• Elastomers and Composites
• /
• v.35 no.3
• /
• pp.173-179
• /
• 2000

Cure characteristics. tensile properties, and dynamic properties were investigated on the carbon black-filled natural rubber compounds, in which three typical vulcanization types conventional vulcanization(Conv), semi-efficient(Semi-EV), and efficient(EV) vulcanizations were used. The effects of vulcanization temperature on both the mechanical property and aging resistance of rubber compounds were also investigated. The Conv cure system showed a slightly slower rate of vulcanization than those of Semi-EV and EV ones. On the other hand, it showed a higher value in the maximum torque of cure curve. Higher tensile moduli were observed in Conv system than those in Semi-EV and EV ones, while lower elongation at break were obtained in Conv one. The tensile strength at break were found to be about the same for three cute systems. Hardness, modulus, and tensile strength decreased with increasing the vulcanization temperature, and the degree of changes in the properties was found to be smaller for EV and Semi-EV systems than that in Conv one. The EV system was found to be superior in thermal-aging resistance to Conv one.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.628-634
• /
• 2000

Crosslink is the most important chemistry in a rubber vulcanizate. Degree and type of crosslinks of the vulcanizate determine its physical properties. Change of crosslink density and deformation of a rubber vulcanizate by thermal aging were studied using natural rubber (NR) vulcanizates with various cure systems (conventional, semi-EV, and EV) and different cure times (under-, optimum-, and overture). All the NR vulcanizates were deformed by the thermal aging at 60-100 $^{\circ}C.$ The higher the aging temperature is, the more degree of the deformation is. The undercured NR vulcanizates after the thermal aging were deformed more than the optimumand overcured ones. The NR vulcanizates with the EV cure system were less deformed than those with the conventional and semi-EV cure systems. The deformation of the NR vulcanizates was found to be due to change of the crosslink density of the vulcanizates. The crosslink densities of all the vulcanizates after the extraction of organic materials were also changed by the thermal ging. The sources to change the crosslink densities of the vulcanizates by the thermal aging were found to be dissociation of the existing sulfur crosslink and the formation of new crosslinks by free sulfur, reaction products of curing agents, and pendent sulfide groups.

• Macromolecular Research
• /
• v.16 no.6
• /
• pp.561-566
• /
• 2008

NR composites with different curing systems were aged thermally at 60, 70, 80, and $90^{\circ}C$ for 2-185 days in a convection oven, and the changes in the crosslink density were investigated as a function of the accelerated thermal aging. The overall crosslink densities increased with increasing aging time irrespective of the aging temperatures and curing systems. The changes in crosslink density were enhanced by increasing the aging temperature. The degree of the increased crosslink density was in the following order: "the conventional cure system > the semi-EV system > the EV system". For short term thermal aging, the change in crosslink density with the aging time was complicated, particularly for low temperature aging. The activation energies of the change in crosslink density with thermal aging using the conventional and semi-EV cure systems increased and then remained relatively constant with increasing aging time, whereas that of the specimen with an EV cure system tended to increase linearly. The experimental results were explained by the dissociation of the existing polysulfidic linkages and the formation of new cross links through the crosslinking-related chemicals remaining in the sample.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.63-70
• /
• 2001

The objective of this study was to investigate the effect of cure type on the processing and physical properties under conditions of similar stress-strain properties. On the carbon black filled natural rubber(NR) based compound, the induction time decreased, but the cure rate became fast with increasing loading of sulfur donor agent. Tensile strength was little affected on the curing type. However, elongation generally decreased with increasing accelerator. Effect of cure type on the blow-out properties was followings: CV

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.213-216
• /
• 1992

Semiinsulating GaAs crystals employing LPLEC technique should be grown from the Ga-rich melt due to a very low incorporation of unintentional impurities such as carbon (<$10^{15}cm^{-3}$). High resisitivity of this material can be derived from the balanced compensation among not only EL2 deep donors and carbon acceptors but also H1 double charge native acceptors(Ev + 77meV, Ev + 200 meV) and H2 native acceptors(Ev + 68 meV). Considering of the complicated compensation mechanism using statistical calculation of the electron occupancy of each level, SI GaAs crystal with low impurity contents(<$10^{15}cm^{-3}$) can be successfully obtained by maintaining the melt composition around 0.45 As mole fraction.

• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.246-255
• /
• 2023

In this study, we investigated for natural rubber foam to replace petrochemical-based neoprene foam. Experiments were conducted on vulcanization system and 2-step foaming process of natural rubber. The vulcanization system were EV(Efficient Vulcanization Cure), Semi-EV(Semi-Efficient Vulcanization Cure) and CV(Conventional Vulcanization Cure). In the 2-step foaming process, first molding temperature was 140℃, times were 15, 20, 25, and 30minutes, and the second molding temperature was 160℃, the times 5, 10, 15, and 20minutes. The cure and viscosity characterization were evaluated by oscillating disc rheometer (ODR) and mooney viscosmeter. Various mechanical characteristics, including hardness, tensile strength, elongation at the point of rupture, and tear strength, were quantified. Subsequently, an assessment of alterations in these mechanical attributes was conducted post-immersion in a NaCl solution. In addition degree of volume change was measured after immersing the NR foam in NaCl solution and the low-temperature permanent compression set was evaluated at 4℃. And expansion ratio and shrinkage ratio of NR foam were evaluated for 28 days. As a result the EV vulcanization system showed the least change in physical properties before and after salt water immersion, and the lowest shrinkage ratio for 28 days. In addition it was confirmed that the 2-step foaming optimum condition differed depending on the appropriate vulcanization condition.

