• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1853-1857
• /
• 2005

This paper reports on the development of the gripping system for automation of phone-camera module assembling. If manual assembling is shifted by automation, it will increase the fabrication speed and reduce the defective rate. In the gripping mechanism design, we needs self-adjustable passive mechanism that minimize the number of the parts. The self-adjusting system compensates the positioning errors that have been made in translations. And also we need gripper system that can be modules of parts. That makes it easy to change or repair the parts. The forces put on the objects is another considerable in the system. It must not cause dropping, breakage, scratch, and large deformation. So final target of this reaseach is how to develop the system that is speedy, small, simple, and safe

• 대한치주과학회:학술대회논문집
• /
• 2006.11a
• /
• pp.9-10
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• v.21 no.2
• /
• pp.221-227
• /
• 2000

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.426-427
• /
• 2007

Here we describe the formation of a self-assembled film of thin multiwalled carbon Nanotubes(t-MWNT) modified with hydroxy groups through hydrogen peroxide treatment. Morphologies of t-MWNT films could be controlled by the various coating method, such as filtering, drop casting, spraying method, etc. The results show that on densification of the CNT suspension during drying, multiple hydroxy group-modified MWNTs can be self-assembled through strong surface hydrogen bond interaction while MWNTs usually exist an entangled state in the film. The interaction between t-MWNT was illustrated from Raman spectrum of spray coated films.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2005.05a
• /
• pp.88-92
• /
• 2005

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.494-496
• /
• 2004

Due to a typhoon named MAEMI on Sep12, 2004, 7 transmission towers collapsed and 3 were damaged in the Gyeongnam and Busan areas. These caused long-term black-outs in Goeje-do. When a transmission tower collapses or is damaged, Construction will take more than 2 months and this will be accompanied by long-term black-outs. Therefore a temporary iron pole is used in such emergencies. Current temporary rehabilitation angle steel iron Pole consistes of around 800 members, 2,800 bolts and it takes about 5 days to construct a temporary transmission line. Consiquently wide black-outs occur during the construction of the temporary transmission line. To reduce black-out time, the construction period must be reduced as much as possible. This paper presents new methods to reduce temporary transmission line construction time to within 48 hours by applying a self-reliance assembling method instead of the current man power assembling method and by modulizing each angle steel with duralumin.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.3
• /
• pp.53-57
• /
• 2011

In the modern packaging technologies highly condensed metal interconnects are typically formed by highcost processes. These methods inevitably require the precise controls of mutually dependant process parameters, which usually cause the difficulty of the change in the layout design for interconnects of chip to-chip, or chip-to-substrate. In order to overcome these problems, the unique concept and methodology of self-assembly even in micro-meter scale were developed. In this report we focus on the factors which influenced the self-formed bumps by analyzing the phenomenon experimentally. In case of RMA flux, homogenous pattern was obtained in both plain surface and cross-section surface observation. By using RA flux, the phenomena were accelerated although the self-formtion results was inhomogenous. With ussage of moderate RA flux, reaction rate of the self-formation was accelerated with homogeneous pattern.

• Macromolecular Research
• /
• v.9 no.4
• /
• pp.185-196
• /
• 2001

The self-assembly of block copolymers can lead to a variety of ordered structures on a nanometer scale. In this article, the self-assembling behaviors of triblock copolymers in the melt and the selective solvent are described with the results obtained from the computer simulations. With the advances of computing power, computer simulations using molecular dynamics and Monte Carlo techniques make it possible to study very complicated phenomena observed in the self-assembly of triblock copolymer. 13king full advantage of the computer simulation based on well-defined model, the effects of various structural and thermodynamic parameters such as the copolymer composition, the block sequence, the pairwise interaction energies, and temperature on the self-assembly are discussed in some detail. Some simulation results are compared with experimental ones End analyzed by comparing them with the theoretical treatment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.22-23
• /
• 2011

As device dimensions shrink, it is increasingly important to develop fabrication methods that can create sub-15 nm features of regular or arbitrary geometry in a rapid, parallel, and efficient process. This talk will discuss approaches based on self-assembling hybrid polymers containing Si. The thin films of those materials systems can generate well-ordered periodic arrays of dots or lines. For achieving, long-range ordering, it is helpful to use lithographically-defined templates, which are in general much larger than the length-scale of self-assembled nanostructures. For example, the self-assembly of polymer nanostructures can easily be templated using an array of nanoscale topographical elements that act as guiding templates or surrogates for one of two microdomains. The solvent-vapor-induced tunability of pattern dimension and morphology will be discussed as well. Those material systems can excellently serve for high-precision self-assembly that can provide good resolution, reliability, and controllability and be considered as an option for a future nanomanufacturing technology.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.21-23
• /
• 2002

In this paper, the electrochemical behavior of Viologen self assembly monolayer has been investigated with QCM, which has been known as nano-gram order mass detector. The self assemvly process of Viologen was monitored using resonant frequency $({\Delta}F)$ and resonant resistance(R). QCM measurements indicated a mass adsorption for Viologen assembling on the gold sufrace with a frequency change about 135[Hz] and calculated its surface coverage($\Gamma$) to be $3.5273{\times}10^{-9}[mol/cm^{2}]$. Also reversible redox process was observed and analyzed with ionic interaction at the Viologen/solution interface using ${\Delta}F$.