• Korean Journal of Construction Engineering and Management
• /
• v.25 no.3
• /
• pp.68-82
• /
• 2024

The planning stage of laser scanning is crucial for acquiring high-quality 3D source data. It involves assessing the target space's environment and formulating an effective measurement strategy. However, existing practices often overlook on-site conditions, with decisions on scanner deployment and scanning locations relying heavily on the operators' experience. This approach has resulted in frequent modifications to scanning locations and diminished 3D data quality. Previous research has explored the selection of optimal scanner locations and conducted preliminary reviews through simulation, but these methods have significant drawbacks. They fail to consider scanner inaccuracies, do not support the use of multiple scanners, rely on less accurate 2D drawings, and require specialized knowledge in 3D modeling and programming. This study introduces an optimization technique for laser scanning planning using 3D simulation to address these issues. By evaluating the accuracy of scan data from various laser scanners and their positioning for scanning a retaining wall structure in a small-scale building, this method aids in refining the laser scanning plan. It enhances the decision-making process for end-users by ensuring data quality and reducing the need for plan adjustments during the planning phase.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1920-1926
• /
• 2006

With social interest, there hie been a lot of research on the Service Robot but now we are faced with the limitation of single platform. The alternative plan is the Ubiquitous-based Service Robot connected with a Ubiquitous network to overcome this limitation. Systems using RFID(Radio frequency Identification) and supersonic waves appeared for functions such as recognition of surroundings through Ubiquitous Sensor Networks. This was applied to the real robot and we have got good results. However, this has several limitations to applying to low power-based Sensor Network For example, if RFID uses a passive Sensor, the rate of recognition with the distance is limited. In case of supersonic waves, high power is required to drive them. Therefore, we intend to develop RSSI position recognition system on the basis of embodying a Sensor Network Module in this thesis. This RSSI position recognition system only measures RSSI of signals from each sensor nod. then converts them into distances and calculates the position. As a result, we can still use low power-based Sensor Network and overcome the limitation according to distance as planning Ad-Hoc Network.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.6
• /
• pp.569-577
• /
• 2015

The navigation algorithm developed based on the extended Kalman filter (EKF) sometimes diverges when the linearity between the measurements and the states is not preserved. In this study, new update conditions together with two conditions from previous study for gravity gradient referenced navigation (GGRN) were deduced for the filter performance. Also, the effect of each update conditions was evaluated imposing the various magnitudes of the database (DB) and the sensor errors. In case the DB and the sensor errors were supposed to 0.1 Eo and 0.01 Eo, the navigation performance was improved in the eight trajectories by using part of gravity gradient components that independently estimate states located within trust boundary. When applying only the components showing larger variation, around 200% of improvement was found. Even the DB and sensor error were supposed to 3 Eo, six update conditions improved performance in at least seven trajectories. More than five trajectories generated better results with 5 Eo error of the DB and the sensor. Especially, two update conditions successfully control divergence, and bounded the navigation error to the 1/10 level. However, these update conditions could not be generalized for all trajectories so that it is recommended to apply update conditions at the stage of planning, or as an index of precision of GGRN when combine with various types of geophysical data and algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.1929-1950
• /
• 2020

Reliable and secure data transmission in the application environment assisted by the wireless sensor network is one of the major challenges. Problem like blind forwarding and data inaccessibility affect the efficiency of overall infrastructure performance. This paper proposes routing protocol for forwarding and error recovery during packet loss. The same is achieved by energy and hops distance-based formulation of the routing mechanism. The reachability of the intermediate node to the source node is the major factor that helps in improving the lifetime of the network. On the other hand, intelligent hop selection increases the reliability over continuous data transmission. The number of hop count is factor of hop weight and available energy of the node. The comparison over the previous state of the art using QualNet-7.4 network simulator shows the effectiveness of proposed work in terms of overall energy conservation of network and reliable data delivery. The simulation results also show the elimination of blind forwarding and data inaccessibility.