• Elastomers and Composites
• /
• v.56 no.1
• /
• pp.32-42
• /
• 2021

The vulcanizate structure of silica-filled compounds is affected by the filler-rubber interaction (FRI) due to the silica-rubber coupling reaction and the chemical crosslink density (CCD) of the matrix rubber. In this study, the vulcanizate structure changes of silica-filled compounds according to the silane and sulfur variation were quantitatively analyzed using the Flory-Rehner and Kraus equations. In efficiency vulcanization (EV) conditions with low sulfur content, FRI increased when the bis-[3-(triethoxysilyl)propyl]tetrasulfide (TESPT) content increased, and the CCD clearly decreased. By contrast, in semi-EV conditions with high sulfur content, as TESPT content increased, the FRI increased the same way EV conditions, but the CCD was unchanged. Based on these results, it was confirmed that FRI of the silica-filled compounds increased as TESPT content increased, but CCD decreased or retained similar values according to the vulcanization system, indicating that the formation reaction of FRI was preferred over CCD.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.174-178
• /
• 1998

Blowout of NR and SBR vulcanizates was studied using a microwave oven. Rubber vulcanizates with different contents of carbon black (0, 30, 50, 70 phr) and various cure systems (conventional, semi-EV, and EV) were prepared. Unfilled rubber vulcanizates did not exploded by irradiation of microwave, while carbon black-filled ones exploded within 10 min. A blowout time of the carbon black-filled rubber vulcanizate decreases with an increase of the content of carbon black in the vulcanizate. A blowout temperature of the organic additive-extracted vulcanizate is higher than that of the not-extracted one, but the extracted vulcanizate blows out faster than the not-extracted one. A blowout temperature of the overcured vulcanizate is higher than that of the undercured one with the same cure system. Temperatures of unfilled SBR vulcanizates heated by the microwave irradiation are lower than those of unfilled NR ones. The carbon black-filled SBR vulcanizates blow out at higher temperatures than the carbon black-filled NR ones. Blowout times of the carbon black-filled SBR vulcanizates are longer than those of the carbon black-filled NR ones.

• Applied Chemistry for Engineering
• /
• v.2 no.4
• /
• pp.356-362
• /
• 1991

The physico-mechanical properties of NR/BR blend were measured, and the results were interpreted in terms of the crosslink density with cure system. The cure rate, maximum torque and crosslink density increase with the content and ratio of curative for cure system. Hardness, 300 % tensile modulus, rebound and wear resistance increase with crosslink density of the vulcanizate but heat build-up and tan $\delta$ at $60^{\circ}C$ decrease. It is expected that semi-EV(efficient vulcanization) cure system is appropriate for application in tire tread of truck/bus in which load bearing property is impotant.

• Pediatric Infection and Vaccine
• /
• v.23 no.1
• /
• pp.46-53
• /
• 2016

Purpose: Enterovirus (EV) infection in children can manifest various diseases from asymptomatic infection to nonspecific febrile illness, hand-foot-mouth disease, and aseptic meningitis. This study was aimed to investigate epidemiology and clinical significance of various genotypes of EV infections in pediatric inpatient. Methods: We collected the stool samples from the admitted pediatric patients in Inha University Hospital from March 2014 to March 2015. EV detection and genotype identification were performed by real-time RT-PCR and semi-nested RT-PCR. Phylogenetic trees were constructed by neighbor joining method. Results: A total of 400 samples were collected during study period and 112 patients (28%) were diagnosed with EV infections. The mean age of EV positive patients was 2.66 years (0.1-14) and sex ratio was 1.73:1. Genetic sequences of EVs were identified; coxsackievirus B5 (17, 15.2%), coxsackievirus A16 (13, 11.6%), enterovirus 71 (10, 8.9%), and coxsackievirus A2 (9, 8.0%). Nonspecific febrile illness (96, 86%) was the most common clinical manifestation and the duration of fever was 0-11 days (mean 3.1 days). Rash (44, 39%) and meningitis (43, 38%) were followed. Patients who were attending daycare center or had siblings accounted for 82.1%. Phylogenetic relationship tree revealed 6 distinct genogroups among 56 types of EVs. Conclusions: This study is the report of epidemiology, serotype distribution and clinical manifestations of children with EV infection in Incheon. This data will be helpful for further study about the epidemiology of EV infection in Korea.