• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.302-307
• /
• 2005

Love wave and Rayleigh wave are the major elastic waves belonging to the category of the surface wave. The fact that Love wave is not contaminated by P-wave which makes Love wave superior to Rayleigh wave and other body waves. Therefore, the information that Love wave carries is more distinct and clearer than the information of Rayleigh wave. Based on theoretical research, the joint inversion analysis which is used both Love wave dispersion information and Rayleigh wave dispersion information was proposed. Purpose of the joint inversion analysis is to improve accuracy and convergency of inversion results utilizing that frequency contribution of each wave is different. This analysis technique is consisted of the forward modeling using transfer matrix, the sensitivity matrix determined to the ground system and DLSS(Damped Least Square Solution) as a inversion technique. The application of this analysis was examined through the field test.

• Bulletin of Food Technology
• /
• v.10 no.1
• /
• pp.115-120
• /
• 1997

면역분석법(immunoassay)은 aflatoxin류, deoxynivalenol(DON), zearalenone(ZEA), fumonisin류 등을 포함하는 다양한 진균독소분석에 적용되고 있다. 이들 분석법을 이용하여 여러 종류의 matrix내에 존재하는 물질들을 분석할 수 있다. 그리고 많은 시료를 빨리 분석해야 하는 경우에 이 방법이 적용되고 있다. 상업적인 면역화학적 분석키트들은 흔히 검출감도(sensitivity), 특이성(specificity), 재현성(reproducibility), 비용(cost), 안정성(stability), 편리성(ease of use)등의 관점에서 평가된다. 실험실적으로 품질보증을 위하여 표준곡선과 양성대조구 등에 대한 사전 검토가 필수적이다. 또한 높은 농도의 분석물의 경우에는 matrix에서 기인한 간섭때문이 아닌지를 구분하는 것도 중요하다. 본문에서 곡류와 곡류가공품 및 특정의 감시대상물 질내 aflatoxin류, DON, ZEA 그리고 fumonisin류와 같은 진균독소의 분석에 면역화학적 방법을 사용하여 얻어진 공동연구의 결과에 대한 해석기준이 제시된다. 또한 yes/no로 구분해야 하는 정성시험의 결과해석에 필요한 기준이 제시된다. 진균독소의 면역분석법을 평가하기 위한 몇몇기준들과 그 방법들을 감시도구로 사용하는 예는, 식품중의 잔류농약을 검출하기 위한 접근방법과 유사한 모델로서 활용될 수 있을 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.332-335
• /
• 1995

A simple and effective method for improving Euclidean norm condition number for chemical processing system is presented. The singular value sensitivities of Freudenberg et al. (1982) is used to estimate the behavior of singular values of process transfer function matrix when design parameter is changed, then the condition number can be calculated straightforwardly. The method requires explicit dependencies of each transfer function matrix elements on design parameters. These dependencies can be obtained either by symbolic differentiation in the form of explicit function of design parameters, or by numerical perturbation studies for units with large and complicated models. Gerschgorin-type lower bound for minimum singular value is introduced to detect the large divergencies near singular point due to linearity of sensitivities. The case studies are performed to show the efficiency of the proposed method.

• Journal of Aerospace System Engineering
• /
• v.2 no.3
• /
• pp.19-23
• /
• 2008

We have fabricated pressure sensitive paint films consisting of PtTFPP activators dispersed in fluorinated polymer matrix. This matrix material is unique in its composition and structure. We evaluated the oxygen quenching effects, and thus the pressure sensitivity, of the fabricated films in terms of various processing parameters. Based on the experimental results, we anticipate that a good but new pressure sensitive paint would be presented through further elaboration of the polymer compositions and optimization of the processing conditions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.864-869
• /
• 2004

