oxidation and microbial growth in nuggets during storage. Sensory panelists preferred nuggets with 2.5% AVG over nuggets with 5% AVG. Therefore, AVG up to 2.5% level could be used for quality improvement in goat meat nuggets without affecting its sensorial, textural and nutritive values.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.11
• /
• pp.1630-1636
• /
• 2013

An investigation was carried out to assess the carcass characteristics and meat quality aspects of immunocastrated male pigs of medium genetic potential for lean meat deposition in carcass (53 to 55%). When the crossbred Large White x Landrace pigs (n = 45) were 70 days old, they were distributed in a totally randomized design in three treatments (castrated males, females and immunocastrated males) with three replicates of five animals. The pigs were slaughtered when they were 140 days old. Carcass temperature and pH were recorded twice, at 45 min and 24 h after slaughter. The carcasses were evaluated for hot and cold carcass yield, commercial cuts yield, length and depth, back fat thickness, loin eye area and lean meat percentage. The Longissimus dorsi muscle was extracted for analysis of color ($L^*$, $a^*$, $b^*$), exudate loss, cooking loss and centesimal and sensorial analysis of the meat. There were no significant differences for the evaluated parameters between castrated males, immunocastrated males and females, except for backfat thickness between the 7th and 8th thoracic vertebra and the point P2 (lower for immunocastrated males) and carcass temperature at 45 min post slaughter (higher in immunocastrated males), however, this did not interfer with the rate of pH decrease post mortem and the meat quality. The results from this research did not indicate a benefit of immunocastration on carcass characteristics of pigs of medium genetic potential for lean meat deposition in carcass, when compared to surgical castration.

• Korean journal of food and cookery science
• /
• v.26 no.3
• /
• pp.300-306
• /
• 2010

Arabica coffee has been classified for trading according to the New York Board of Trade (NYBOT) green coffee classification. The aim of the present study is to evaluate the physiochemical and sensorial characteristics of coffees classified by NYBOT as NY2 (specialty coffee), NY3/4 and NY4/5 (commercial coffee). The density of green coffee was higher for the NY2 sample. The amount of total solids in brewed coffee increase as the green coffee grade decreased and the pH levels decreased as the coffee grade decreased. Descriptive analysis using a 15cm line scale was carried out by 12 trained panelists prepared by espresso coffee and consumer preference tests were carried out by 168 consumers. The NY2 sample had the highest fruity, acidity, sweetness and aftertaste characteristics. In addition, green, rio, sour and astringency characteristics increased as the coffee grade decreased. Acceptance of aroma, flavor, taste balance and overall were higher for the NY2 sample. In the consumer preference test, the NY2 and NY4/5 samples had a similar distribution, but consumers between the ages of 20 to 30 who like to drink brewed coffee more than instant coffee preferred the NY2 than sample over the NY3/4 sample. In conclusion, significant differences were observed among the three groups of green coffee classification in all physicochemical and sensory parameters.

• Food Science of Animal Resources
• /
• v.39 no.1
• /
• pp.23-34
• /
• 2019

Fat reduction in the formulation of cheese emulsion causes problems in its flowability and functional characteristics during spray-dried cheese powder production. In order to eliminate these problems, the potential of using microparticulated whey protein (MWP) in cheese emulsions was examined in this study. Reduced-fat white-brined cheese emulsions (RF) with different dry-matters (DM) (15%, 20%, and 25% excluding emulsifying salt) were produced using various MWP concentrations (0%-20% based on cheese DM of emulsion). Their key characteristics were compared to full-fat cheese emulsion (FF). MWP addition had no influence on prevention of the phase separation observed in the instable group (RF 15). The most notable effect of using MWP was a reduction in apparent viscosity of RF which significantly increased by fat reduction. Moreover, increasing the amount of MWP led to a decrease in the values of consistency index and an increase in the values of flow behavior index. On the other hand, using high amounts of MWP made the emulsion more liquid-like compared to full-fat counterpart. MWP utilization also resulted in similar lightness and yellowness parameters in RF as their full-fat counterparts. MWP in RF increased glossiness and flowability scores, while decreased mouth coating scores in sensory analyses. Fat reduction caused a more compact network, while a porous structure similar to FF was observed with MWP addition to RF. In conclusion, MWP showed a good potential for formulation of reduced-fat cheese emulsions with rheological and sensorial characteristics suitable to be used as the feeding liquid in the spray drying process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.7
• /
• pp.1191-1201
• /
• 2020

Objective: The aim of this study was to evaluate the chemical-nutritional parameters, oxidative stability and volatile profile of eggs and cakes made with eggs from laying hens fed with a dietary supplementation of extruded linseed. Methods: Two thousand ISA Warren laying hens were randomly divided into two groups: a control group was fed with a standard diet while the experimental group received the same diet supplemented with 7% of extruded linseed. The trial lasted 84 days, in which three samplings of laid eggs were performed. Samples of eggs and food systems arising from eggs were then analyzed in order to obtain information about β-carotene and total flavonoid content, antioxidant activity, fatty acid profile, lipid oxidation, and volatile profile. Results: Linseed induced the increase of α-linolenic acid with consequent reduction of the ω-6/ω-3 ratio (4.3:1 in egg yolk); in addition to this, was evidenced the cholesterol reduction and the significant increase in total flavonoids and β-carotene, although no variations were detected in antioxidant capacity. Even in cooked products there was not only a direct effect of linseed in increasing α-linolenic acid, but also in inducing the reduction of cholesterol and its major oxidation product, 7-ketocholesterol. The dietary linseed integration was also shown to affect the volatile profile of baked products. Conclusion: Data confirmed that dietary supplementation with extruded linseed resulted in food products with interesting implications for human health. With regard to the volatile profile of baked products it would be necessary undertake further sensorial analysis in order to evaluate any variations on flavor and consumer acceptability.