• 한국지진공학회논문집
• /
• 제27권5호
• /
• pp.203-211
• /
• 2023

For fast-built and safe precast concrete (PC) construction, the dry mechanical splicing method is a critical technique that enables a self-sustaining system (SSS) during construction with no temporary support and minimizes onsite jobs. However, due to limited experimental evidence, traditional wet splicing methods are still dominantly adopted in the domestic precast industry. For PC beam-column connections, the current design code requires achieving emulative connection performances and corresponding structural integrity to be comparable with typical reinforced concrete (RC) systems with monolithic connections. To this end, this study conducted the standard material tests on mechanical splices to check their satisfactory performance as the Type 2 mechanical splice specified in the ACI 318 code. Two PC beam-column connection specimens with dry mechanical splices and an RC control specimen as the special moment frame were subsequently fabricated and tested under lateral reversed cyclic loadings. Test results showed that the seismic performances of all the PC specimens were fully comparable to the RC specimen in terms of strength, stiffness, energy dissipation, drift capacity, and failure mode, and their hysteresis responses showed a mitigated pinching effect compared to the control RC specimen. The seismic performances of the PC and RC specimens were evaluated quantitatively based on the ACI 374 report, and it appeared that all the test specimens fully satisfied the seismic performance criteria as a code-compliant special moment frame system.

• BMB Reports
• /
• 제54권7호
• /
• pp.335-343
• /
• 2021

Cancer stem cells (CSCs) are a subpopulation of cancer that can self-renew and differentiate into large tumor masses. Evidence accumulated to date shows that CSCs affect tumor proliferation, recurrence, and resistance to chemotherapy. Recent studies have shown that, like stem cells, CSCs maintain cells with self-renewal capacity by means of asymmetric division and promote cell proliferation by means of symmetric division. This cell division is regulated by fate determinants, such as the NUMB protein, which recently has also been confirmed as a tumor suppressor. Loss of NUMB expression leads to uncontrolled proliferation and amplification of the CSC pool, which promotes the Notch signaling pathway and reduces the expression of the p53 protein. NUMB genes are alternatively spliced to produce six functionally distinct isoforms. An interesting recent discovery is that the protein NUMB isoform produced by alternative splicing of NUMB plays an important role in promoting carcinogenesis. In this review, we summarize the known functions of NUMB and NUMB isoforms related to the proliferation and generation of CSCs.

• Journal of Microbiology and Biotechnology
• /
• 제18권1호
• /
• pp.23-27
• /
• 2008

Self-splicing group I introns in tRNA anticodon loops have been found in diverse groups of bacteria. In this work, we identified $tRNA^{fMet}$ group I introns in six strains of marine Synechococcus elongatus. Introns with sizes around 280 bp were consistently obtained in all the strains tested. In a phylogenetic analysis using the nucleotide sequence determined in this study with other cyanobacterial $tRNA^{fMet}$ and $tRNA^{Leu}$ intron sequences, the Synechococcus sequence was grouped together with the sequences from other unicellular cyanobacterial strains. Interestingly, the phylogenetic tree inferred from the intronic sequences clearly separates the different tRNA introns, suggesting that each family has its own evolutionary history.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권4호
• /
• pp.16-24
• /
• 2022

Applications of REBa₂Cu₃O_7-δ tapes require joints with a simple manufacturing process, low resistance and good mechanical properties. In the present study, we successfully developed a copper diffusion joint between Cu-stabilized REBa₂Cu₃O_7-δ tapes that meets the above requirements without solder simply by applying flux, heat and pressurization. After a 3 min thermocompression process at approximately 150 δ and 336 MPa in air, two tapes were directly connected between Cu stabilizers by copper diffusion, which was proven by microstructure analysis. The specific resistivity of the copper diffusion joint reached 5.8 nΩ·cm² (resistance of 0.4 nΩ for a 306 mm splicing length) at 77 K in the self-field. The axial tensile stress reached 200 N without critical current degradation. The results show promise for the preparation of copper diffusion joints to be used in coils, attached tapes, and wire/cable terminals.

