• 분석과학
• /
• 제34권2호
• /
• pp.56-67
• /
• 2021

Due to the difficulty of grading visualized fingerprints with previously known evaluation methods for the comparison of split fingerprints, a preliminary study was performed with the densitometric image analysis (DIA) method as a potential quantitative and supplementary evaluation method. Each image of inked split fingerprints was divided into 4 zones for analysis. Weekly intra- and inter- analysis by two analysts with three whole fingerprints that were constructed by combining inked split fingerprints showed that the average area values and the ranges of difference fluctuation were not significantly different between strong fingerprints and strong-weak pairs, while they were different in weak fingerprints and weak-weak pairs. In the case of weak fingerprints, the exact acquisition of ridges was difficult and this seemed to influence the results. An additional study is needed for the improved reliability using DIA method with weak fingerprints such as 8 zones division rather than 4 zones. In addition, the analysis results performed by several analysts at different times should be used to improve the reliability of the analysis method further. Based on the above result, it can be judged that utilizing the DIA method as a secondary evaluation method of the existing scoring system would be effective with the additional studies especially on weak fingerprints.

• 분석과학
• /
• 제33권4호
• /
• pp.197-207
• /
• 2020

The current comparison methods with scoring systems that are used to compare visualized latent fingerprints (LF) have disadvantages. Evaluators using these methods are prone to make errors and fail to discriminate LFs correctly to notice the differences among those LFs. Therefore, a comparative and quantitative evaluation method that is capable of obtaining more objective and quantitative results is needed. Densitometric image analysis (DIA) is used in other fields as a reliable semi-quantitative comparison method. To apply DIA to LFs, the potential variables that can occur during the DIA process were tested. The visualized ridges of LFs can be compared using the concentration of dots against the background to make it possible to analyze the ridges with DIA. The variables that can be present during the DIA process include the thickness of the analysis line, the number of ridges to be taken, the number of divided zones within each of the fingerprints, and the angles of the analysis line against the ridge lines that were selected. From the analysis of the inked fingerprints and circular lines that are similar to fingerprints, the angle of the analysis lines with the ridge line was the most significant variable. The preliminary test result was applied to the comparison of LFs that were developed with the powder method and then compared with the AFIS analysis. A similar trend was found, and a more detailed and semi-quantitative comparison of the visualized LFs was possible. In the future, it is necessary to check the evaluative ability of the DIA method by analyzing the visualized LFs with other various development methods. However, DIA is currently an option that can be used as an objective comparative evaluation method during fingerprint studies with supplementary role.

• 한국안전학회지
• /
• 제17권4호
• /
• pp.110-118
• /
• 2002

During the last ten years, the need has been increase for reducing maintenance cost for aged equipments are ensuring safety, efficiency and profitability of petrochemical and refinery plants. American Petroleum institute(API) developed a code, API 581 for proposing standard procedures of risk based inspection. Even though the API 581 code covers general RBI procedures, there must be some limitations. In this study, a semi-quantitative assessment algorithm for RBI based on the API 581 code was reconstructed for developing an RBI software. The user-friendly realRBI software is developed with a module for evaluation semi-quantitative risk category using the potential consequence factor and the likelihood factor. Also, inspection planning module for inspection time and inspection method for equipments are included.

• 대한안전경영과학회지
• /
• 제8권6호
• /
• pp.13-27
• /
• 2006

The goal of this study is to propose the effective way of finding injurious factors and making improved plan that prevents the workers against musculoskeletal disorders at a semi-finished medical product fabricating company A questionnaire and an ergonomic assessment method were adopted to analyze the symptoms of workers' musculoskeletal disorders, and an analysis of working postures and a quantitative assessment on various processes were performed to find out harmful factors of workplace. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. It can be concluded that the method and process described in this paper could be helpful for diagnosing the musculoskeletal disorders and making improvement plans to the company with similar working conditions and process.

