• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1619-1624
• /
• 2008

현재 유비쿼터스 서비스를 제공하기 위해 GPS(Global Positioning System), RFID(Radio Frequency IDentification) 및 센서 네트워크를 이용한 개별 미들웨어 및 인터페이스를 개발하고 있다. GPS는 주로 위치기반 서비스에, RFID를 식별을 통한 유통 물류 서비스에, 센서 노드는 온도, 습도, 기압 등의 상황 정보 수집에 응용되고 있다. 최근에 2 또는 3개의 이들 요소들이 농축산, 건설, 의료 등의 다양한 분야에 응용하면서 GPS, RFID 및 센서 노드를 통합하는 인터페이스 요구가 증가하고 있다. 이에 본 논문에서는 RFID, GPS, 센서 네트워크에서 수집된 상황데이터를 통합 처리하는 공통 인터페이스를 구현하고 실험을 통해 동작을 확인한다. 이 인터페이스는 필터링, 파싱, 인터페이스 관리, 큐잉, 하드웨어 및 미들웨어 접근 기능 등의 효율적인 데이터 처리 기능을 구현하고 동작을 검증한다. 그리고 GPS, RFID 및 센서 노드를 수집된 상황 데이터를 결합한 통합 프레임 구조를 제시하고, 복합형 유비쿼터스 응용 시스템에 제공되는 개방형 인터페이스를 제공하는 것을 확인한다. 이를 통하여 RFID, GPS, 센서 네트워크를 통해 얻어진 상황 데이터도 효과적으로 처리하여 다양한 유비쿼터스 응용 서비스에게 제공할 수 있을 것으로 사료된다.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.432-442
• /
• 2023

Characterizing the behavior of nuclear reactor plate fuels is vital to the progression of advanced fuel systems. The states of pre- and post-irradiation plates need to be determined effectively and efficiently prior to and following irradiation. Due to the hostile post-irradiation environment, characterization must be completed remotely. Laser-based characterization techniques enable the ability to make robust measurements inside a hot-cell environment. The Laser Shock (LS) technique generates high energy shockwaves that propagate through the plate and mechanically characterizes cladding-cladding interfaces. During an irradiation campaign, two Idaho National Laboratory (INL) fabricated MP-1 plates had a fuel breach in the cladding-cladding interface and trace amounts of fission products were released. The objective of this report is to characterize the cladding-cladding interface strengths in three plates fabricated using different fabrication processes. The goal is to assess the risk in irradiating future developmental and production fuel plates. Prior LS testing has shown weaker and more variability in bond strengths within INL MP-1 reference plates than in commercially produced vendor plates. Three fuel plates fabricated with different fabrication processes will be used to bound the bond strength threshold for plate irradiation insertion and assess the confidence of this threshold value.

• Composites Research
• /
• 제27권6호
• /
• pp.219-224
• /
• 2014

탄소나노튜브(CNT)의 물성은 고분자재료의 기계적, 전도성, 열적 물성을 향상시켜주기 때문에 많은 분야에서 소재개발을 진행 중이다. 본 연구에서는 사전에 CNT 10 wt% 페이스트를 제조하여 나노입자에 대한 분산도와 나노복합재료 생산성을 높일 수 있는 기초 재료를 제조하였다. 제조된 CNT 10 wt% 페이스트를 이용하여 손상 감지용 CNT 나노복합재료를 제조하여 균열에 대한 손상감지능과 균열 보강효과에 대한 영향을 연구하였다. CNT 10 wt% 페이스트를 이용하여 제조된 CNT 1 wt% 나노복합재는 일반 CNT 파우더를 이용하여 CNT 1 wt% 나노복합재료를 제조하였을 경우보다 인장과 굴곡물성이 높음을 확인하였다. CF30wt%/PP에 인위적인 균열을 제조하고, 균열부위에 CNT 나노복합재료를 보강하여 균열 및 파괴 발생 감지능을 균열크기에 따라 전기저항 측정법과 인장물성평가를 통해 분석하였다. CNT 나노복합재료를 균열 부위에 보강하여 CF30wt%/PP의 인장물성을 분석하였을 경우, 균열보강효과가 있었다. 균열크기가 증가함에 따라 CNT 나노복합재료의 보강효과의 증가되었다. 이는 CNT 나노복합재료와 CF30wt%/PP간의 접착면 증가로 균열전파를 지연하기 때문이다. CNT 나노복합재료의 손상감지능에 대해서는 전기저항 평가법으로 분석하였으며, 접착면에서의 분리로 인해 CNT 나노복합재료에 충격이 가해져 높은 전기저항 증가구간을 확인하였다. 손상감지용 CNT 나노복합재료의 균열방지효과와 손상감지에 대한 전기저항 평가법의 가능성을 확인하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.450-453
• /
• 2005

