• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.505-505
• /
• 2011

The control of wettability of thin films is of great importance and its success surely brings us huge applications such as self-cleaning, antifogging and bio-passive treatments. Usually, the control is accomplished by modifying either surface energy or surface topography of films. In general, hydrophobic surface can be produced by coating low surface energy materials such as fluoropolymer or by increasing surface roughness. In contrast, to enhance the hydrophillicity of solid surfaces, high surface energy and smoothness are required. Silica (SiO2) is environmentally safe, harmless to human body and excellently inert to most chemicals. Also its chemical composition is made up of the most abundant elements on the earth's crest, which means that SiO2 is inherently economical in synthesis. Moreover, modification in chemistry of SiO2 into various inorganic-organic hybrid materials and synthesis of films are easily undertaken with the sol-gel process. The contact angle of water on a flat silica surface on which the Young's equation operates shows ~50o. This is a slightly hydrophilic surface. Many attempts have been made to enhance hydrophilicity of silica surfaces. In recent years, superhydrophilic and antireflective coatings of silica were fabricated from silica nanoparticles and polyelectrolytes via a layer-by-layer assembly and postcalcination treatment. This coating layer has a high transmittance value of 97.1% and a short water spread time to flat of <0.5 s, indicating that both antireflective and superhydrophilic functions were realized on the silica surfaces. In this study, we assessed hydrophillicity and hydrophobicity of silica coating layers that were synthesized using the sol-gel process. Systematic changes of processing parameters greatly influence their surface properties.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.6
• /
• pp.1073-1081
• /
• 2010

Objectives : The purpose of this study was to examine the oral health awareness and practice of workers. Methods : The subjects in this study were 200 workers in a working place located in Taean-gun, Chung-Nam Province. The data for this study was obtained by means of a self-administered questionnaire. Results : 1. An average of awareness for the oral health of workers was $2.60{\pm}0.44$ points out of 4. They were most aware of the item that toothbrushing should be done after meals($3.06{\pm}0.42$), and the second most widely recognized item was that toothbrushing should be done before bedtime($2.73{\pm}0.60$). 2. An average of practice for the oral health of workers was $2.54{\pm}0.32$ points out of 4. They did the best was brushing their teeth after meals($2.97{\pm}0.33$), followed by cleaning the tongue during toothbrushing($2.91{\pm}0.45$). 3. Awareness of oral health was significantly higher in such groups, including the female, college graduates, unmarried(p<0.05). 4. Practice of oral health was significantly higher in such groups, including the female, college graduates(p<0.05). Conclusions : To reform and improve of the system, incremental oral health care system for workers is needed. and oral health education is needed to increase the motivation of workers to control their basic dental disease.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.1
• /
• pp.11-18
• /
• 2016

Objectives: The purpose of the study was to compare the oral health related characteristics between a long-term patients and general population. Methods: A direct interview questionnaire was completed by 160 patients and 165 general people from January 16 to April 31, 2014. The questionnaire consisted of general characteristics of the subjects, subjective health status, oral health behaviors, and needs of oral health. The data were analyzed using SPSS 18.0 program. Results: The long-term patients reported that most of them were denture wearers(38.1%), and had oral disease symptoms(62.5%) and xerostomia(65.6%). Most of the long-term patients were ex-smoker(31.3%) and did not receive regular dental check-up(92.5%). They did not know tooth brushing method(31.3%) and brushed their teeth less than twice a day(47.5%). Those who used tooth brush for more than 6 months accounted for 47.5%. Most of them did not use auxiliary oral hygiene devices(85.6%). The patients answered that oral health is not important(6.9%), oral health education is not necessary(7.5%), and oral cleaning(26.3%) should be included in oral health education. Conclusions: The self-reported oral health status of the long-term patients much more serious than the general population. It is necessary to educate the continuing oral health management program for the long-term patients.

• Applied Microscopy
• /
• v.42 no.2
• /
• pp.95-103
• /
• 2012

The cell surface sculpture of the plant epidermis has received great interest recently. It has also been an active area of research, as the biological microstructures of the surface, such as papillae and waxes, exhibit several unique properties, including self-cleaning character; namely the "Lotus effect" first described in the leaves of the lotus, Nelumbo nucifera. The Lotus effect is the phenomenon in which the super-hydrophobic and water-repellent nature of lotus leaves allow water drops to run off easily on the surface in a rolling and sliding motion thereby facilitating the removal of dirt particles. It is well-known that surface roughness on the micro- and nanoscale is a primary characteristic allowing for the Lotus effect. This effect is common among plants and is of great technological importance, since it can be applied industrially in numerous fields. In the present study, Nelumbo nucifera leaf and stem epidermal surfaces have been examined with a focus on the features of papillae and wax crystalloids. Both young and mature Nelumbo nucifera leaf epidermis demonstrated the Lotus effect on their entire epidermal surface. The central area of the upper epidermis, in particular, formed extremely papillose surfaces, with an additional wax layer, enabling greater water repellency. Despite the presence of wax crystalloids, epidermal surfaces of the lower leaf and stem lacking papillae, were much more easily wetted.

