• 한국강구조학회 논문집
• /
• 제11권4호통권41호
• /
• pp.425-433
• /
• 1999

일반적으로 철골조의 구조해석과 설계시 접합부는 완전한 강절점과 활절점으로 가정되나 실제의 접합부는 반강접의 거동을 보인다. 본 논문에서 접합부의 연성도를 고려한 비선형 거동과 부재의 기하 비선형을 고려할 수 있는 구조해석 프로그램을 개발하였다. 6층 비가새 철골구조물에 대한 효율적인 반강접 접합부를 제안하였으며 반강접 접합부의 구조물 거동에 미치는 영향을 파악하였다.

• 한국강구조학회 논문집
• /
• 제22권4호
• /
• pp.313-324
• /
• 2010

본 연구에서는 반강접 접합부 배치에 따른 구조물 거동특성을 파악하기 위하여 KBC2005 건축구조설계기준으로 비가새 5층 철골 구조물을 설계하여 모든 접합부를 완전 강접합부와 반강접 접합부로 이상화한 경우 그리고 반강접 접합부를 수직배치 및 수평배치한 경우에 대하여 비탄성 시간이력 구조해석을 실시하였다. 철골 보 및 기둥의 모멘트-곡률 관계는 화이버모델을 이용하여 확인하였으며 반강접 접합부의 모멘트-회전각 관계는 3-매개변수 파워모델 그리고 철골 보, 기둥 및 접합부의 이력거동은 3-매개변수 모델을 이용하여 나타내었다. 4개 지진파에 대한 재현주기 2400년 위험수준에 해당하는 최대지반가속도와 5% 층간변위에 대한 푸쉬오버 구조해석의 최대밑면전단력 발생 최대지반가속도에 대하여 시간이력 구조해석을 실시하여 밑면전단력, 지붕층 변위, 층간변위, 접합부 요구연성도, 기둥, 보 및 접합부의 최대휨모멘트 그리고 소성힌지 분포 등을 확인하였다. 반강접 접합부를 수직적으로 외부에 배치할수록 최대밑면전단력과 층간변위는 감소하며, 수평적으로 상부층에 배치할수록 접합부 요구연성도가 감소하였다. 푸쉬오버 구조해석과 시간이력 구조해석에서 최대층간변위 발생 위치가 다르고 크기는 푸쉬오버 구조해석에서 과대평가되었다. 밑면전단력, 층간변위 및 접합부 요구연성도를 위한 가장 바람직한 반강접 접합부 배치는 수직적으로 외부에 배치하는 것이다.

• Steel and Composite Structures
• /
• 제4권5호
• /
• pp.403-418
• /
• 2004

Lateral sway is most likely to control the design of semi-rigid steel frames where the frame arrangements do not include any form of bracing. This paper investigates the sway behaviour of semi-rigid regular steel frames i.e., frames having the same arrangement of beam and column sections at all levels, and hence proposes some design charts for the prediction of sway that eliminate the need for doing any numerical modelling. Schueller's equation has also been modified to incorporate connection flexibility in addition to its original rigid frame considerations. All the proposed methods have been validated using results obtained from numerical analysis.

• Steel and Composite Structures
• /
• 제7권2호
• /
• pp.119-133
• /
• 2007

Based on stability theory of current rigid steel frames and using the three-column subassemblage model, the governing equations for determining the effective length factor (${\mu}$-factor) of the columns in semirigid composite frames are derived. The effects of the nonlinear moment-rotation characteristics of beam-to-column connections and composite action of slab are considered. Furthermore, using a two-bay three-storey composite frame with semi-rigid connections as an example, the effects of the non-linear moment-rotation characteristics of connections and load value on the ${\mu}$-factor are numerically studied and the ${\mu}$-factors obtained by the proposed method and Baraket-Chen's method are compared with those obtained by the exact finite element method. It was found that the proposed method has good accuracy and can be used in stability analysis of semi-rigid composite frames.

• 한국공간구조학회논문집
• /
• 제3권1호
• /
• pp.35-46
• /
• 2003

Conventional analysis and design of steel structures are performed using the assumption of a either fully rigid or pinned. However, every steel connection lies in between fully rigid and pinned connection. So, It is important to consider the connection for steel structure design. In this paper Computer-based second-order elastic analysis is used to calculate one story two bay and two story three bay for steel structures with semi-rigid connection. Genetic Algorithms(GAs) and Sequential Unconstrained Minized Technique(SUMT) dynamic programming is used to the method for optimum design of steel structures. The efficiency and validity of the developed continuous and discrete optimum design algorithm was verified by applying the algorithm to optimum design examples.

• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1121-1144
• /
• 2016

This paper presents a displacement-based finite element procedure for second-order distributed plasticity analysis of planar steel frames with semi-rigid beam-to-column connections under static loadings. A partially strain-hardening elastic-plastic beam-column element, which directly takes into account geometric nonlinearity, gradual yielding of material, and flexibility of semi-rigid connections, is proposed. The second-order effects and distributed plasticity are considered by dividing the member into several sub-elements and meshing the cross-section into several fibers. A new nonlinear solution procedure based on the combination of the Newton-Raphson equilibrium iterative algorithm and the constant work method for adjusting the incremental load factor is proposed for solving nonlinear equilibrium equations. The nonlinear inelastic behavior predicted by the proposed program compares well with previous studies. Coupling effects of three primary sources of nonlinearity, geometric imperfections, and residual stress are investigated and discussed in this paper.

• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.1-21
• /
• 2022

In the structural analysis of steel frames, joints are generally considered as rigid or hinged considering their moment transfer ability. However, the first studies conducted with the beginning of the 20th century showed that the joints do not actually fit these two definitions. In reality, a joint behaves between these two extreme points and is called semi-rigid. Including the actual state of the joint in the structural analysis provides significant economic advantages, so the subject is an intense field of study today. However, it does not find enough application area in practice. For this reason, a large-scale literature published from the first studies on the subject to the present has been examined within the scope of the study. Three important points have been identified in order to examine a joint realistically; modelling the load-displacement relationship, performing the structural analysis and how to design. Joint modelling methods were grouped under 7 main headings as analytical, empirical, mechanical, numerical, informational, hybrid and experimental. In addition to the moment-rotation, other important external load effects like axial force, shear and torsion were considered. Various evaluations were made to expand the practical application area of semi-rigid connections by examining analysis methods and design approaches. Dynamic behaviour was also included in the study, and besides column-beam connections, other important connection types such as beam-beam, column-beam-cross, base connection were also examined in this paper.

• 한국강구조학회 논문집
• /
• 제12권4호통권47호
• /
• pp.339-350
• /
• 2000

본 연구의 목적은 개량 T-stub를 이용한 1층 1스팬 골조의 구조적 거동을 파악하고 중층규모의 건축물에 대하여 개량 T-stub의 적용가능성을 확인하기 위한 것이다. 연구방법으로 개량 T-stub 및 기존 T-stub를 이용한 반강접 골조의 반복가력실험을 하였으며 개량 T-stub의 플랜지 두께와 볼트중심거리를 변수로 하여 유한요소해석을 수행하여 그 결과를 실험결과와 비교하였다. 본 연구의 실험 및 해석결과로부터 개량 T-stub의 거동을 정성적으로 파악하고 반강접합부로서의 적용가능성을 확인하였다.

• Steel and Composite Structures
• /
• 제8권4호
• /
• pp.265-280
• /
• 2008

An investigation on the combined effect of foundation type, foundation flexibility, axial load and PR (semi-rigid) connections on the natural frequencies of steel frames is presented. These effects were investigated using a suitable modified FE program for cases where the foundation flexibility, foundation connectivity, and semi-rigid connections could be treated as equivalent linear springs. The effect of axial load on the natural frequency of a structure was found to be significant for slender structures subjected to high axial loads. In general, if columns of medium slenderness are designed without consideration of axial load effects, the frequency of the structure will be overestimated. Studies on the 3-story Los Angeles PR SAC frame indicate that the assumption of rigid connections at beam-column and column-base interfaces, as well as the assumption of a rigid foundation, can lead to significant errors if simplified design procedures are used. These errors in an equivalent static analysis are expected to lead to even more serious problems when considering the effect of higher modes under a non-linear dynamic analysis.

• 한국항해항만학회지
• /
• 제29권5호
• /
• pp.389-394
• /
• 2005

초대형 부유식 구조물의 경우 지진하중보다 파랑하중에 의한 영향이 크게 작용하기 때문에 파랑하중에 의한 하부부체의 변형이 상부구조물에 부가모멘트를 발생시키는 요인이 된다. 이러한 부가모멘트를 저감시키기 위해 본 연구에서는 강접합과 핀접합 사이의 거동을 하는 반강접 접합부를 적용하였다. 초대형 부유식 구조물의 상부구조체에 반강접 접합부를 적용할 경우 보의 부가모멘트를 감소시킬 수 있으며, 더욱 경제적인 설계가 가능하다. 본 논문에서는 4경간 3층 예제구조물에 대하여 파랑하중에 의한 영향을 분석하고, 구조물의 반강접 접합부 적용에 따른 효율성을 검토하였다. 접합부는 각형강관 외-다이아프램 접합부를 적용하였으며 파랑하중에 의한 동적 특성을 분석하기 위하여 시간 이력해석을 수행하였다. 초대형 부유식 구조물의 상부구조물의 경우 파랑하중에 의해서 정하중의 최대모멘트 응답이 강접 구조물에서는 $33\%$ 증가하였으며, 스프링 모델을 이용한 반강접 구조물에서는 $26\%$ 증가하였다.