• 한국농공학회논문집
• /
• 제65권1호
• /
• pp.61-72
• /
• 2023

The increase in the rearing intensity of pigs has caused deterioration in the pig house's internal environment such as temperature, humidity, ammonia gas, and so on. Traditionally, the widely used method to control the internal environment was through the manipulation of the ventilation system. However, the conventional ventilation system had a limitation to control the internal environment, prevent livestock disease, save energy, and reduce odor emission. To overcome this problem, the air-recirculated ventilation system was suggested. This system has a semi-closed loop ventilation type. For designing this system, it was essential to evaluate the ventilation rates considering the pressure loss of ducts. Therefore, in this study, pressure loss calculation and experiment were conducted for the quantitative ventilation design of a semi-closed loop system. The results of the experiment showed that the inlet through which external air flows should always be opened. In addition, it was also found that for the optimum design of the semi-closed loop ventilation system, it was appropriate to install a damper or a backflow prevention device rather than a ventilation fan.

• 대한임상검사과학회지
• /
• 제51권2호
• /
• pp.164-170
• /
• 2019

5종류의 수송배지를 흡수 및 배출 능력, 생존 효율, 회수율을 CLSI (Clinical and Laboratory Standards Institute) M40-A2의 Swab elution method (Quantitative) 기준으로 평가하였다. 액체배지가 반유동 배지보다 3가지 평가에서 대부분 우수한 결과값을 보여주었다. Flocked swab이 standard swab 형태보다 균의 흡수 및 배출의 능력 또한 우수하였다. 생존 효율에 대한 평가 결과는 액체배지(S4)가 가장 우수한 결과값을 보였다. 성장이 좋지 않은 S. pneumoniae는 액체배지(S4, S5)에서 생존효율과 회수율이 높았다. 균 회수율 평가 결과는 S. pyogenes는 모든 배지에서 CLSI 기준에 적합하였다. S. pneumoniae는 반유동 배지(S2, S3)에서 부적합하였고, 나머지 배지는 모두 기준에 적합하였다. H. influenzae는 반유동 배지(S1, S3)에서 부적합하였고, 반유동 배지(S2), 액체배지(S4, S5)에서 기준에 적합하였다. 호흡기 질환을 유발하는 S. pneumonia, H. influenzae의 생존 능력은 대부분의 배지에서 좋지 않았다. P. aeruginosa는 실온에서 과성장이 관찰되었다. 액체배지와 flocked swab의 조합이 3가지 평가 방법에서 가장 뛰어난 결과를 평가를 통해 확인하였다.

• 대한인간공학회지
• /
• 제30권6호
• /
• pp.765-773
• /
• 2011

Objective: This study aims towards exploring a model of the HCI evaluation methods to improve the usability of mobile device, based on a case of a Mobile PDA system in a Museum context. Background: Mobile PDA systems in a Museum context is widely utilized for the educational purposes, but it is criticized for low usability that the device only play a role in textbooks on legs without any interactive educational activities. Therefore, the usability improvements on the mobile PDA system should be considered. Method 1: This model was developed with a combination of the expert review and the user testing, and with a combination of the qualitative and quantitative studies. In more details, first of all, a qualitative study was conducted as a combination of three different methods: 1) expert review with heuristics, 2) interviews with persons working in a museum, and 3) contextual enquiry. Results 1: The experts review provided with critical usability issues, and the semi-constructive interview helped to understand the background of the mobile device. Lastly, the contextual enquiry showed user experience problems and directions of improving the device from user's perspective. Method 2: Based on the results of the qualitative study, a questionnaire was designed. Results 2: The analysis of the quantitative study was conducted to generalize the problems, and prioritize the direction of improving the device within the limitation of the cost and time in a museum. Conclusion: This study has implications in developing an example of a HCI evaluation model to improve the user experience of the mobile device as well as finding problems and directions of how to improve the mobile PDA systems in the museum. Application: In fact, most of the studies related to the evaluation of the mobile device have been conducted in a laboratory context due to the cost and time. This paper, however, attempted to apply to various HCI research techniques from different constituents in real context.