A novel concept of feedback loop design for modal test and model updating is proposed. This method uses the closed -loop natural frequency information for parameter modification to overcome the problems associated with the conventional method employing the modal sensitivity matrix. To obtain new modal information from closed-loop system, controllers should be effective in changing modal data while guaranteeing the stability of closed-loop system. It is very hard to guarantee the stability of the closed-loop system with non-collocated sensor and actuator set. Ill this research, we proposed a controller called mode-decoupling controller that can change a target mode as much as the designer wants guaranteeing the stability of closed-loop system. This controller can be computed just using measured open-loop modeshape matrix. A simulation based on time domain input/output data is performed to check the feasibility of proposed control method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.2
• /
• pp.174-180
• /
• 1998

Robust stability of discrete-time regulators which utilize state predictors to compensate computation delays is considered. Novel expressions for the return difference matrices and the complementary sensitivity matrices at the input and the output of the regulator are found to obtain simple bounds for unstructured perturbations. Robust stability for pertubations of the system matrix and /or the gain matrix is also considered. under certain restriction on the nominal system simple bounds for the pertubations are obtained directly from the characteristic equation. It is shown that as far as the effect of the computation delays concerns these bounds have explicit relation to those for the unstructured pertubations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1426-1435
• /
• 2003

Design goal is to find the one that has the highest probability of success and the smallest variation. A robustness index has been proposed to satisfy these conditions. The two-step optimization process of the target problem requires a scaling factor. The search process of a scaling factor is replaced with the making of the decoupled design between the mean and the standard deviation. The decoupled design matrix is formed from the sensitivity or the sum of squares. After establishing the design matrix, the robust design process has a new three-step one. The first is ″reduce variability,″ the second is ″make the candidate designs that satisfy constraints and move the mean on the target,″ and the final is ″select the best robust design using the proposed robustness index.″ The robust design process is verified by three examples and the results using the robustness index are compared with those of other indices.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1009-1016
• /
• 2000

This paper describes the procedure of increasing the efficiency of experimental modal analysis and updating the quality of FE model using the scaled commercial vehicle frame. In this study, it was found that the experimental modal analysis could be more efficient when the measurements were made on the areas with high kinetic energies. Such areas could be located with the aid of FE modal analysis. Also, the number of measurement points could be decided by considering the dynamic characteristics of full FE model. The correlation of FE model and experimental modal analysis was assessed by the differences between the natural frequencies and MAC matrix, which is based on normal modes. These differences of modal parameters were reduced through the sensitivity and optimization analysis of which objective function consisted of the errors of natural frequencies and the diagonal terms of MAC matrix.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.955-961
• /
• 2004

A novel concept of feedback loop design for modal test and model updating is proposed. This method uses the closed-loop natural frequency information for parameter modification to overcome the problems associated with the conventional method employing the modal sensitivity matrix. To obtain new modal information from closed-loop system, controllers should be effective in changing modal data while guaranteeing the stability of closed-loop system. But it is very hard to guarantee the stability of the closed-loop system with non-collocated sensor and actuator set. In this research, we proposed a controller called mode-decoupling controller that can change a target mode as much as the designer wants guaranteeing the stability of closed-loop system. This controller can be computed Just using measured open-loop modeshape matrix. A simulation based on time domain input/output data is performed to check the feasibility of proposed control method.

• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.2
• /
• pp.132-139
• /
• 2007

This study was performed to apply the more rapid and accurate sample preparation, and the high selectivity and sensitivity of the analyte detection by gas chromatography-triple quadrupole mass spectrometry (GC-MS/MS). QuEChERS (quick, easy, cheap, effective, rugged and safe) method was validated for 49 agrochemicals in the CORESTA Agrochemical Advisory Committee guide and amenable to GC-MS/MS determination. In QuEChERS method, the effects of sorbents (PSA, $C_{18}$ and GCB) and matrix of the analytes in tobacco types (flue-cured, burley and oriental) were investigated. MS/MS acquisition provided high specificity and selectivity for agrochemicals and low limit of quantification. QuEChERS by using PSA alone and the matrix-matched standards gave good recoveries and RSD values in three types of tobaccos. QuEChERS method was no needed to be complex clean-up procedure and would be used as the fast and easy method for agrochemical residue analysis in tobacco.