• Journal of Korea Multimedia Society
• /
• v.24 no.8
• /
• pp.1138-1148
• /
• 2021

In this study, we developed a 'shared-use mobility'-mounted local particulate matter monitoring terminal technology to measure the actual particulate matter concentration around me. As a mobile terminal device in the form of an IoT sensor platform, it is designed to be separated into a control module and a sensor module to minimize interference between sensors and to consider the optimal observation position of each sensor. As a result of the field test, it was confirmed that particulate matter was locally different depending on time and space even within the same area. In addition, it was confirmed that the concentration of particulate matter in the relevant section differed by up to 100 times compared to the surrounding area due to specific sources of particulate matter such as unpaved roads. In addition, we positively reviewed the applicability of the service in the real-time metaverse environment using this result. Through technological advancement and application of multiple shared-use mobilities, we expect to be able to provide new services for practical smart city air environment monitoring, such as localized particulate matter information, air pollution event information, and identification of causes of particulate matter.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.169-178
• /
• 2023

Wireless sensor network is wieldy use for IoT application. The sensor node consider as physical device in IoT architecture. This all sensor node are operated with battery so the power consumption is very high during the data communication and low during the sensing the environment. Without proper planning of data communication the network might be dead very early so primary objective of the cluster based routing protocol is to enhance the battery life and run the application for longer time. In this paper we have comprehensive of twenty research paper related with clustering based routing protocol. We have taken basic information, network simulation parameters and performance parameters for the comparison. In particular, we have taken clustering manner, node deployment, scalability, data aggregation, power consumption and implementation cost many more points for the comparison of all 20 protocol. Along with basic information we also consider the network simulation parameters like number of nodes, simulation time, simulator name, initial energy and communication range as well energy consumption, throughput, network lifetime, packet delivery ration, jitter and fault tolerance parameters about the performance parameters. Finally we have summarize the technical aspect and few common parameter must be fulfill or consider for the design energy efficient cluster based routing protocol.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.150-158
• /
• 2009

For the autonomous movement, the optimal path planning connecting between current and target positions is essential, and the optimal path of mobile robot means obstacle-free and the shortest length path to a target position. Many actual mobile robots should move without any information of surrounded obstacles. Thus, this paper suggests new methods of path planning and obstacle avoidment, suitable in unknown environments. This method of path planning always tracks the local target expected as the optimal one, and the result of continuous tracking becomes the first generated moving path. This path, however, do not regard the collision with obstacles. Thus, this paper suggests a new method of obstacle avoidance resembled with the Potential Field method. Finally, a simulation confirms the performance and correctness of the path planning and obstacle avoidance, suggested in this paper.

• Journal of the Korea Society for Simulation
• /
• v.18 no.4
• /
• pp.67-79
• /
• 2009

Because a product in the car industry has a short life cycle in recent years, the process planning and the manufacturing lines have to be changed frequently. Most of time, repositioning an existing facility and modifying used control information are faster than making completely new process planning. However, control information and control code such as PLC code are difficult to understand. Hence, industries prefer writing a new control code instead of using the existing complex one. It shows the lack of information reusability in the existing process planning. As a result, to reduce this redundancy and lack of reusability, we propose a SOS-Net modeling method. SOS-Net is a standard methodology used to describe control information. It is based on the Device Structure which consists of sensor information derived from device hardware information. Thus, SOS-Net can describe a real control state for automated manufacturing systems. The SOS-Net model is easy to understand and can be converted into PLC Code easily. It also enables to modify control information, thus increases the reusability of the new process planning. Proposed model in this paper plays an intermediary role between the process planning and PLC code generation. It can reduce the process planning and implementation time as well as cost.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.6986-6992
• /
• 2014

The generalized Voronoi graph (GVG) is a topological map of a constrained environment. This is defined in terms of workspace distance measurements using only sensor-provided information, with a robot having a maximum distance from obstacles, and is the optimum for exploration and obstacle avoidance. This is the safest path for the robot, and is very significant when studying the GVG edges of highly articulated robots. In previous work, the point-GVG edge and Rod-GVG were built with point robot and rod robot using sensor-based control. An attempt was made to use a higher degree of freedom robot to build GVG edges. This paper presents GVG-based a new local roadmap for the two-link robot in the constrained two-dimensional environment. This new local roadmap is called the two-identical-link generalized Voronoi graph (L2-GVG). This is used to explore an unknown planar workspace and build a local roadmap in an unknown configuration space $R^2{\times}T^2$ for a planar two-identical-link robot. The two-identical-link GVG also can be constructed using only sensor-provided information. These results show the more complex properties of two-link-GVG, which are very different from point-GVG and rod-GVG. Furthermore, this approach draws on the experience of other highly articulated robots.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1958-1959
• /
• 2006

This paper proposes a local path-planning algorithm that enables a mobile robot with vision sensor in a local area.The proposed method based on projective geometry and a wavefront method finds local-paths to avoid collisions using 3-D walls or obstacles map generated using projective geometry. Simulation results show the feasibility of the proposed method