• 한국해양학회지:바다
• /
• 제29권2호
• /
• pp.116-138
• /
• 2024

본 연구는 '해양교란유해종'이 해양 환경과 사회경제적 측면에 미치는 영향을 평가하기 위한 새로운 도구와 프로토콜을 제시한다. 한국의 해양생태계 보전 및 관리법에서 발견된 한계점을 보완하기 위해, 본 연구는 해양 환경과 사회경제 그룹(영역)으로 나누어진 영향 평가 프레임워크를 도입하였다. 각 그룹은 6개의 영향 평가 카테고리(범주)로 구성되어 있으며, 준정량적인 5단계 척도를 사용하여 생태계의 교란에서 건강과 재산에 대한 영향에 이르는 폭넓은 이슈들을 다루는 유연한 방식을 제공한다. 이 영향평가 도구의 실행은 델파이 방법을 기반으로 한 체계적인 5단계 프로세스를 통해 진행된다. 이 접근법은 다양한 전문가와 이해관계자 간의 협력을 촉진하며, 다양한 관점을 통합하는 포괄적인 평가를 가능하게 한다. 또한 이 연구는 불확실성을 효과적으로 관리하고 결과의 일관성을 향상시키는 전략도 모색되었다. 본 평가 프로토콜의 적용은 '해양교란유해종'에 의한 생태학적 피해의 정도를 계량화하고 관리 대상 및 예방 조치의 우선순위를 정립하는 데 결정적인 역할을 할 것으로 기대된다. 평가 과정의 궁극적인 목표는 의사결정자가 해양생태계 보전과 사회경제적 영향을 완화하기 위한 전략을 수립하도록 지원하는 것이다.

• 분석과학
• /
• 제28권2호
• /
• pp.79-85
• /
• 2015

TLC (SiO₂) 상에서 3가지 유사 암페타민 류 아민 화합물과 3가지 유도체화 시약 사이의 반응으로부터 얻어진 아민유도체의 이미지 분석으로부터 암페타민 류 화합물에 대한 신속하고 경제적인 반정량적인 분석방법을 제시하기 위하여 선행 실험을 하였다. TLC상 직접적인(in situ, co-spot) 유도체화 반응의 적정화를 시도하였고 그 TLC 결과물들을 디지털카메라로 촬영하여 이미지를 얻은 후 2가지의 이미지 분석 프로그램(CP Atlas 2.0 및 ImageJ)에 적용하여 재현성(RSD; %)과 상관성(R²)을 각각 확인 및 비교하였다. 그 결과, 반응 조건에 대한 조정이 필요하였고(반응 온도 등) 각 시료별 2가지의 농도(0.5 mg/mL 및 0.01 mg/mL)에서 반응의 재현성은 0.69~5.50% 범위이었으며 반응(2 µL per spot)의 생성물과 아민의 농도에 대한 상관성은 0.1~0.005 mg/mL의 농도 구간에서 가장 높게 나타났다(R²> 0.9906). 또한, 두 가지 프로그램 모두 재현성과 직선성에 대한 유사한 결과를 나타내어 직접적인 유도체화 반응과 TLC 이미지에 대한 이들 프로그램을 사용한 분석이 아민 화합물에 대한 반정량적인 분석으로 사용될 수 있는 가능성을 보였다.

• 한국전산구조공학회논문집
• /
• 제21권5호
• /
• pp.465-474
• /
• 2008

실시간 하이브리드 실험법(real-time hybrid testing method)은 구조물의 수치해석부와 실험부 부분구조를 운동방정식으로 통합하여 실시 간으로 동시에 계산과 실험을 수행하는 방법이다 본 연구는 실시간 하이브리드 실험법을 사용하여 수동 및 준능동 MR감쇠기가 설치된 건축구조물의 내진성능을 정량적으로 평가한다. 건물 모델은 실물 크기 5층 건물을 강제진동실험 결과를 통해 식별한 수치모델로 사용하였고, MR감쇠기는 실험적 부분구조르 UTM에 설치되었다. 본 연구에서 수행되는 실시간 하이브리드 실험은 사인파 및 지진파 가진을 통하여 얻은 결과와 전류에 따른 MR감쇠기의 제어력을 이용하여 얻은 Bouc-Wen모델을 사용하여 얻은 해석모델과 일치함으로 그 유효성을 입증하였다. 또한 예비연구로써 구조물의 응답을 최적으로 제어하기 위한 clipped-optimal 제어알고리즘과 modulated homogeneous friction 준능동 제어알고리즘을 MR감쇠기에 적용하였다. 각 전류별 Bouc-Wen모델을 곡선맞춤하여 각각의 Bouc-Wen모델 파라미터를 식별하였으며 그 결과를 준능동 제어알고리즘 수치해석에 적용하였다. 또한 실시간 하이브리드 실험법을 이용한 준능동 제어 실험결과와 해석결과를 비교하여 준능동 제어알고리즘의 성능을 평가함에 있어 실시간 하이브리드 실험이 합리적임을 보여준다.