• BMB Reports
• /
• 제56권11호
• /
• pp.612-617
• /
• 2023

Pleiotropic regulator 1 (PLRG1), a highly conserved element in the spliceosome, can form a NineTeen Complex (NTC) with Prp19, SPF27, and CDC5L. This complex plays crucial roles in both pre-mRNA splicing and DNA repair processes. Here, we provide evidence that PLRG1 has a multifaceted impact on cancer cell proliferation. Comparing its expression levels in cancer and normal cells, we observed that PLRG1 was upregulated in various tumor tissues and cell lines. Knockdown of PLRG1 resulted in tumor-specific cell death. Depletion of PLRG1 had notable effects, including mitotic arrest, microtubule instability, endoplasmic reticulum (ER) stress, and accumulation of autophagy, ultimately culminating in apoptosis. Our results also demonstrated that PLRG1 downregulation contributed to DNA damage in cancer cells, which we confirmed through experimental validation as DNA repair impairment. Interestingly, when PLRG1 was decreased in normal cells, it induced G1 arrest as a self-protective mechanism, distinguishing it from effects observed in cancer cells. These results highlight multifaceted impacts of PLRG1 in cancer and underscore its potential as a novel anti-cancer strategy by selectively targeting cancer cells.

• 한국지진공학회논문집
• /
• 제27권3호
• /
• pp.129-137
• /
• 2023

This study presents a dry precast concrete (PC) beam-column connection, and its target seismic performance level is set to be emulative to the reinforced concrete (RC) intermediate moment resisting frame system specified in ACI 318 and ASCE 7. The key features include self-sustaining ability during construction with the dry mechanical splicing method, enabling emulative connection performances and better constructability. Test specimens with code-compliant seismic details were fabricated and tested under reversed cyclic loading, which included a PC beam-column connection specimen with dry connections and an RC control specimen. The test results showed that all the specimens failed in a similar failure mode due to plastic deformations in beam members, while the hysteretic response curve of the PC specimen showed comparable and emulative performances compared to the RC specimen. Seismic performance evaluation was quantitatively addressed, and on this basis, it confirmed that the presented system can fully satisfy all the required performance for the intermediate RC moment resisting frame.

• 한국발생생물학회지:발생과생식
• /
• 제14권4호
• /
• pp.243-251
• /
• 2010

Estrogen related receptor $\beta$(Esrrb)는 오르판 수용체 중 하나로 전분화능 관련유전자인 Oct4와 Nanog의 발현을 조절함으로써 줄기세포의 미분화를 유지시키고, 지속적인 자기 복제를 가능케 하는 유전자로 알려져 있다. 또한 Feng 등 (2009)은 체세포에 Oct4, Sox2와 함께 Esrrb 유전자를 함께 도입하면, 유전자가 변형된 체세포가 배아 줄기세포와 유사한 유도만능줄기세포로 리프로그래밍(reprograming)되어 진다는 결과를 보고한 바 있다. 본 연구에서는 인간 ESRRB 단백질을 양수유래줄기세포 내로 직접도입하는 방법을 개발하고, 이를 통해 전분화능 관련유전자의 기능 조절을 확인하고자 하였다. 클로닝 된 인간 short-form ESRRB를 세포투과 펩타이드(cell-penetrating peptide, CPP)의 일종인 R7(아르기닌 7개)에 접합(Fusion)하였고, 합성단백질 (R7-ESRRB-His6)의 형태로 배양중인 인간 양수 유래 줄기세포에 처리하여 세포내로 도입하였다. R7-ESRRB-His6 단백질은 5시간 내에 세포막을 통과하였고, 24시간 내에 핵 내로 이동하였다. 또한 핵 내로 이동한 ESRRB 단백질은 OCT4와 NANOG 유전자의 발현을 증가시켰을 뿐만 아니라, 또 다른 전분화능 관련유전자인 SOX2의 발현도 함께 증가시킨다는 것을 확인하였다. 이상의 결과는 세포투과 펩타이드와 유전자의 접합을 통해 생산된 R7-ESRRB-His6 합성단백질이 양수유래줄기세포내로 원활하게 도입되는 것을 확인하였고, 유전자의 변형 없이 전분화능 관련유전자의 기능을 조절할 수 있는 방법임을 확인하였다.