• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.618-623
• /
• 2008

Due to recent trends of the atypical plan shapes and the zoning construction in high-rise buildings, the building stability under construction is arising as an important issue for design and construction plan. To ensure the stability under construction, the differential column shortening and the lateral movements with unbalanced distributions of self-weight of structure members and the load flows before completion of member connections and lateral load resisting system should be checked by construction sequence analysis. This paper presents the scheme of zone-based construction sequence analysis, to check the stability of high-rise building under construction. This scheme is applied to the construction sequence analysis for real high-rise building under construction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.275-280
• /
• 1998

In this study, to increase fluidity and resistance of segregation of materials, the effect of each of the materials, which have effects on high performance concrete from investigating the properties of strength and drying shrinkage of high performance concrete made by the basic mix proportion used fly-ash and ground granulated blast-furnace slag after hardening, has been checked. By the results of this experiment, fluidity on W/C=34% was satisfied within slump-flow 65$\pm$5cm and U-type self-compacting difference 5cm. On the properties of strength, high performance concrete produced compressive strength over 400kg/$\textrm{cm}^2$ in 28days when powder was replaced by 40% of fly-ash and 60% of ground granulated blast-furnace slag. And compressive strength was taken over 600kg/$\textrm{cm}^2$ equal to non-replacement in 91days. Also, the length change of concrete with the addition of fly-ash was smaller than that without it. Therefore, it may be effective on the decrease of drying shrinkage volume.

• 한국지능시스템학회논문지
• /
• 제5권2호
• /
• pp.58-69
• /
• 1995

본 논문에서는 자기조정 퍼지제어기의 한 설계기법을 제안하고, 이를 전력계통 안정화에 적용하였다. 제안된 퍼지제어기의 파라미터는 최급강하법에 의하여 멤버쉽 함수의 중심치와 폭이 최적인 값으로 자지고정 되어진다. 이를 전력계통에 적용한 결과 제안된 제어기법이 종래의 제어기법보다 응답특성이 우수함을 보였다.

• 한국병원경영학회지
• /
• 제1권1호
• /
• pp.136-153
• /
• 1996

The purpose of this study is to identify the factors hindering hospital reengineering project in one university hospital. The data was collected by the self-administered Questionnaire to 288 members of the hospital in Pusan on April 5-18, 1996. This study took some statistical methodologies, such as descriptive analysis, factor analysis and logit model analysis. The results were as follows; First, in the descriptive analysis for whether the hospital reengineering named RUSH94 was a success or not, the subjects judged that it was not successful and regarded their fable mutual communication as the main factor. Second, in the reason of failure at the reengineering project, the group who thought that the failure factor was the lack of mutual consensus checked the scores of the first factor produced from the factor analysis.

• Structural Engineering and Mechanics
• /
• 제57권4호
• /
• pp.763-783
• /
• 2016

A methodology based on Teaching Learning-Based Optimization (TLBO) algorithm is proposed for optimum design of reinforced concrete retaining walls. The objective function is to minimize total material cost including concrete and steel per unit length of the retaining walls. The requirements of the American Concrete Institute (ACI 318-05-Building code requirements for structural concrete) are considered for reinforced concrete (RC) design. During the optimization process, totally twenty-nine design constraints composed from stability, flexural moment capacity, shear strength capacity and RC design requirements such as minimum and maximum reinforcement ratio, development length of reinforcement are checked. Comparing to other nature-inspired algorithm, TLBO is a simple algorithm without parameters entered by users and self-adjusting ranges without intervention of users. In numerical examples, a retaining wall taken from the documented researches is optimized and the several effects (backfill slope angle, internal friction angle of retaining soil and surcharge load) on the optimum results are also investigated in the study. As a conclusion, TLBO based methods are feasible.