A forest fire occurs mainly as natural factor such as wind, temperature or human factor such as light. Recently, the most of forest fire prevention is prediction or prevision against forest fire by using remote sensing technology. However in order to forest fire prevention, the remote sensing has many limitations such as high cost and advanced technologies and so on. Therefore, we need to multisensor integration system that utilize not only remote sensing but also in-situ sensing in order to reduce large damage of forest fire though analysis of happen cause and prediction routing of occurred forest fire. In this paper we propose a multisensor integration system that offers prediction information of factors and route of forest fire by integrates collected data from remote sensor and in-situ sensor for forest fire prevention. The proposed system is based on wireless sensor network for collect observed data from various sensors. The proposed system not only offers great quality information because firstly, raw data level fuse different format of collected data from remote and in-situ sensor but also accomplish information level fusion based on result of first stage. Offered information from our system can help early prevention of factor and early prevision against occurred forest fire which transfer to SMS service or alert service into monitoring interface of administrator.

• 대한원격탐사학회지
• /
• 제11권1호
• /
• pp.65-80
• /
• 1995

기상관측자료와 더불어 원격탐사자료를 이용함으로서 서로 다른 공간 및 시간스케일에 대한 에너지수직의 3성분을 추정할 수 있으며 결과적으로는 잠열의 추정을 가능하게 하였다. 이 러한 접근법을 응용하여 본 연구에서는 기상 및 위성자료를 바탕으로 지표에너지 관계식을 이용 한 광역증발산량 추정하는 방법에 대하여 검토하였다. 또한 토지이용의 변화에 따른 지표면열수 지의 변화를 평가하기 위하여 지리정보시스템분석 방법을 사용하여 검토하였다. 그 결과 연구지 역의 토지이용변화는 지역내의 열수지에 상당한 변화를 가져오는 것으로 나타났다. 본 연구의 결 과를 향상시키기 위해서는 열수지의 계산에 사용되는 각 추정식의 정확도 향상과 지표면의 상태 를 위성 원격탐사로서 정확하게 파악할 필요가 있다.

• 센서학회지
• /
• 제26권1호
• /
• pp.60-65
• /
• 2017

This paper describes the low noise and low power IC using the opamp sharing technique for the capacitive micro-sensor sensing platform. The proposed IC reduces noise using correlated double sampling (CDS) and reduces power consumption using the opamp sharing technique. The IC is designed to be fully programmable, and can be digitally controlled by serial peripheral interface (SPI). The power consumption and the integrated input referred noise are 1.02 mW from a 3.3 V supply voltage and $0.164aF_{RMS}$ with a bandwidth of 400 Hz. The capacitive sensitivity, the input-output linearity and the figure of merits (FoM) are 2.5 mV/fF, 2.46 %FSO, and 8.4, respectively.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.237-242
• /
• 1999