• Korean Journal of Community Nutrition
• /
• v.15 no.4
• /
• pp.475-484
• /
• 2010

The purpose of this study was to evaluate the effect of the nutrition education on preschool children's nutrition knowledge and behaviors. The study subjects were preschool children attending J kindergarten located in Wonju. Each of the control group and the education group consisted of 49 children and the education group was exposed to nutrition education while the control group did not. The nutrition education intervention lasted 9 weeks weekly basis. The t-test for the homogeneity of each group showed no meaningful difference at the beginning point of nutrition education. After nutrition education a test of nutrition knowledge using picture-questionnaire was carried out by the researcher for the subjects of education group and control group and the caretakers of the education group were offered self-administered questionnaire on the changes in children's dietary behaviors. The results of the study were as follows: 1. Nutrition education intervention showed a meaningful difference in children's understanding nutrition; the kinds and function of food, the relationship between food and body, the function of nutrients and enhanced their idea on hygiene compared to the control group (p < p.005). 2. However, nutrition education intervention made no statistically meaningful difference in children's dietary behaviors such as having breakfast, keeping balanced diet, washing hands before meals, saying "thanks" before and after meals, cleaning the table after meals, brushing teeth after meals and so on. Therefore, we found that it is hard to expect children to correct their dietary behaviors in such a short period of 9 weeks and nutrition education for preschool children should be offered to caretakers at the same time.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.294-303
• /
• 2016

Purpose: This study aimed to evaluate the profitability of four selective mechanization systems in rice cultivation. Methods: Field experiments were conducted in the farmers' field during the wet season (June to November) of 2015 in Bangladesh. Mechanization systems were applied to evaluate four different selective levels (treatment) in eleven consequent operations. Seedlings were raised in a traditional seedbed and trays for manual and mechanical transplanting, respectively. Land preparation, irrigation, fertilizer, pesticide, carrying, and threshing and cleaning operations were performed using the same method in all the experimental plots. The mechanical options in the transplanting, weeding, and harvesting operations were changed. The mechanization systems were $S_1$ = hand transplanting + hand weeding + harvesting by sickle, $S_2$ = mechanical transplanting + Bangladesh Rice Research Institute (BRRI) weeder + reaper, $S_3$ = mechanical transplanting + BRRI power weeder + reaper, and $S_4$ = mechanical transplanting + herbicide + reaper. This experiment was performed in a randomized complete block design with four replications. Power tiller, rice transplanter, BRRI weeder, BRRI power weeder, self-propelled reaper, BRRI open drum thresher, and BRRI winnower were used in the respective operations. Accordingly, the techno-economic performances of the different technologies were calculated and compared with those of the traditional system. Results: The mechanically transplanted plot produced 6-10% more yield than the hand transplanted plot because of the use of tender-aged seedlings. Mechanical transplanting reduced 61% labor and 18% cost compared to manual transplanting. The BRRI weeder, BRRI power weeder, and herbicide application reduced 74, 91, and 98% labor, respectively. The latter also saved 72, 63, and 82% cost, respectively, compared to hand weeding. Herbicide application reduced the substantial amount of labor and cost in the weeding operation. Mechanical harvesting also saved 96% labor and 72% cost compared to the traditional method of harvesting using sickle. Selective mechanization saved 15-17% input cost compared to the traditional method of rice cultivation. Conclusions: Mechanical transplanting with the safe use of herbicide and harvesting by reaper is the most cost- and labor-saving operation. The method might be the recommended set of selective mechanization for enhancing productivity.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.475-482
• /
• 2011

In this research, we have attempted to estimate the water quality of fish farms in terms of parameters such as water temperature, dissolved oxygen, pH, and salinity by employing observational data obtained from a coastal ocean observatory of a national institution located close to the fish farm. We requested and received marine data comprising nine factors including water temperature from Korea Hydrographic and Oceanographic Administration. For verifying our results, we also established an experimental fish farm in which we directly placed the sensor module of an optical mode, YSI-6920V2, used for self-cleaning inside fish tanks and used the data measured and recorded by a environment monitoring system that was communicating serially with the sensor module. We investigated the differences in water temperature and salinity among three areas - Goheung Balpo, Yeosu Odongdo, and the experimental fish farm, Keumho. Water temperature did not exhibit significant differences but there was a difference in salinity (significance <5%). Further, multiple regression analysis was performed to estimate the water quality of the fish farm at Keumho based on the data of Goheung Balpo. The water temperature and dissolved-oxygen estimations had multiple regression linear relationships with coefficients of determination of 98% and 89%, respectively. However, in the case of the pH and salinity estimated using the oceanic environment with nine factors, the adjusted coefficient of determination was very low at less than 10%, and it was therefore difficult to predict the values. We plotted the predicted and measured values by employing the estimated regression equation and found them to fit very well; the values were close to the regression line. We have demonstrated that if statistical model equations that fit well are used, the expense of fish-farm sensor and system installations, maintenances, and repairs, which is a major issue with existing environmental information monitoring systems of marine farming areas, can be reduced, thereby making it easier for fish farmers to monitor aquaculture and mariculture environments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.86-86
• /
• 2010