• 대한가정학회지
• /
• 제31권3호
• /
• pp.213-222
• /
• 1993

The purpose of this study was to investigate the present conditions of thermal environment in small-size apartments. The research methods used were measuring of environmental elements and personal self-administration for the residents' thermal comfort responses. The house subjected were 25 peung apartments facing southeast and southwest directions. The results of this study were summarized as follow ; The indoor temperature and humidity of houses subjected were 25.0∼27.3℃, 37.1∼42.5%. Compared with the distribution of indoor temperature and globe temperature of houses subjected, those of southeast house were more stable. And in the residents' thermal sensation responses, the residents of southeast houses checked more often neutral zone. Therefore the thermal environment of southeast houses were more comfortable condition than southwest houses.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.497-504
• /
• 2009

DLC is considered as the candidate material for application of moving parts in automotive components relatively in high pressure and temperature operating conditions for its high hardness with self lubrication and chemical inertness. Different deposition method such as arc plating, ion gun plating and PECVD were used for comparing mechanical and tribological properties of each DLCs deposited on stainless steel with 1 um thick respectively. Among these 3 types of DLCs, the arc plated DLC film showed highest value for wear resistance in dry condition. From the results of analysis for physical properties of DLC films, it seems that the adhesion force and crack initiation modes were more important factors than intrinsic mechanical properties such as hardness, elastic modulus and/or roughness to the wear resistance of DLC films. Raman spectroscopy was used for understanding chemical bonding natures of each type of DLC films. Typical D and G peaks were identified based on the deposition method. Hardness of the coating layers were identified by nanoindentation method and the adhesions were checked by scratch method.

• Corrosion Science and Technology
• /
• 제10권2호
• /
• pp.65-70
• /
• 2011

DLC is considered as the candidate material for application of moving parts in automotive components relatively in high pressure and temperature operating conditions for its high hardness with self lubrication and chemical inertness. The properties of interlayer between the substrate and the DLC film were studied. Arc ion plating method have been employed to deposit onto substrate and sputtering method was used for synthesizing DLC onto interlayer. Among these six types of interlayer, deposited DLC film onto TiCN showed excellent value for characteristics. From the results of analysis for physical properties of DLC films, it seems that the adhesion forces were more important factors than intrinsic mechanical properties such as hardness, roughness and wear resistance of DLC films. AFM(Atomic Force Microscope) was used for understanding roughness of DLC films. Hardnesses of the coating layers were identified by nano-indentation method and adhesions were checked by scratch method.

• 근관절건강학회지
• /
• 제18권1호
• /
• pp.5-15
• /
• 2011

Purpose: Osteoporosis is often considered as a women's disease, but men's osteoporosis is also increasingly recognized as an important public health problem. This study was carried out to identify the important modifiable risk factors for osteoporosis in men. Methods: Two hundred and fourteen men were selected among those who checked bone mineral density by dual energy x-ray absorptiometry in lumbar vertebrae from June to September, 2009 at 3 general hospitals in Busan. Self-administrated questionnaires and BMD results of lumbar vertebrae were used for data. Collected data were analyzed by using SPSS 14.0 program. Results: The sports activity level in 30's, body weight, and fracture history of mother were the most powerful influencing factors on the bone mineral density of lumbar vertebrae. Conclusion: These results highlight the need to participate vigorously in sports activity during 30s as a means of increasing peak bone mass in lumbar vertebrae in order to prevent osteoporosis and fracture in men.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.422-423
• /
• 2019

In accordance with the Carbon-Free Island by 2030 policy of Jeju Special Self-Governing Province, renewable energy sources are increasing in Jejudo Island. Due to the intermittent output characteristics of wind turbines, one of the renewable energy sources, which can cause unbalanced system conditions between the demand load and the power generation of Jejudo Island. The Korea Power Exchange limits the output of wind turbines for stabilizing the Jeju power system. Therefore, this paper proposes a method to supply a limited output of Sangmyeong Wind Farm in Jeju Power system to Energy Storage System(ESS) and Water Electrolysis Device(WED). The voltage and frequency fluctuation of the Jeju power system is checked accordingly. The simulation results are performed using the PSCAD/EMTDC program.