As one of the key parameters to determine $CO_2$ flux between air - sea interface, it is quite important to know p$CO_2$, which has involved much uncertainty, mainly due to the complex variations of sea surface p$CO_2$ and the paucity of samples, made in ocean. In order to improve the interrelationship between partial pressure (p$CO_2$) and different physical and biochemical parameters in global sea surface water, a new empirical relation is established to correlate and parameterize p$CO_2$ in the mixed layer using the data from recent WOCE cruises. Meanwhile, by new empirical relation, abundant historical hydrographic and nutrients ship data, Levitus data set and NOAA/AVHRR(SST), p$CO_2$ have been accumulated and applied. Then effort has to be made fur promotion of this study to correlate and parameterize p$CO_2$ in the mixed Layer with different physical and biochemical parameters. and further attribute this huge historical data sets and NOAA/AVHRR(SST) data to estimate p$CO_2$. In this paper we analyzed more interrelationship between the model and ship/satellite data set. Finally, the inter-annual variations of p$CO_2$ in sea are presented and discussed.

• Structural Monitoring and Maintenance
• /
• 제4권4호
• /
• pp.301-329
• /
• 2017

Impedance-based damage detection method has been known as an innovative tool with various successful implementations for structural health monitoring of civil structures. To monitor the local critical area of a structure, the impedance-based method utilizes the high-frequency impedance responses sensed by piezoelectric sensors as the local dynamic features. In this paper, current advances and future challenges of the impedance-based structural health monitoring are presented. Firstly, theoretical background of the impedance-based method is outlined. Next, an overview is given to recent advances in the wireless impedance sensor nodes, the interfacial impedance sensing devices, and the temperature-effect compensation algorithms. Various research works on these topics are reviewed to share up-to-date information on research activities and implementations of the impedance-based technique. Finally, future research challenges of the technique are discussed including the applicability of wireless sensing technology, the predetermination of effective frequency bands, the sensing region of impedance responses, the robust compensation of noise and temperature effects, the quantification of damage severity, and long-term durability of sensors.

• 한국의류산업학회지
• /
• 제18권6호
• /
• pp.733-745
• /
• 2016

This paper provides a review of wearable textile strain sensors that can measure the deformation of the body surface according to the movements of the wearer. In previous studies, the requirements of textile strain sensors, materials and fabrication methods, as well as the principle of the strain sensing according to sensor structures were understood; furthermore, the factors that affect the sensing performance were critically reviewed and application studies were examined. Textile strain sensors should be able to show piezoresistive effects with consistent resistance-extension in response to the extensional deformations that are repeated when they are worn. Textile strain sensors with piezoresistivity are typically made using conductive yarn knit structures or carbon-based fillers or conducting polymer filler composite materials. For the accuracy and reliability of textile strain sensors, fabrication technologies that would minimize deformation hysteresis should be developed and processes to complement and analyze sensing results based on accurate understanding of the sensors' resistance-strain behavior are necessary. Since light-weighted, flexible, and highly elastic textile strain sensors can be worn by users without any inconvenience so that to enable the users to continuously collect data related to body movements, textile strain sensors are expected to become the core of human interface technologies with a wide range of applications in diverse areas.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1998년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.361-369
• /
• 1998

Recently, the improvement of on-board satellite sensors covering hyperspectral image sensors, high spatial resolution sensors provide data on earth in diverse aspect. The application field relating remotely sensed data also varies depending on what type of job one wants. The various resolution of sensors from low to extremely high is also available on the market with a user defined specific location. The expense to purchase remote sensed data is going down compare to the cost it need past few years ago in terms of research or private use. Now, the satellite remote sensed data is used on the field of forecasting, forestry, agriculture, urban reconstruction, geology, or other research field in order to extract meaningful information by applying special techniques of image processing. There are many image processing packages available worldwide and one common aspect is that they are expensive. There need to be a advanced satellite data processing package for people who can not afford commercial packages to apply special remote sensing techniques on their data and produce valued-added product. The study was carried out with the purpose of developing a special satellite data processing package which covers almost every satellite produced data with normal image processing functions and also special functions needed on specific research field with friendly graphical user interface (GUI). And for the people with any background of remote sensing with windows platform.