Micro- and nanoscale texturing and control of surface energy have been considered for superhydrophobicity on polymer and silicon. However these surfaces have been reported to be difficult to meet the robustness and transparency requirements for further applications, from self cleaning windows to biochip technology. Here we provided a novel method to fabricate a nearly superhydrophobic soda-lime glass using two-step method. The first step involved wet etching process to fabricate micro-sale patterns on soda-lime glass. The second step involved application of $SiO_x$-incorporated DLC to generate high intrinsic contact angle on the surface using chemical vapor deposition (CVD) process. To investigate the effect of surface roughness, we used both positive and negative micro-scale patterns on soda-limeglass, which is relatively hard for surface texturing in comparison to quartz or Pyrex glasses due to the presence of impurities, but cheaper. For all samples we tested the static wetting angle and transparency before and after 100 cycles of wear test using woolen steel. The surface morphology is observed using optical and scanning electron microscope (SEM). The results shows that negative patterns had a greater wear resistance while the hydrophobicity was best achieved using positive patterns having static contact angle up to 140 deg. with about 80% transparency. The overall experiment shows that positive patterns at etching time of 1 min shows the optimum transparency and hydrophobicity. The optimization of micro-scale pattern to achieve a robust, transparent, superhydrophobic soda-lime glass will be further investigated in the future works.

• Textile Coloration and Finishing
• /
• v.30 no.4
• /
• pp.245-255
• /
• 2018

In this study, cotton fabrics were coated with $TiO_2$ nanoparticles using 3-mercaptopropyltrimethoxysilane(3-MPTMS), which is highly reactive to cotton fabrics, as a medium, and the characteristics, antimicrobial properties, and photodegradation properties of the fibers were measured. The manufacturing process is as follows. (1) 3-MPTMS was added to isopropanol, and $TiO_2$ colloid was added to the mixture to prepare a solution. (2) Cellulose fibers were immersed in the prepared $3-MPTMS/TiO_2$ solution, stirred for 90 minutes at $45^{\circ}C$ in a constant temperature water bath, and dried thereafter. In order to identify the morphology of the cellulose fibers coated with $TiO_2$ nanoparticles, the surface was observed with a scanning electron microscope(SEM), and SEM-EDS was measured to identify the adhesion of $TiO_2$ nanoparticles. The SEM images showed $TiO_2$ nanoparticle and 3-MPTMS coated layers on the fibers and it was identified that $TiO_2$ nanoparticles were attached to the cellulose fibers. The antimicrobial activity of $3-MPTMS/TiO_2$-treated cotton fabrics was measured using a bacterial reduction method. $3-MPTMS/TiO_2$ cellulose fibers which was irradiated by ultra violet light, showed antimicrobial activity against Escherichia coli(ATCC 43895) and Staphylococcus aureus(ATCCBAA-1707) unlike unirradiated fibers. The cellulose fibers were stained with methylene blue and the photodegradation performance of the stained fabrics was analyzed. The stained fabrics showed high degradation performance with photolytic reactions of $TiO_2$ nanoparticles.

• Membrane and Water Treatment
• /
• v.10 no.4
• /
• pp.287-298
• /
• 2019

Lotus leaf has a special dual micro and nano surface structure which gives its highly hydrophobic surface characteristics and so-called self cleaning effect. In order to endow PVDF hollow fiber membrane with this special structure and improve the hydrophobicity of membrane surface, PVDF hollow fiber composite membranes was obtained through the immersion coating of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) dilute solution on the outside surface of PVDF support membrane. The prepared PVDF composite membranes were used in the vacuum membrane distillation (VMD) for the desalination. The effects of PVDF-HFP dilute solution concentration in the dope solution and coating time on VMD separation performance was studied. Membranes were characterized by SEM, WCA measurement, porosity, and liquid entry pressure of water. VMD test was carried out using $35g{\cdot}L^{-1}$ NaCl aqueous solution as the feed solution at feed temperature of $30^{\circ}C$ and the permeate pressure of 31.3 kPa. The vapour flux reached a maximum when PVDF-HFP concentration in the dilute solution was 5 wt% and the coating time was kept in the range of 10-60 s. This was attributed to the well configuration of micro-nano rods which was similar with the dual micro-nano structure on the lotus leaf. Compared with the original PVDF membrane, the salt rejection can be well maintained which was greater than 99.99 % meanwhile permeation water conductivity was kept at a low value of $7-9{\mu}S{\cdot}cm^{-1}$ during the continuous testing for 360 h.